• Journal of the Korea Computer Industry Society
• /
• v.2 no.9
• /
• pp.1163-1174
• /
• 2001

A general goal of the ATM(Asynchronous Transfer Mode) network is to support connections across various networks. ABR service using EPRCA(Enhanced Proportional Rate Control Algorithm) switch controls traffics in ATM network. EPRCA switch, traffic control method uses variation of the ACR(Allowed Cell Rate) to enhance the utilization of the link bandwidth. However, in ABR(Available Bit Rate) service, different treatments are offered according to different RTTs(Round Trip Times) of connections. To improve the above unfairness, this paper presents ABR DELAY mechanism, in which three reference parameters for cell delay are defined, and reflect on the messages of RM(Resource Management) cells. To evaluate our mechanism, we compare the fairness among TCP connections between ABR DELAY mechanism and ABR RRM mechanism. And also we execute simulations on a simple ATM network model where six TCP connections and a background traffic with different RTTs share the bandwidth of a bottleneck link. The simulation results, based on TCP goodput and efficiency, clearly show that ABR DELAY mechanism improves the fairness among TCP connections.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.296-298
• /
• 1998

본 논문의 폭주적인(bursty) 트래픽을 생성하는 스트리밍에서 사용자가 요구하는 최소 품질 (Quality of Service)의 보장 및 공정한 대역폭 활용을위하여 개선된 대역폭 적응 기법을 제안한다. LAN상의 서버/클라이언트 유니캐스트 환경에서 수행된 시뮬레이션은 제안한 기법에 의한 전송율의 패턴이 네트워크의 일시적인 혼잡에 의한 영향이 적고 안정하며 대역폭을 공유하는 기타 커넥션들에게 공정하도록 대역폭을 활용함을 보여준다. 제안한 대역폭 적응 기법에 사용한 윈도우 기반 전송율 추정은 윈도우 크기에 따라 스트리밍 어플리케이션의 graceful degradation과 대역폭 활용의 trade-off을 갖고 있지만 세션 중 윈도우 크기를 상황에 따라 동적으로 변화시킴으로 요구사항을 충족하도록 응용될 수 있다.

• Journal of the KSME
• /
• v.56 no.8
• /
• pp.47-51
• /
• 2016

에너지 다소비 산업에서 에너지 절감은 생산원가 경쟁력 제고에 매우 큰 영향을 미친다고 할 수 있다. 특히, 기후변화협약을 중심으로 한 환경규제는 제조업체 경쟁력 확보에 심각한 위협으로 대두되고 있으며, 지속 가능한 성장을 위해서는 에너지 절감 및 효율적 관리가 필요 불가결한 요소로 대두되었다. 이에 이 글에서는 공정산업에서 에너지 네트워크를 구성하고 최적화 기술을 적용하여 에너지를 체계적으로 관리하고, 절감하는 방법에 대하여 논하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1237-1240
• /
• 2002

본 논문에서는 ATM과 같은 연결 지향적 고속네트워크에서, 가중치를 가진 Flow들의 대역폭 할당과 라우팅문제에 있어 공정성과 처리량에 대하여 고려해 보았다. 가중치클 고려치 않은 Flow들에 대한 최적경로설정문제에 대하여, 기존의 QoS 서비스와 Best-Effort 서비스에서 연구된 라우팅알고리즘에서 벗어나, 본 논문은 가중치를 가진 Flow들에 대하여 Soft-QoS서비스를 지원함에 있어서 공정성과 최대 처리량을 정의하고, 또한 이를 바탕으로 가중치 최소극대 대역폭 할당과 가중치 최소극대 공정라우팅 알고리즘을 제안한다. 종단간 최적경로를 설정하는데, 최소비용으로 Bottleneck-Link를 구하고 대역폭을 할당하기 위하여 그래프 상의 노드에 두 가지 색을 사용하는 그래프문제(Graph Coloring)와 최악의 경우를 감안하면서 경로를 선택하는 최소극대화 문제(Maxmin)를 결부시켜 살펴본다. 나아가 Soft-QoS 서비스의 최대값과 최소값을 고려한 가중치를 가진 Weighted-Flow들의 대역폭 할당과 경로설정에 있어, 동적인 네트워크 환경에 보다 효율적으로 접근 가능한 근사 알고리즘을 제안한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.317-319
• /
• 2018

