• Journal of Arbitration Studies
• /
• v.13 no.2
• /
• pp.657-682
• /
• 2004

The method of finding the laws in the common law countries is significantly different from that in French civil code countries. The former usually derives the laws from the previous court decisions and applies the derived rules to the current case, called inductive, while the latter prescribes the laws beforehand and then applies the prescribed rule to the current case, called deductive. Such dichotomy in comparative legal research seems to be most recognizable and common. Accordingly, the mainstream of comparative legal research would come from comparison of common laws with civil codes. (omitted)

• Korean Journal of Comparative Education
• /
• v.22 no.4
• /
• pp.149-178
• /
• 2012

The initial purpose of Affirmative Action(AA) in the U. S. was to increase access to, and ensure the equitable distribution of, opportunities for racial minority groups in order to redress past discrimination. Over the last several decades, support for AA has grown and waned as structural, political and social currents have shifted. Most recently, AA in university admissions policy was once again tested as The University of Texas at Austin successfully defended its use of AA in admissions and now faces Supreme Court review concerning the lawsuit. Fisher v. University of Texas at Austin. The purpose of this study is to illustrate the evolution of AA in university admissions reflected on major legal cases for and against it. AA is analyzed from the integrative approach based on the historical institutionalism. l.e., influenced by structure, political dynamics, institutions and critical actors.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.265-274
• /
• 2019

The purpose of this study was to explore high school teachers' subjective perception on performance-based pay system(PBPS) for teachers using Q-methodology. This study found three types of high school teachers' subjective perception on the system. Type I is named 'the type of negative perception.' The subjects of type I emphasize the PBPS is not appropriate system for motivating teachers' educational behaviors. Type II is named 'the type of neutral perception.' The subjects of type II emphasize the PBPS is a fair job evaluation, strengthening cooperative atmosphere of educational community but the system is not an usefulness for causing educational behavior etc. Type III is named 'the type of acceptive perception.' The subjects of type III emphasize the PBPS is a good policy to reward for the work most people avoid getting into and improve culture of teaching job etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.596-601
• /
• 2020

Silicon carbide is considered a potentially useful material for high-temperature electronic devices because of its large band gap energy and p-type or n-type conduction that can be controlled by impurity doping. Accordingly, the thermoelectric properties of -SiC powder prepared by refined diatomite were investigated for high value-added applications of natural diatomite. -SiC powder was synthesized by a carbothermal reduction of the SiO₂ in refined diatomite using carbon black. An acid-treatment process was then performed to eliminate the remaining impurities (Fe, Ca, etc.). n-Type semiconductors were fabricated by sintering the pressed powder at 2000℃ for 1~5h in an N2 atmosphere. The electrical conductivity increased with increasing sintering time, which might be due to an increase in carrier concentration and improvement in grain-to-grain connectivity. The carrier compensation effect caused by the remaining acceptor impurities (Al, etc.) in the obtained -SiC had a deleterious influence on the electrical conductivity. The absolute value of the Seebeck coefficient increased with increasing sintering time, which might be due to a decrease in the stacking fault density accompanied by grain or crystallite growth. On the other hand, the power factor, which reflects the thermoelectric conversion efficiency of the present work, was slightly lower than that of the porous SiC semiconductors fabricated by conventional high-purity -SiC powder, it can be stated that the thermoelectric properties could be improved further by precise control of an acid-treatment process.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.94-99
• /
• 2010

This paper presents a charge pump architecture for correcting the current mismatch due to the PVT variation. In general, the current mismatch of the charge pump should be minimized to improve the phase noise and spur performance of the PLL. In order to correct the current mismatch of the charge pump, the current difference is detected by the replica charge pump and fed back into the main charge pump. This scheme is very simple and guarantees the high accuracy compared with the prior works. Also, it shows a good dynamic performance because the mismatch is corrected continuously. It is implemented in 0.13um CMOS process and the die area is $100{\mu}m\;{\times}\;160{\mu}m$. The voltage swing is from 0.2V to 1V at supply voltage of 1.2V. The charging and discharging currents are $100{\mu}A$, respectively and the current mismatch due to the PVT variation is less than 1%.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.119-119
• /
• 2009

