• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.9-10
• /
• 2019

순천만은 순천시의 남쪽에 위치하여 여수반도와 고흥반도의 사이에 있는 만 지형 형태로 만 전체를 순천만이라고도 하나, 보통 고흥군반도와 여수반도 사이의 만을 여자만이라 하고 만내부에 위치한 여자도라는 섬의 위쪽으로 순천시의 해안하구에 형성된 지역을 순천만이라 일컫는다. 순천만은 순천시에서 유입되는 동천과 이사천 및 해룡천의 하류에 형성되어 있어서 육지부에서 유입되는 퇴적물과 유기물로 인하여 갯벌과 갈대등이 잘 형성된 습지로서 2003년 12월 31일 해양수산부 갯벌 습지보존지역으로 지정되어 관리되고 있으며, 2004년에는 동북아 두루미 보호 국제네트워크에 가입하였고, 2006년 1월 국내 연안습지로는 최초로 람사르협약에 "Suncheon Bay"로 등록되었으며, 2016년 6월에는 람사르습지로 지정된 국내외적으로 중요한 습지이다. 순천만습지에 형성되어 있는 갯벌($28.0km^2$)은 세계 5대 연안습지 중 하나로서, 넓은 사니질 갯벌과 갈대군락이 잘 발달되어 있는 생태계의 보고(寶庫)이자 소중한 생태자원으로서, 순천시에서는 순천만을 자연생태공원으로 지정하여 보호 관리하고 있으며, 각종 자연학습자료들과 영상물들을 갖춘 생태전시관과 갈대숲 탐방로, 용산전망대, 야생화 정원, 담수습지, 갈대정자, 갯벌관찰대 등 사계절 생태체험을 위한 각종 시설들을 잘 갖춰놓고 많은 관광객의 이용할 수 있도록 하고 있다. 갯벌은 바닷가의 넓은 벌판이란 뜻으로서 삼면이 바다인 우리나라는 갯벌의 전체 면적이 약 $2,500km^2$에 달하는데 여기에는 많은 종류의 다양한 생물들이 살아가고 있으며 어민들의 생계에 지대한 영향을 주고있다. 이러한 갯벌은 퇴적된 입자의 구성에 따라 펄갯벌, 모래갯벌, 혼합갯벌 등으로 구별되는데 이에 따라 갯벌 생태계를 구성하고 있는 생물들의 종류도 바뀌게 된다. 순천만갯벌과 여기에 조성되어 있는 습지환경에 따라 확인되고 있는 수산자원으로는 새꼬막, 꼬막, 눈알고둥, 갯고둥, 비툴이고둥, 돌조개, 접시조개, 새알조개, 가무락조개, 바지락, 우럭, 가재붙이, 방게, 칠게, 농게 등의 저서 생물들과 짱뚱어, 문절망둑 등의 어류가 있으며, 해조류로 우뭇가사리 등이 있고, 인근의 어민들의 어업형태는 꼬막 등 패류의 채취나 종패를 뿌려 일정기간 양성하여 수확하는 양식업, 육상부에서 폐염전 등을 활용한 전어나 새우 등을 양식하는 양식업, 수산물을 직접 손이나 간단한 도구를 이용하여 잡는 맨손 어업 형태가 주를 이루고 있는 것으로 나타나고 있다. 이와 같이 국내외적으로 중요할 뿐만 아니라 인근의 어민들의 생계에도 지대한 영향을 미치고 있는 순천만의 습지는 뻘층이 깊고, 분해성 미생물이 다양하게 서식하여 유기물 분해능력이 뛰어나며, 유기영양분이 풍부하여 우리나라에서 가장 질이 좋은 습지로 평가되고 있으나, 순천시 등 순천만 인근에 거주하고 있는 인간의 활동에 따른 간섭에 많은 영향을 받고 있으며, 이에 따라 끊임없는 생태환경이 변화하고 있어서 순천만의 효율적인 보전 및 지속가능한 이용을 위해서는 생태계에서 가장 기본적인 요소인 수 저질 환경의 지속적이고 체계적인 조사 및 관리가 필요하다. 한편, 오염물질의 70% 이상은 하천이나 강을 통해서 해역으로 유입된다고 알려져 있기 때문에 생태계의 보고(寶庫)라고 알려진 순천만의 지속적인 보존 및 관리를 위해서는 유입수계 하천의 수질현황 및 오염물질의 주요 배출원을 파악하고, 이에 대한 저감대책을 수립할 필요가 있다. 따라서 본 연구는 순천만의 수저질 특성과 여기에 유입되는 하천의 수질환경 현황 및 오염원을 파악함으로써 순천만의 보전을 위한 효율적 관리방안을 제시하는 것을 목적으로 수행되었다. 연구의 결과에 따르면, 순천만의 수질평가지수에 의한 등급(WQI)은 III등급으로 나타나고 있으며, 득량만, 광양만 등에 비해 비교적 높은 유기물 및 T-N, T-P의 농도 분포를 보이고 있는 것으로 조사되었다. 이는 순천만에 유입되는 하수종말처리장의 방류수와 도시하수가 유입되어 그대로 방류되고 있는 해룡천 및 연안에 위치한 어촌으로부터 직접 방류되고 있는 일부 정화조 유출수 등, 다양한 원인에 의한 것으로 판단되며 이들의 관리가 부실할 경우 순천만의 갯벌과 습지의 지속가능한 생태환경유지는 쉽지 않다. 따라서 이를 효율적으로 관리하기 위해서는 순천만 연안의 오염물질 방류를 총량관리로 전환하여 철저히 관리하는 것이 필요할 것으로 판단된다.