최근 인터넷을 통한 UHD (Ultra High Definition) 스트리밍 서비스의 수요가 증가했으며 네트워크에 효율적으로 비디오 스트리밍 서비스를 제공하기 위해 HTTP 적응적 스트리밍 (HTTP Adaptive Streaming, HAS) 서비스가 등장하였다. 그러나 HTTP 적응적 스트리밍은 세그먼트의 ON-OFF 패턴으로 인해 다중 클라이언트 환경에서 공정성 (Fairness), 안정성 (Stability), 효율성 (Efficiency)을 저하시키는 문제가 있다. 본 논문에서는 다수의 HAS 클라이언트 환경에서 공정성, 안정성, 효율성을 향상시키기 위한 홈 공유기에서 인코딩 비트율 기반의 대역폭 할당 기법을 제안한다. 제안 기법은 OFF 구간을 줄이기 위해 인코딩 비트율에 맞추어 할당할 대역폭을 결정함으로써 안정적인 스트리밍을 보장한다. 실험을 통해 다중 HAS 클라이언트 환경에서 공정성, 안정성 및 효율성이 향상된 것을 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.64-71
• /
• 1995

The objective of this paper is to realize an analysis system that is capable of controlling the quality of an entire cutting process by including a 3 coordinate measuring machine in the process line. Fuzzy reasoning networks based on fuzzy associative memories has been intro- duced in the measuring process, the control limits for the control process have been obtained, and the efficiency and reliability of the system have been determined by examining the simu- lated reasoning control values.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.21-30
• /
• 2016

Recently manufacturing companies have used PLC control programs popularly for their automated production systems. Since the life cycle of production process is not so long, the change of the production lines occur frequently. Most of changes happen with modification of the position information and control process of the equipment. PLC control program is also modified based on the fundamental process. Therefore, to verify new PLC program by configuring virtual space according to real environment is needed. In this paper we show a logical modeling method, based on Timed-FSA useful for sequence control and dead-lock prevention. There is a problem wasting user's labor and time when defining a variety of states in a device. To overcome this problem, we propose an extended I-O model based on existing methods by adding a token concept of Petri Nets. Also we will show the usability of the extended I-O modeling through user study.

• The Korean Journal of Applied Statistics
• /
• v.35 no.2
• /
• pp.299-310
• /
• 2022

As interest in social network analysis increases, researchers' interest in detecting changes in social networks is also increasing. Changes in social networks appear as structural changes in the network. Therefore, detecting a change in a social network is detecting a change in the structural characteristics of the network. A local change in a social network is a change that occurs in a part of the network. It usually occurs between close neighbors. The purpose of this paper is to propose a procedure to efficiently detect local changes occurring in the network. In this paper, we divide the network into partitioned networks and monitor each partitioned network to detect local changes more efficiently. By monitoring partitioned networks, we can detect local changes more quickly and obtain information about where the changes are occurring. Simulation studies show that the proposed method is efficient when the network size is small and the amount of change is small. In addition, under a fixed overall false alarm rate, when we partition the network into smaller sizes and monitor smaller partitioned networks, it detects local changes better.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.595-602
• /
• 2018

Network-based scheduling methods can be classified into CPM method and PERT method. In the network scheduling chart, critical path can be estimated by performing the forward calculation and the backward calculation though the paths in the network chart. In PERT method, however, it is unreasonable to simply estimate the critical path by adding the sum of the activity durations in a specific path, since it does not incorporate probabilistic concept of PERT. The critical path of a PERT network can change according to the target period and deviation, and in some cases, the expected time of the critical path may not be the path with longest expected time. Based on this concept, this study proposes a technique to derive the most-likely critical path by comparing the sum of estimated time with the target time. It also proposes a method of systematically deriving all alternate paths for a network of repetitive activities. Case studies demonstrated that the most-likely critical path is not a fixed path and may vary according to the target period and standard deviation. It is expected that the proposed method of project duration forecasting will be useful in construction environment with varying target date situations.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.47-56
• /
• 2009

As contemporary society becomes information-oriented, major construction companies have recently invested in information management, but small and medium ones have not. Though the small and medium companies recognize the information management is necessary and important, they don't have an ability to possess technical expertises. The purpose of this study is to develop a Schedule Risk Control System based on blogs using IT and web technologies for construction managers in small and medium construction companies. The system makes a chance to identify risk factors and prepare for responses to settle risks happened in preconstruction phases, and enables the managers and headquarters to predict and handle schedule risks by sharing information about risks on the blogs.