• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.280-288
• /
• 2007

This paper is based on the safety case as specified in the E&M system safety management plan established in initially AREX project. The safety case for E&M system is the synthesis of all safety activities throughout the design, manufacturing, installation and commissioning test for E&M system. The safety level of E&M system which is required by E&M contract is assured by accomplishment of safety activities and procedures in accordance with EN standards.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.145-176
• /
• 2016

Aviation safety can be secured through regulations and policies of various areas and thorough execution of them on the field. Recently, for aviation safety management Korea is making efforts to prevent aviation accidents by taking various measures: such as selecting and promoting major strategic goals for each sector; establishing National Aviation Safety Program, including the Second Basic Plan for Aviation Policy; and improving aviation related legislations. Obstacle limitation surface is to be established and publicly notified to ensure safe take-off and landing as well as aviation safety during the circling of aircraft around airports. This study intends to review current aviation obstacle management system which was designed to make sure that buildings and structures do not exceed the height of obstacle limitation surface and identify its operating problems based on my field experience. Also, in this study, I would like to propose ways to improve the system in legal and regulatory aspects. Nowadays, due to the request of residents in the vicinity of airports, discussions and studies on aviational review are being actively carried out. Also, related ordinance and specific procedures will be established soon. However, in addition to this, I would like to propose the ways to improve shortcomings of current system caused by the lack of regulations and legislations for obstacle management. In order to execute obstacle limitation surface regulation, there has to be limits on constructing new buildings, causing real restriction for the residents living in the vicinity of airports on exercising their property rights. In this sense, it is regarded as a sensitive issue since a number of related civil complaints are filed and swift but accurate decision making is required. According to Aviation Act, currently airport operators are handling this task under the cooperation with local governments. Thus, administrative activities of local governments that have the authority to give permits for installation of buildings and structures are critically important. The law requires to carry out precise surveying of vast area and to report the outcome to the government every five years. However, there can be many problems, such as changes in the number of obstacles due to the error in the survey, or failure to apply for consultation with local governments on the exercise of construction permission. However, there is neither standards for allowable errors, preventive measures, nor penalty for the violation of appropriate procedures. As such, only follow-up measures can be taken. Nevertheless, once construction of a building is completed violating the obstacle limitation surface, practically it is difficult to take any measures, including the elimination of the building, because the owner of the building would have been following legal process for the construction by getting permit from the government. In order to address this problem, I believe penalty provision for the violation of Aviation Act needs to be added. Also, it is required to apply the same standards of allowable error stipulated in Building Act to precise surveying in the aviation field. Hence, I would like to propose the ways to improve current system in an effective manner.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.638-642
• /
• 2017

FOD is a generic term for substances with potential threats that can pose a fatal risk to aircraft. Therefore, FOD should be noted in all areas of the airport. Especially, the method of detecting and collecting FOD in runway and aircraft movements is very low efficiency and economical efficiency of airport operation, so it is essential to develop FOD automatic detection system suitable for domestic environment. As part of the aviation safety technology development project, the development of an automatic detection system for foreign matter in the moving area of the aircraft inside the airport is underway. In this paper, it is confirmed that EO / IR camera is used for detection of foreign objects at Taean Airfield of Hanseo University. EO camera is used during the day and IR camera is used at night.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.59-70
• /
• 2010

More than 10 different cases of airline overrun accidents happened annually home and abroad in recent years. So the government put the guidelines to protect that kinds of accidents, which is named 'Runway End Safety Area'. However, the great part of airports are far from the standards, because most of the airports have been built before the guidelines. Moreover, in many cases natural obstacles, ambiance, and local area developments obstruct the extension of the runway to meet the criteria. For these reasons, the Federal Aviation Administration (FAA) recommends that the aviation fields construct 'Aircraft Rapid Arresting System(ARAS)' at the end of the runway. Many airdromes have been constructing the system and some airports have already completed the construction. In this research, our team performed a basic study about low strength perlite concrete to provide the proper material with 'ARAS'. As a result, the unit weight of the low strength perlite concrete was $4.5{\sim}6.4kN/m^3$ and uniaxial compressive strength was measured in the range of $400{\sim}1,470kN/m^2$. In addition, we tested penetration compressive strength by using CBR tester, and we observed that the strength was increased after around 60% of penetration rate. Also, 40% of penetration rate was measured through the penetration test with dump trucks.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.64-80
• /
• 2015

