• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.713-720
• /
• 2006

To analyze atmospheric fate of PCBs in the Kanto region, Japan, an one-compartment box model was used and the relationship between behavior of each PCB homologue and air temperature was simulated. In addition, the emission rates and the deposition fluxes in the overall Kanto region were estimated by the model. The total emission rate and deposition flux was 3,320 kg/yr and 1,480 kg/yr, respectively. The contribution of advection was ranged from 22 to 38% among elimination processes(advection, dry & wet deposition and degradation) of PCBs from atmosphere. The rates of degradation(OH radical process) for PCBs in the Kanto region would be negligible. This study showed that one-compartment box model can be available to understand the overall atmospheric behavior of PCBs.

• Communications of Mathematical Education
• /
• v.25 no.3
• /
• pp.607-627
• /
• 2011

The purpose of this study is to analyse teaching and learning effects of the structural-mapping used instruction and to find out the characteristics of problem solving process in permutation and combination. For this study, two classes of 11th grade students(67 students) were randomly selected from S high school in D city. One of them was assigned to the experimental group and the other to the control group, respectively. Four lectures of the structural-mapping used instruction were carried out in the experimental group and same amount of lectures of the text book oriented instruction were carried out in the control group. The research findings are as follows. First, the structural-mapping used instruction is shown to be more effective in achievement than the traditional textbook-oriented instruction. Second, the ball-box model is found out to be easier and simpler than the selection-distribution model. Third, students who used the ball-box model are properly able to use both model.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.289-295
• /
• 2013

The capacity of a pressure fan can be designed based on the air flow resistance of containers packed with fruits and vegetables in a pressure cooling system. This study was conducted to develop an air flow resistance model that was dependent on changes in the air flow rate and the method of stacking containers. The air flow resistance of a container packed with uniformly shaped balls was 1.5 times greater than the sum of the air flow resistance of a vacant container and that of a wire net container packed with only balls. In addition, the air flow resistance increased exponentially as the width of the stacks increased; however, the air flow resistance did not increase greatly as the length and height of the stacks increased, which indicates that the air flow resistance is primarily influenced by the width of the stack in the air flow direction. The air flow resistance in two lines of stacking was up to 17% less than that of the width of the stack. It was also possible to determine the air flow resistance using a function of the air flow resistance through a single container and develop a prediction model. A prediction model of air flow resistance that is dependent on the stacking method and the air flow resistance of a single container was developed.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.9-14
• /
• 2009

In this work applicability of a sharp-interface model to well-scale problems is examined. In coastal areas one of the main concerns in groundwater development is saltwater intrusion. To determine the saltwater intrusion at a well one needs to evaluate the saltwater content from a pumping well. We conducted laboratory sand-tank experiments to determine if a sharp-interface model can simulate the saltwater content of a pumping well. Lateral saltwater intrusion experiments and freshwater lens experiments are conducted. A partially penetrating well and a fully penetrating well are used. Comparison between numerical results and observation results indicates that the sharp-interface model can determine saltwater contents reasonably well. We conclude that a sharp-interface model can be applied to well-scale groundwater flow problems in coastal areas.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.88-97
• /
• 2011

For Korean design provisions are not equipped for skewed steel box girder bridges, when American provisions are adopted, load distribution factors different from real behavior are determinated. Furthermore the possibility of over or under estimated bridge design involves. The aim of this study is to provide more rational load distribution factor formulas based on real behavior for shear at obtuse corner of skewed steel box girder bridges. In order to accomplish the aim finite element analysis for a variety of skewed steel box girder bridge structural models is carried out, and each parameters degree of influence on wheel load distribution factors of skewed steel box girder bridges are analyzed. Then multiple regression analysis is fulfilled in order to propose formulas for determinating shear force load distribution factor of skewed steel box girder bridges.