• Journal of Space Technology and Applications
• /
• v.3 no.2
• /
• pp.118-143
• /
• 2023

Space is becoming more commercialized. Despite of its delayed start-up, space activities in Korea are attracting more nation-wide supports from both investors and government. May 25, 2023, KSLV II, also called Nuri, successfully transported, and inserted seven satellites to a sun-synchronous orbit of 550 km altitude. However, Starlink has over 4,000 satellites around this altitude for its commercial activities. Hence, it is necessary for us to constantly monitor the collision risks of these satellites against resident space objects including Starlink. Here we report a quantitative research output regarding the conjunctions, particularly between the Nuri satellites and Starlink. Our calculation shows that, on average, three times everyday, the Nuri satellites encounter Starlink within 1 km distance with the probability of collision higher than 1.0E-5. A comparative study with KOMPSAT-5, also called Arirang-5, shows that its distance of closest approach distribution significantly differs from those of Nuri satellites. We also report a quantitative analysis of collision-avoiding maneuver cost of Starlink satellites and a strategy for Korea, being a delayed starter, to speed up to position itself in the space leading countries. We used the AstroOne program for analyses and compared its output with that of Socrates Plus of Celestrak. The two line element data was used for computation.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.22-33
• /
• 2019

The government has steadily revised and developed laws and systems for activating remodeling of apartments in response to the problems of aged apartments. However, despite such efforts, remodeling has yet to be activated. For many reasons, this study noted that there were no tools for reasonable profitability judgements and decision making in the preliminary stages of the remodeling project. Thus, the feasibility evaluation model was developed. Generally, the profitability judgements are made after the conceptual design. However, decisions to drive remodeling projects are made at the preliminary stage. So a feasibility evaluation model is required at the preliminary stage. Accordingly, In this study, a feasibility evaluation model was developed for determining preliminary stage profitability. Construction costs, business expenses, financial expenses, and generally sales revenue were calculated using the initial available information and remodeling variables derived through the existing cases. Through this process, we developed an algorithm that can give an overview of the return on investment. In addition, the preliminary stage feasibility evaluation model developed was applied to three cases to verify the applicability of the model. Although applied in three cases, the difference between the model's forecast and actual case values is less than 5%, which is considered highly applicable. If cases are expanded in the future, it will be a useful tool that can be used in actual work. The feasibility evaluation model developed in this study will support decision making by union members, and if the model is applied in different regions, it will be expected to help local governments to understand the size of possible remodeling projects.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.637-651
• /
• 2019