In this article, we verify to influence in the management performance by the safety management system that is recommended by the ICAO for the safety management on the airside area in the airport. Also, We present a comprehensive mediator effect that the employees perceive safety culture and safety behavior. We design how participants were selected as study the employees from 4 airports on the airside areas of the Incheon International Airport, Gimpo International Airport, Jeju International Airport and Gimhae International Airport in the Korea using the simple random sampling method. The instrument for data collection was a questionnaire, and it was developed. Data analysis was to conduct structural equation modeling. Test of the hypotheses were verified to Maximum Likelihood Estimator. As a result of the analysis, safety behavior and risk management of the safety management system found out that affect management performance. Also, the employees of a high awareness about safety policy could be seen that is a high impact on management performance through a safety culture and a safety behavior. Safety behavior has significant mediator effect within the relationship between the safety management system and management performance. So, We provide guidance of the safety policies for the safety management on the airside area in the airport.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.108-119
• /
• 1999

In recent, there has been remarkable progress in the field of GPS applications. In a few years, an appreciable number of aircraft will adopt GPS as a landing guidance system because GPS is more economic, more reliable and more accurate than any other aviation systems. In this respect, we have performed several helicopter landing flight tests based on the real-time DGPS system made in SNUGL (Seoul National University GPS Laboratory). From the experimental results, we found several problems Which should be fixed to adopt DGPS as a aircraft landing guidance system. In this paper, we will introduce the problems found in tests and also suggest modifications to solve the problems. Our modifications can be classified into three parts. The first is about the attitude determination with single GPS antenna. The second deals with the cockpit display module. The display was devised to integrate the Instrument Landing System(ILS) with tunnel-the-sky using virtual reality. With the display, pilot can achieve more safe landings. The last part is the digital map. We inserted digital map into our system and put direction indicator on the map using position information from GPS. It is very useful for pilot to find airports even in bad weather. Using the newly designed DGPS landing system, we conducted flight test at Kimhae International Airport, Pusan, Korea. It was successful! Our system can also satisfy Category-I criterion for aircraft landing approach and determine attitude angle with a high level of reliability. It is supported by video materials.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.19-26
• /
• 2009

Air Traffic Management (ATM) system requires extremely high reliability for the safe and dependable operations in the airport. This paper reports a study on the reliability of the prototype ATM hardware system including the servers and local area networks. Reliability Block Diagram and Fault Tree Analysis on the prototype ATM hardware were performed.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1751-1767
• /
• 2010

The advent of private railroad corporations gave us many changes because of emphasizing on administration's effectiveness. The change has had an effect on safety management too. Most public railway corporations maintain their rolling stocks and facilities by their direct workers on the other hand, private railway corporations depend on outsourcing to cut down the cost of maintenance. But they have almost same safety management system. Therefore we try to study the difference between two type of corporations, especially workers' safety attitude and propose different safety management system depending on direct or indirect workers.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.658-661
• /
• 2014

RTCA DO-278A는 통신, 항법, 감시 및 항공 교통 관리(CNS/ATM) 시스템과 장비에 대한 비항공용(지상 및 우주) 소프트웨어의 무결성을 보장하기 위한 개발 지침을 제공한다. 안전하고 효율적인 공항운영을 위한 차세대 지상이동 관제시스템인 A-SMGCS는 DO-278A의 무결성 보장 고려사항을 준수하여 개발되어야 한다. 본 논문에서는 소프트웨어 개발 수명 주기 전체에 걸쳐 DO-278A의 소프트웨어 무결성 보장 고려사항을 반영한 A-SMGCS 개발 방법을 제안한다.

• The Journal of Information Systems
• /
• v.32 no.4
• /
• pp.51-67
• /
• 2023

Purpose While research on ESG management in airlines is ongoing, research on airports, especially regional ones, remains insufficient. This study's point of departure is the inquiry into how the local airport industry is addressing global environmental shifts and engaging in ESG management activities. Design/methodology/approach Based on previous studies, the relationship between ESG(Environmental, Social, Governance) management, safety management, reputation, and management performance was analyzed. We analyzed 578 questionnaires through structural equation modeling using AMOS 21.0 to test our hypotheses. Findings First, environmental, social, governance, and safety management have a positive effect on both reputation and business performance. Second, reputation has affected business performance. Third, reputation was affected in the order of governance management, safety management, environmental management, and social management.