• Composites Research
• /
• v.19 no.5
• /
• pp.1-6
• /
• 2006

In this study, a closed-form analysis has been developed for the transverse shear behavior of thin-walled composite beams with closed cross-sections. The shear flow distributions and cross-section stiffness coefficients are derived analytically by using a mixed beam approach. The theory has been applied to single-celled composite box-beams with elastic couplings. The location of the shear center and the effect of transverse shear deformation on the static behavior of composite beams are investigated in the framework of the analysis. The present results are validated against those of a two-dimensional finite element analysis and a good correlation has been obtained for box-beam cases considered in this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.4 s.56
• /
• pp.148-158
• /
• 2009

Firstly the problems of existing foreign code concerning wheel load distribution factor for skew box girder bridges have been examined, and the main parameters which have effects on wheel load distribution factors are evaluated in this study. Further finite element analyses on various skew steel box girder bridges are carried out. Based on the analysis results, formulas to determine wheel load distribution factors are proposed using multiple regression analysis. It is found when using the proposed formulas in this study weak points of existing specifications could be improved and also time spent at structural analysis should be saved a lot, so that the validity and practicality could be verified.

• Composites Research
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2002

In this study, the flutter analysis for a rectangular box wing and an actual fighter wing with composite shin, aluminum spar and aluminum rib has been conducted. A conservative 3D wing-box model of an actual wing is modeled by MSC/PATRAN and the corresponding free vibration analysis has been performed by MSC/NASTRAN. The finite elements of membrane, rod and shear panel are used. Using the practical ply angles, various composite laminates are composed and analysed. The DLM code which is linear aerodynamic theory in frequency domain is applied to calculate unsteady aerodynamic pressure in subsonic flow region and the V-g and p-k methods are applied to obtain the solution of aeroelastic governing equation in frequency domain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.50-55
• /
• 1995

진동하는 경계면의 진동장 및 음장을 재구성하기 위하여 음장측정치 및 경계요소법을 이용한 음향 홀로그래피 방법을 연구하였다. 특히, 측정잡음 및 전달행렬의 특이성에 의해 발생하는 재구성 오차에 대하여 고찰하였다. 재구성의 정확도를 나타내기 위하여 전달행렬의 특이인자를 도입하였다. 예제로 한면이 진동하는 직육면체 상자를 고려하였다. 결과로부터 매우 작은 측정잡음에 대해서도 전달행렬의 특이성 재구성 오차가 크게 발생하며, 측정위치에 따라 전달행렬의 특이성이 크게 영향 받음을 확인하였다. EfI방법을 이용하여 최적의 측정점을 선택한 결과 전달행렬의 특이성을 크게 줄일 수 있었으며 이때 측정점의 위치는 가진주파수에 관계없이 큰 음장이 형성되는 소음원의 근접장에 위치함을 알 수 있다. 또한 저주파 가진에 비해 고주파 가진이 작은 특이인자값을 나타내며, 따라서 재구성 오차가 작음을 알 수 있었다. 재구성장의 정밀도를 향상시키기 위하여, 부가적으로 진동장의 norm을 제한하는 적절화방법을 도입하였다. 모델의 최소자승오차를 최소화 하는 최적의 적절화변수를 추정하여 이로부터 재구성 오차를 줄일 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.6
• /
• pp.161-172
• /
• 2000

자연암석절리 및 인공 절리에 대하여 일정수직응력제어, 일정 수직하중제어 그리고 무한 강성제어가 가능한 암석 절리면 전단기 시험기를 개발하였다. 이 시험기는 전단변위에 의한 첩촉면적의 변화량을 계산하여 하중변화량을 조절하여 일정수직응력상태를 유지한다. 수직하중에 따른 시험기 강성에 의한 변화향이 제어 프로그램 내에서 제어되어 순수한 시편의 변위량을 출력하도록 하였다. 전단하중에 따른 시험기 강성에 의한 변위량은 상, 하부 전단상자의 상대변위 측정으로 최소화하였다. 전단거동 중의 자유도는 전당방향에 대하여 수평이도, 연직이동, 피칭, 롤링이 가능하도록 하였다. 자연절리면을 모사한 석고시편에 대하여 일정 수직응력 제어, 일정수직하중제어 그리고 무한 강성제어 조건으로 시험하여 제어상태 검증 및 비교를 하였다. 또한 경사각이 16.7˚와 22.6˚인 톱니형 시편에 대하여 시험한 결과 경사각 16.7˚와 22.6˚는 JRC로 10과 15를 나타내었으며, 첨두팽창각이 첨두전단강도에서 발생되며, Barton의 모델과 잘 일치함을 보였다.