In the event of a major accident such as an explosion in a refinery or a petrochemical plant, it has caused a serious loss of life and property and has had a great impact on the insurance market. In the case of catastrophic incidents occurring in process industries such as refinery and petrochemical plants, only the proximate causes of loss have been drawn and studied from inspectors or claims adjustors responsible for claims of property insurers, incident cause investigators, and national forensic service workers. However, it has not been done well for conducting root cause analysis (RCA) and identifying the factors that contributed to the failure and establishing preventive measures before leading to chemical plant's catastrophic incidents. In this study, the criteria of warning signs on CCPS catastrophic incident waning sign self-assessment tool which was derived through the RCA method and the contribution factor analysis method using the swiss cheese model principle has been reviewed first. Secondly, in order to determine the major incident warning signs in an actual chemical plant, 614 recommendations which have been issued during last the 17 years by loss control engineers of global reinsurers were analyzed. Finally, in order to facilitate the assessment index for catastrophic incident warning signs, the criteria for the catastrophic incident warning sign index at chemical plants were grouped by type and classified into upper category and lower category. Then, a catastrophic incident warning sign index for a chemical plant was developed using the weighted values of each category derived by applying the analytic hierarchy process (pairwise comparison method) through a questionnaire answered by relevant experts of the chemical plant. It is expected that the final 'assessment index for catastrophic incident warning signs' can be utilized by the refinery and petrochemical plant's internal as well as external auditors to assess vulnerability levels related to incident warning signs, and identify the elements of incident warning signs that need to be tracked and managed to prevent the occurrence of serious incidents in the future.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Journal of The Korean Association For Science Education
• /
• v.39 no.2
• /
• pp.161-171
• /
• 2019

The purposes of this study are: 1) to verify the systems thinking factor structure of elementary school students and 2) to compare systems thinking according to their preferred subjects in order to get implications for following research. For the study, pre-tests analyze data from 732 elementary school students using the STMI (Systems Thinking Measuring Instrument) developed by Lee et al. (2013). And exploratory factor analysis was conducted to identify the factor structure of the students. Based on the results of the pre-test, the expert group council revised the STMI so that elementary school students could respond to the 5-factor structure that STMI intended. In the post-test, 503 data were analyzed by modified STMI and exploratory factor analysis was performed. The results of the study are as follows: First, in the pre-test, elementary school students responded to the STMI with a test paper consisting of two factors (personal internal factors and personal external factors). The total reliability of the instrument was .932 and the reliability of each factor was analyzed as .857 and .894. Second, for modified STMI, elementary school students responded a 4-factor instrument. Team learning, Shared Vision, and Personal Mastery were derived independent factors, and mental model and systems analysis were derived 1-factor. The total reliability of the instrument was .886 and the reliability of each factor was analyzed as .686 to .864. Finally, a comparison of systems thinking according to preferred subjects showed a significant difference between students who selected science (engineering) group and art (music and physical education). In conclusion, it was confirmed that statistically meaningful results could be obtained using STMI modified by term and sentence structure appropriate for elementary school students, and it is a necessary to study the relation of systems thinking with various student variables such as the preferred subjects.

• Journal of Korean Home Economics Education Association
• /
• v.26 no.4
• /
• pp.85-114
• /
• 2014

The main purpose of this study was to develop teaching and learning plans and a smart textbook for food and nutrition education in Home Economics focusing on 'healthy diet and meal plans' unit in "Technology home Economics" textbooks for 7th graders to evaluate the effectiveness of the instruction conducted with the smart textbook. The content of the study to achieve the purpose is as follows: First, design a smart education-based teaching and learning curriculum for food and nutrition education in Home Economics, focusing on 'healthy diet and meal plans' unit. Second, develop a smart textbook for food and nutrition education based on the teaching and learning curriculum, using a smart content authoring tool. Third, evaluate the effectiveness of the instruction after applying the curriculum in real classroom situations. The results of this study were as follows: First, teaching and learning plans and materials were developed for two units, 'issues regarding teenagers' diet' and 'implementation of a healthy and balanced diet', under 'teenagers' life'. The first unit, 'issues regarding teenagers' diet', dealt with topics such as teenagers' dietary behaviors, nutrition, and health. Learning objectives for this unit were to help students identify and evaluate their own dietary behaviors. The second unit, 'implementation of a healthy and balanced diet', encouraged students to diagnose problems with their diet and plan nutrient rich meals. The objectives for this unit were to help students implement a healthy and balanced diet by providing them with nutrition and dietary guidelines for Koreans, sample meal plans, and guidelines for developing healthy eating habits for teenagers. In order to develop a teaching and learning plans to achieve these objectives, teaching and learning materials including inquiry tasks, materials for group activities, multimedia, applications and various pop-up learning materials were developed. Second, a smart textbook using DocZoom, which was a smart content authoring tool was developed. The textbook dealt with issues regarding teenagers' diet and implementation of a healthy and balanced diet. Multimedia material used in the textbook come from the Ministry of Food and Drug Safety's food and nutrition education web sites and other sources. To develop student-oriented material, relevant video clips were added to the smart textbook to motivate students and enhance their interest in the course. Third, the outcome of this study indicated that the instruction using teaching and learning plans and learning materials with the smart textbook was effective for enhancing students' interest in Home Economics classes (t-value=-3.99, p<.001), creating enthusiasm for learning(t-value = -2.61, p<.05), encouraging self-directed and independent learning(t-value = -4.77, p<.001), and improving students' interest in food and nutrition courses(t-value = -3.83, p<.001). The students' evaluation of the instruction were as follows: the instruction using teaching and learning plans and learning materials with smart textbooks, instead of paper textbooks, helped them save time looking for learning materials; students evaluated that it was easier for them to see and understand video clips and charts. In addition, most students answered that instruction with smart textbooks were more fun and convenient, and they agreed that the courses enhanced their learning experience.