인버터 DC 저항용접의 적용성 증대 : 인버터 DC 저항용접 공법이 SPOT, PROJECTON, SEAM, BUTT 등의 공정에 다양하게 적용되어 저항용접 현장에서 고효율, 친환경적 용접 환경을 만드는데 일조 하고 있다. 특히 자동차의 경량화, 충돌내성 증대, 진동 및 내구성 증대, 공간활용 극대화, 새로운 Design 개념 적용 등의 산업전반에 걸쳐 나타나는 신 Trends로 고 장력 철재의 적용 범위가 확대되고 HSS(High Strength Steel), EHSS(Extra High Strength Steel), UHSS (Ultra High strength Steel ; Hot - Formed Steel )등 다양한 철판의 SPOT 저항용접이 필요하게 되었다. 기존의 AC 단상용접의 전력 특성 상 통전 중 무 통전 시간 과 높은 PEAK 전력, 단상 대 전력 소모로 인한 전력 DROP 등의 문제로 인하여 신소재의 용접 시 매우 많은 Spatter가 발생하고, 높은 용접품질의 확보가 어려워 지므로 이를 대체하기 위한 공법으로 MFDC ( 인버터 DC 저항용접공법 )이 적용되고 있다. 인버터 DC 저항용접의 적응제어 : MFDC라는 높은 효율의 용접 전력원이 확보 됨에도 불구하고 용접현장에서는 원 자재, 도금 등의 품질 산포, 프레스 물의 가공산포, 공기압 산포, 전극 과열 및 마모 등의 요인에 의하여 저항용접 산포가 발생하고 있다. 이는 인위적인 조작이 어렵고 불규칙적이며, 어디서나 산재하고 있는 문제이다. 이를 용접전력 제어 법으로 개선하여 일정한 용접성을 확보하기 위한 노력이 적응제어 기법이다. 정 전류, 정 전력 제어는 정량 제어로 용접 물을 비롯한 용접부의 변화와는 관계없이 설정된 일정량의 전력을 공급하기만 하는데 반하여 적응제어는 적절한 용접 작업 시의 용접 물의 상태, 전극의 가압, 표면 상태 등에 따른 변화 페턴을 기억하고 이후 진행되는 용접에 대하여 정상 페턴과의 차이를 감지 이를 보상하므로 고품질의 용접성을 보장하는 제어기법이다. 따라서 다양한 용접 산포 유발 요인에 의해 용접부의 변화가 발생한다 하여도 그 변화를 감지 하고 적절한 용접전력을 공급한다면 고품질의 용접성을 확보하는데 유용한 공법이 될 수 있다. 인버터 DC 저항용접의 SPC 관리 : SPOT 용접 시 획득할 수 있는 다양한 파라메터에 대하여 모니터링 하고 이 자료를 data 화 하여 품질 관리에 응용하게 되면 양산라인에서 반복적으로 발생되는 문제점을 확인 할 수 있고 이를 통계적 방법으로 추적 개선해 나간다면 용접 불량 감소 및 생산성 향상에 도움이 되며 작업자의 공정 능력 향상 및 기업의 기술축적에도 높은 기여를 할 수 있을 것이다. 용접 적응제어와 다양한 파라메터 모니터링이 한 system에서 이루어 질 때 높은 용접성 확보와 불량률 감소, 원가절감, 생산성 향상 등의 효과가 극대화 될 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.520-529
• /
• 2019

This paper has made an empirical research on airline staff working at Incheon international airport, who perceived safety culture in their organization and delivered safety information while the staff were providing service against passengers. The purpose of this paper was to analyze the relationship among safety culture, service quality and service provider efficacy to find out which factor of safety culture had a significant effect on both service quality and service provider efficacy. Following the results from empirical research, this paper would provide administrative implications which could be applied to improve airline's service quality and to manage effectively the airline staff at field. According to research, it was found fairness culture among safety cultures had a positive and significant effect on both service quality and service provider efficacy. However, reporting/studying culture had a negative effect on them. In other words, it would decrease airline service quality and prevent active service provider's efficacy at airport if a airline management focused reporting/studying culture of safety. It is important to settle down fairness culture of safety to motivate and improve service quality.

