• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.18-20
• /
• 2004

콘덴서 뱅크는 계통의 전압 유지와 무효전력 공급을 위해 많이 사용되고 있다. 전력용 콘덴서는 주로 배전계통에 많이 사용되었으나 근래에는 송전용 계통에도 많이 투입되고 있다. 송전용 콘덴서 뱅크는 대용량이며 송전계통의 X/R비가 높기 때문에 콘덴서 뱅크 개폐시에 높은 주파수의 과도전류와 과전압과 같은 과도현상이 발생하며 이로 인해 전력계통의 신뢰도에 중요한 전력기기가 손상을 받을 수 있다. 본고에서는 154-kV 계통을 예를 들어 콘덴서 뱅크에 의해 발생하는 다음의 과도현상들과 그에 대한 대안을 검토하였다. 1) 1차 콘덴서뱅크 투입시 과도현상 2) 2차 콘덴서뱅크 투입시 과도현상 3) 단락사고시 고장전류 4)공진에 의한 과전압 과도현상해석을 위해서는 ATP(Alternative Transient Pr09ram) 프로그램을 사용하였다

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.90-97
• /
• 1991

A stepping motor can be driven with open-loop or closed-loop control. The major disadvantage of open-loop control is that it is subjected to resonance and instability in certain speed range, and that there is no way to check stalling or error in position. In this paper, a closed-loop control system consisting of a microcomputer, a hybrid stepping motor, a drive, a lead screw, and an encoder which is used as a position sensor is developed. A control program is programmed in assembly language for real time control and the versatile interface adapter(VIA) is used as the interface with the microcomputer. The experimental results of the stepping motor were eliminated on all kinds of inertia load, and maximum start stop pulse rate and maximum slewing pulse rate were also increased about twice respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1094-1103
• /
• 2008

A fuel specific detonation wave in a pipe propagates with a predictable wave velocity. This internal detonation wave speed determines the level of flexural wave excitation of pipes and the possibility of resonant response leading to a large displacement. In this paper, we present particular solutions of displacements and the resonance conditions for internally loaded pipe structures. These analytical results are compared to numerical simulations obtained using a hydrocode(multi-material blast wave analysis tool). We expect to identify potential explosion hazards in the general power industries.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.813-819
• /
• 2013

The authors have developed a test system for a hemispherical resonator gyroscope by using NI FPGA equipment. We have verified its suitability for the research of resonator gyroscopes through several tests: deriving resonance, controlling amplitudes, and estimating resonator parameters. The authors have adjusted a vibrating pattern to be aligned with the driving axis (or electromagnets). This pattern alignment is a basic and important operation of the FTR mode, which is one of operating modes for resonant gyroscopes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1170-1175
• /
• 2003

In this paper, the output power improvement of Push-Push FET DRO by adding the identical DR at the drain port as one used in the gate port, has been theoretically investigated. The investigation shows that the DR located between two microstrip lines locks the phase difference of two FET's outputs at 180 degree and improves the output power of Push-Push FET DRO. Since this effect can be used for correcting the impedance difference between two FETs output circuits and the electrical length error of the power combiner at the output circuit of Push-Push DRO, which may occur when fabricate the oscillator, the oscillator with an additional DR can be useful structure for fabricating oscillator.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.734-738
• /
• 2017

In the present study, dominant factors for temperature increase and effects of mass entering the resonance tube of the gas-dynamic igniter are investigated. Using RhoCentralFoam solver in OpenFOAM program, numerical simulation is performed for three different cases. In the results, the heating of the working fluid is found to be a result from aero-thermodynamic phenomena. Appropriate mass entering to the resonance tube is found to be an important dominant factor as well.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.166-167
• /
• 2002

광자 크리스탈은 빛의 진행을 제어할 수 있는 잠재적인 능력과 Wavelength Division Multiplexing 통신 시스템에서 광소자의 구현 가능성 때문에 활발히 연구가 진행 중이다. (1-3) 본 논문에서는 광자 크리스탈의 채널 드롭 터널링 현상을 이용하여 1x4 Demultiplexer의 구현 가능성을 고찰하였다. 광자 크리스탈을 이용해서 공진 시스템을 구성하였고, 중앙에 위치한 2개의 작은 디펙트의 크기를 조절하여 채널 드롭 현상을 관찰하였다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.110-111
• /
• 2000

여기 파워는 고체 레이저 매질 내부에 열을 발생시킨다. 매질 내부에서 발생한 열은 매질 표면을 따라 냉각이 진행되어 매질 내부에서는 불균일한 온도분포가 발생하게 된다. 레이저 매질의 굴절율은 온도에 따라 변하기 때문에 열복굴절 현상과 열렌즈 현상이 일어나 레이저 출력의 손실, 빔질의 저하를 유발하고 열적 스트레스는 매질의 손상 및 모드 동기된 극초단 펄스가 넓어지는 등의 문제를 초래한다. 선형 편광 광선을 이용하는 고체 레이저에서 열복굴절에 의해 레이저 출력이 약 30 %까지 감소하므로 레이저 공진기를 구성하는데 있어서 정량적인 열영향의 해석이 필요하다. 열복굴절에 의해 발생한 손실량은 다음과 같이 표현할 수 있다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.328-341
• /
• 2017

In the control actuator system of a launch vehicle based on thrust vectoring, the interaction between electro-mechanical position servo and inertial load are combined with the dynamic characteristics of the flexible vehicle support to generate synthetic resonance. This occurred resonance is fed back to the attitude control system and can influence stability of launch vehicle. In this study, we proposed a simulation model to analyze synthetic resonance of electro-mechanical actuation system for thrust vector control and explained the results of simulation and test using dynamic force feedback control which improves dynamic characteristics of servo actuation system by reducing synthetic resonance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.284-290
• /
• 2004

In this paper, two types of thin nim bulk acoustic resonator(TFBAR) ladder filters are desisted and fabricated to analyze the effects of on-wafer inductor integration. To suppress the overmode phenomenon a 1 $\mu\textrm{m}$ thick air-gap is fabricated under the TFBAR and aluminum nitride is used for piezoelectric material, while platinum is employed for the top and bottom electrodes. The Tx filter in a duplexer, which usually has a steeper skirt characteristics o the right side of the passband, is designed with four serial and two shunt resonators, namely, a 4/2 stage. Similarly, the Rx filter is devised with a 3/4 stage to create a mirrored image of the Tx filter passband characteristics. Fabricated on-wafer spiral inductors with underpass reveals the Q factor of 5～9 at 2 ㎓. Inductor integrated filters have approximately 10 to 12 ㏈ out-of-band rejection improvement, when compared to the original filters.