• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.261-262
• /
• 2016

고효율과 높은 전력밀도를 갖는 LLC 공진컨버터를 플라즈마 공정용 DC 전원장치로 사용하기 위해서는 공정의 특성상 출력 Filter 커패시턴스 값을 작게 설정해야 한다. 이때, 기존의 LLC 공진컨버터와 다른 동작특성을 보이게 되는데, 본 논문에서는 플라즈마 공정용 LLC 공진컨버터에서 출력 Capacitor를 고려한 LLCC 공진 컨버터의 특성 및 변화를 분석하였으며 시뮬레이션을 통해 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.216-223
• /
• 2006

The high efficiency full-bridge LLC resonant converter using a contact-less transformer Is proposed for the photovoltaic power generation system. For the series resonance with a series capacitor, the LLC resonant converter utilizes the leakage inductance and magnetizing inductance of a contact-less transformer Unlike the conventional series resonant converter operated to the continuous resonant current at above resonance frequency, the proposed converter operates to the discontinuous resonant current at the narrow frequency control range below resonance frequency. Due to the discontinuous mode resonant current, the proposed converter can be achieved the zero voltage switching (ZVS) in the primary switches and the zero current switching (ZCS) in the secondary rectification diodes without my auxiliary circuit. In this paper, the experimental results of the proposed full-bridge LLC resonant converter using a contact-less transformer are verified on the simulation based on the theoretical analysis and the 150W experimental prototype.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.12
• /
• pp.1128-1138
• /
• 2010

One of the typical problems in the precise vibration is resonance characteristics at low frequency disturbance due to a heavy mass. An electro-magnetic(EM) air spring is a kind of vibration control unit and active isolator. The EM air spring in this study aims at removing the low frequency resonance for semiconductor manufacturing. The mechanical and electronic parts in the active isolator are designed to operate under a weight of 2.5 tons. The EM spring is floated using air pressure in a pneumatic elastic chamber and actuated by EM levitation force. The actuator consists of a EM coil and a permanent magnetic plate which are installed inside of the chamber. An air mount was constructed for the experiment with a stone surface plate, 4 active air springs, 4 gap sensors, a DSP controller, and a multi-channel power amp. A PD control method and operating logic was applied to the DSP. Simulation using 1/4 model was carried out and compared with the experiments. The time duration and maximum peak at resonance frequency can be reduced sharply by the proposed system. The results show that the active system can avoid the resonance caused by the natural frequency of the passive system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.813-819
• /
• 2013

The authors have developed a test system for a hemispherical resonator gyroscope by using NI FPGA equipment. We have verified its suitability for the research of resonator gyroscopes through several tests: deriving resonance, controlling amplitudes, and estimating resonator parameters. The authors have adjusted a vibrating pattern to be aligned with the driving axis (or electromagnets). This pattern alignment is a basic and important operation of the FTR mode, which is one of operating modes for resonant gyroscopes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.328-341
• /
• 2017

In the control actuator system of a launch vehicle based on thrust vectoring, the interaction between electro-mechanical position servo and inertial load are combined with the dynamic characteristics of the flexible vehicle support to generate synthetic resonance. This occurred resonance is fed back to the attitude control system and can influence stability of launch vehicle. In this study, we proposed a simulation model to analyze synthetic resonance of electro-mechanical actuation system for thrust vector control and explained the results of simulation and test using dynamic force feedback control which improves dynamic characteristics of servo actuation system by reducing synthetic resonance.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.1
• /
• pp.29-38
• /
• 2018

In order to evaluate the performance of the floating wave power, which is an axisymmetric oscillating water column type, linearized free surface boundary condition considering the influence of PTO (power takeoff) was derived and a finite element numerical model was established. Numerical experiments were carried out by varying cylinder length, skirt length, and depth of water, which are design parameters that can change the resonance of water column in cylinder and heave resonance of the float, which is considered to affect the power generation efficiency. Finally, the basic data necessary for the optimum design of the power generation system were obtained. As a result, the efficiency of the power generation system is dominated by the heave motion resonance of the float rather than the water column resonance in the cylinder, and the resonance condition for the heave motion can be changed efficiently by attaching the skirt to the outside of the buoy.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.209-210
• /
• 2010

LLC 공진형 컨버터는 영전압 스위칭과 영전류 스위칭이 가능하여 높은 효율로 동작하고 안정적인 전원 공급이 가능하다. 본 논문은 LED 전원 공급 장치로 쓰이고 있는 플라이백 컨버터와 LLC 공진형 하프브리지 컨버터를 비교하여 LLC 공진형 컨버터의 우수성을 입증하고, 그 특성을 분석하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.50-51
• /
• 2003

본 연구에서는 레이저로 원자의 속도를 줄이고 집속하여 얻은 고밀도 저속 원자빔을 이용하여 Ramsey 신호를 얻는 원자 시계를 설계하고 제작하였다. 우선 30 Hz 수준의 Ramsey 신호 선폭을 얻기 위해 40 cm 의 Ramsey 공진기를 설계 제작하였으며 공진주파수를 측정하고, 공진주파수를 시계전이 주파수에 맞도록 튜닝(tuning) 하였다. 제작된 H-plane Ramsey 공진기를 설치할 수 있는 진공조와 정자장을 발생시키기 위한 정자장 발생장치를 설계 제작하였다. 지자장의 영향을 최소화하기 위해 자기차폐통을 설계 제작하였다. (중략)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.31-40
• /
• 2008

Recently, Contactless Power Supply(CPS) system has been broadly studied as a power supply system for Flat Panel Display(FPD) material transfer equipments. In mass production line, CPS systems on material transfer equipment are applied only in the straight sections with single operating vehicle. The formal CPS system was not adequate for curved section nor multiple operating vehicles. Therefore, this paper presents CPS system that consists of straight and curved section with multiple operation vehicles. The circuit topology of CPS system consists of full bridge configured serial-parallel resonant DC/DC converter. The control method for CPS system consists of duty control method on the primary power supply system to maintain constant resonant current. And the secondary power supply systems of multiple vehicles are self controled to maintain constant output voltage. Practically, the test result of dual vehicles on straight and curved section of material transfer equipments were satisfactory, and proved it's applicability on commercial use.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.118-119
• /
• 2019

본 논문은 유연전극의 플라즈마 반응을 위한 고효율 전원장치에 대한 연구이다. 유연전극은 저온 플라즈마 방전으로, 수 kV의 AC형태의 고전압 및 소전력 구동 사양이 요구된다. 상용전원을 사용하는 유연전극용 고전압 전원장치는 AC-DC, DC-AC로 변환이 가능한 2단 구조를 갖는다. 1단은 낮은 전력에서 높은 효율을 달성 할 수 있는 CrM(Critical Conduction Mode) PFC와 전부하 영역 소프트 스위칭을 통해 고효율 달성이 용이한 LLC 공진 컨버터를 사용하였다. 유연전극은 사양에 따라 커패시턴스가 달라진다. 따라서, 본 논문에서는 유연전극 사양에 따른 공진 주파수의 최적화를 통해서 유연전극의 플라즈마 반응 및 특성 시험을 위해 고효율 전원장치를 구성하였다. 실험을 통해서 유연전극용 고효율 전원장치를 검증하였다.