• Journal of Korean Society of Forest Science
• /
• v.52 no.1
• /
• pp.37-49
• /
• 1981

The purpose of the study is to find out the objective method of valuation on the forest stands through the analysis of logging costs that is positively related to timber production. The two forest (Amgog, Whangryoung), located nereby, but forest type, logging and skidding conditions being slightly different, were slected to carry out the study. The objective timber stumpage value were determined by investigating the appropriate timber production costs and profits of logging operations. The main result obtained in this study are as follows: 1. The rate of logging cost in consisting of timber market price is 13.15% in the area of Amgog logging place and 19.48% in Whangryoung. 2. The rate of the other production cost excluding logging cost is 15.36% in the area of Amgog logging place and 28.85% in Whangryoung. 3. The total rate of timber production cost in consisting of the market price is more than 28.51% in the area of Amgog logging place and 48.33% in Whangryoung, 4. Though the productivity of forest land is affected by the selection of tree species, tending, treatments and effective management of forest land, the more important problem is improvement of logging condition. 5. The rate of production cost in timber price is so high that we should endeavore to improve the productivity of labour and its quality, and minimize the difference of piece work per day in accordance to the various site condition. 6. Although the profit of forest industry is related to the period of recapturing investment, it is more closely related to the working condition, risk of investment and continuous change of social investment interest. 7. If the right variables which are related to the timber market, are objectively obtained, the stumpage value of mature forests can be objectively caculated by applying straight line discounting method or compound discounting method in caculating the stump to market price.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.3-38
• /
• 2019

In 1984, Congress enacted a new measure of administrative sanctions which is a civil money penalty program for violations of Aviation Act and its implementing regulations. This civil money penalty system has been in operations in lieu of suspending or revoking certificates issued by Korean government, Ministry of Land, Infrastructure, and Transport. According to the rules of Aviation Business Act or Aviation Safety Act, where the Minister of Land, Infrastructure and Transport should order an air carrier to suspend operation because of her violation under certain rules, in which case the suspension of operation is likely to cause serious inconvenience to consumers of air transport services or to harm public interest, the Minister of the department may impose an administrative monetary penalty in lieu of the suspension of operation. In this regard, airline related civil money penalties are somewhat different from those of fair trade, which is the origin of the money penalties system in Korea. Civil money penalties in the field of fair trade are imposed on executive duty violations that undermine the value of the market economy order, and focus on reimbursement of profits due to violations and compensation for unfair spending by consumers. However, in the aviation sector, breach of duty by a business operator does not simply cause the property loss of the public, but it has a direct impact on life or property of the public. In this respect, aviation penalties are more likely to be administrative sanctions or punitive measures than refunds of unfair benefits, compared to penalties in the field of fair trade. In general, civil money penalties have been highly preferred as administrative sanctions because they are subject to investigations by administrative experts and thus, efficiency can be ensured and execution is quicker than judicial procedures. Moreover, in Korea, because punitive civil damages cannot awarded by the courts, the imposition of civil money penalties is recognized as a means of realizing social justice by recognizing the legal feelings of the people. However, civil money penalties are administrative sanctions, and in terms of effectiveness, they are similar to criminal fines, which are a form of punishment. Inadequate legislation and operation of penalties imposition may cause damage to the value of Constitution. Under the above recognition, this paper has been described for the purpose of identifying the present status of the civil money penalties imposition system and operating status in the area of air transport under the laws and regulations in Korea. Especially, this paper was focused on exploring the problem and improvement direction of Korean system through the comparative study with foreign laws and regulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.324-334
• /
• 2017

The simulators for a plant unit master control (UMC) developed by domestic or overseas researchers have been developed for operator-training purposes. UMC simulators normally constructed at the end of the plant construction, despite the UMC logics, should be simulated to pre-check many signal interfaces within the power generation systems. Because of the differences in construction schedule, it is difficult for logic designers or commissioning engineers to simulate the UMC logic during the design or commissioning stage. In this background, this paper proposes a simulation method that can be used easily by plant logic designers or operators in the MATLAB Simulink programming environment. The core of the UMC is realized with a unique simulation algorithm based on mathematical analysis and functional blocks combination. In addition, an integer-based configuration was proposed to realize the plant target value control for the equipment in the logic. With these simulation methods, functions, e.g., load distribution, high-low limitations, frequency compensation, etc. were simulated. The results showed that the plant UMC logic can be simulated in Simulink without a plant simulator. The various functions proposed in this paper can provide useful information about Simulink-based simulation design for plant logic designers or commissioning engineers during the power plant construction period.