• The Journal of Korean Society for School & Community Health Education
• /
• v.9 no.2
• /
• pp.15-31
• /
• 2008

Objective: This study is a quasi-experimental study by nonequivalent control group pretest-posttest design, performed in order to identify whether the program developed on the basis of Ajzen(1988, 1991)'s theory of planned behavior (TPB) for predicting the safety behavior of students of department of dental technology affects intention toward safety behavior and general behavior. Therefore, the purpose of this study is to identify whether the safety education in laboratories in which knowledge is reinforced on the basis of the TPB theory affects safety behavior. Methodology: The theoretical framework of this study was established on the basis of the TPB by Ajzen(1988, 1991). This study was performed between May 20 and December 5, 2006, and the subjects included 101 in the experimental group and 98 in the control group, a total of 199. The experimental group was educated through six 50-minute sessions (twice a week) for three weeks. The experimental group was pretested, educated, and then asked to answer the pro-questionnaire after finishing the sixth session, but the control group was free from intervention. The research tool in this study was developed by the authors with reference to the process of tool development used in Schifter and Ajzen (1985) based on Ajzen and Fishbein(1980)'s tool development guide. Results: The data were analyzed through SPSS 14.0 version. The reliability test of attitude, subjective norm, perceived norm, intention, and behavior toward safety behavior as TPB variables was calculated of Cronbach's alpha coefficient, and general characteristics and the homogeneity test of the experimental and the control groups were analyzed through t test and $X^2$ test. According to the results of the analysis, the experiment group may be higher than the control group after the safety education in the scores of attitude, the subjective norm, the perceived norm, and the intention toward safety behavior as TPB independent variables showed no significant difference, but there was significant difference in the behavior and the knowledge. Meanwhile, according to the results of the pretest and posttest, eleven items in the experimental group and two items in the control group showed significant difference in the behaviors, and twelve in the former and four in the latter were significantly different in the knowledge. Conclusion: The safety education program developed on the basis of TPB was identified to enhance safety behavior and knowledge. Therefore, the safety education program used in this study for students of department of dental technology may be utilized as database for safety education in the department of dental technology.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.1-8
• /
• 2007

PDiabetic neuropathy is one of the most common diabetes related complications including diabetic nephropathy and retinopahty. In clinical practices, nerve conduction velocity (NCV) has been used as a standard method for diagnosing diabetic neuropathy. However, it applies maximum current of 100mA to nerves causing stress and pain to patients. In this study, as a non-invasive method, $TcpO_2$ was utilized to investigate the difference and relationship between $TcpO_2$ and $SpO_2$ of normal and diabetic neuropathy subjects. In addition, a new method of diagnosing diabetic neuropathy using $TcpO_2$ is suggested. 50 normal subjects and 50 diabetic patients with neuropathy diagnosed by NCV participated in this study. Parameters used in this study were $TcpO_2$, $TcpCO_2$, and $SpO_2$. As a result of the $TcpO_2$ measurements, statistical significances were found from $TcpO_2$ of hands and feet from normal and patients group(p<0.01). $SpO_2$ measured from index finger of normal and patient groups showed no statistical significance(p>0.05). On the other hand, $SpO_2$ measured from great toes of normal and patient groups showed statistical significance(p<0.01). Correlation coefficient between $SpO_2$ of finger and $TcpO_2$ of hand was 0.400 (p<0.01) and $SpO_2$ of toe and $TcpO_2$ of foot was 0.471(p<0.01). Both correlation values were statistically significant. Sensitivities and specificities of the $TcpO_2$ method were found to be 66 % and 92 %, respectively. If the suggested $TcpO_2$ method is used periodically, prevention and early diagnosis of diabetic neuropathy would be possible.