• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.93-100
• /
• 2005

Comparative thickening and dewatering characteristics of municipal wastewater sludge were investigated in terms of separated and combined treatment of primary and secondary BNR sludge. Also, various conditioning methods such as cation polymer addition, steam and ultrasonication treatment were examined to improve dewaterability of sludge. The dewaterability was measured by using specific resistant test, wedge zone simulator and centrifuge. The result of the sludge thickening test revealed that separated thickening was better in terms of solids recovery and supernatant quality. Particularly, the thickening of primary sludge with high solids (about 3.5% TS) showed very poor solid separation. The addition of cation polymer showed better conditioning characteristic for dewatering and the optimal polymer dosage was 0.26% for primary sludge, 0.43% for secondary sludge and 0.38% for combined sludge. Contrary to the result of the thickening, the dewatering test revealed that dewatering of the combined sludge is better than that of separated sludge, representing better solids separation and filtrate quality. The polymer addition was essential to improve dewaterability in filter (belt) press type dewatering but it was inefficient for the dewatering of secondary sludge only. The centrifuge type dewatering showed better performance and the dewaterability was slightly improved when the polymer was added. Based on the results of this research a sustainable sludge treatment process, particularly in terms of the recycle water quality and solids recovery, was proposed.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.375-375
• /
• 2001

금년 7월 1일부터 개정 시행되는 품질경영촉진 및 공산품안전관리범파, 2002 년 7 월 1 일부터 시행되는 제조물책임(Product Liability； PL)법으로 인하여 제품의 안전성을 제고하기 위한 노력이 정부와 기업. 학계에서 다각도로 진행중이다. 그러나, 그 추진방향들이 아직 제각각이어서 하나의 조직적인 체계를 갖추진 못하고 있다. 그 이유는 제조물책임에 대응하기 위한 제품안전성 향상이 어느 한 분야의 활동으로는 충족시킬 수 없기 때문이지만, 기본적으로는 제품안전이 담당하여야 하는 책임의 범위가 어디까지인지 기업을 비롯한 관계자들이 명확히 이해하고 있지 못하기 때문이다. 본 연구에서는 이와 관련하여, 기존에 이미 시행착오를 겪은 선진국들의 소송사례를 중심으로 제품결함 중 어느 부분에 문제가 제기되는가를 살펴보고, 그 대응책을 제시하고자 하였다. 먼저 제조물책임법의 제정 취지와 법에서 정하고 있는 책임범위가 어디까지인지를 살펴보고, 선진국의 소송사례를 중심으로 그 적용범위를 확인하였다 또한 제조물책임에 대응하기 위한 방법이 어떻게 진행되는지를 살펴보고, 그 중 제품 안전성 (Product Safety) 을 향상시키기 위하여 신뢰성이나 품질측면에서 경영상의 어떤 노력이 경주되어야 하는가를 검토하였다. 한편, 리스크 관리상의 리스크 분석과 위험성 분석과의 관계, 위험성 분석의 기법들, 위험성 분석기법의 선정요령, 제품의 안전성을 평가하기 위하여 기존의 위험성 분석기법을 어떻게 활용할 것인가, 적용상의 문제점은 없는가 검토하였다. 마지막으로, 현재 기업들이 가장 소홀하게 대응하고 있는 표시상의 결함에 대하여 소송 및 보상사례를 살펴보고, 그에 대한 대책으로서 픽토그램, 라벨, 경고문구, 그리고 사용설명서의 작성 및 표시 방안에 대하여 대응방안을 고찰하였다. 용융이 발생될 수 있다. 따라서, 이러한 현상을 방지하기 위해서는 진공 분위기 하에서 적절한 접합 틈새를 유지할 수 있는 공정 및 장비의 개발이 필요하다.(Icing화) 문제가 발생하기 때문에 배기가스의 Icing을 방지하기 위하여 압축기 끝단에서 공기를 추출하여 배기부분에 송출할 필요성이 있는 것으로 판단되었다. 출구가스의 기체 유동속도가 매우 빠르므로 (100-l10m.sec) 이를 완화하기 위한 디퓨저의 설계가 요구된다고 판단된다. 또 연소기 후방에 물을 주입하는 경우 열교환기 및 기타 부분품에 발생할 수 있는 부식 및 열교환 효율 저하도 간과할 수 없는 문제로 파악되었다. 이러한 기술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각 1례(2.9%)였다. 14) 식도경 시행회수는 1회가 17례(54.8%), 2회가 9례(29.0%), 3회 이상이

• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.91-96
• /
• 2005

The silicon-on-insulator (SOI) wafer fabrication technique has been developed by using ion-cut process, based on proton implantation and wafer bonding techniques. It has been shown by SRIM simulation that 65keV proton implantation is required for a SOI wafer (200nm SOI, 400nm BOX) fabrication. In order to investigate the optimum proton dose and primary annealing condition for wafer splitting, the surface morphologic change has been observed such as blistering and flaking. As a result, effective dose is found to be in the $6\~9\times10^{16}\;H^+/cm^2$ range, and the annealing at $550^{\circ}C$ for 30 minutes is expected to be optimum for wafer splitting. Direct wafer bonding is performed by joining two wafers together after creating hydrophilic surfaces by a modified RCA cleaning, and IR inspection is followed to ensure a void free bonding. The wafer splitting was accomplished by annealing at the predetermined optimum condition, and high temperature annealing was then performed at $1,100^{\circ}C$ for 60 minutes to stabilize the bonding interface. TEM observation revealed no detectable defect at the SOI structure, and the interface trap charge density at the upper interface of the BOX was measured to be low enough to keep 'thermal' quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.134-138
• /
• 2013

Benzo[a]pyrene, a polycyclic aromatic hydrocarbon (PAH) whose metabolites are mutagenic and highly carcinogenic, is listed as a Group 1 carcinogen by the IARC. In this study, Arabica and Robusta green coffee beans were roasted under controlled conditions and the formation of benzo[a]pyrene during the roasting process was monitored. The concentration of benzo[a]pyrene in ground coffee and brewed coffee were determined by a HPLC-fluorescence detector. The limit of detection (LOD) and limit of quantitation (LOQ) of benzo(a)pyrene were 0.03 and $0.09{\mu}g/kg$, respectively. Benzo[a]pyrene was only detected in the dark roast of ground coffee, with a concentration ranging from $0.147{\sim}0.757{\mu}g/kg$. The content of benzo[a]pyrene in Ethiopia Mocha Harrar G4 is the highest ($0.757{\mu}g/kg$).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.1
• /
• pp.29-36
• /
• 2013

So many researchers have been interested in key success factors of technological start-ups. However, previous studies have not focussed on Concreteness of technological capabilities at the growth stages and industry in technological start-ups. The purpose of this study is to investigate the Concreteness of technological capabilities that have influence on performance of technological start-ups. Empirical data was collected from 342 firms in BI in Korea. It used the questionnaire method for the CEO, It is executed the Regression analysis to test hypotheses of influencing effects. Results of the hypothesis testing are summarized as follows: First, It was found that technological capabilities had statistically significant influence on firm performance. But the property based resources had lower significant influence. Second, This research found that the knowledge based resources had higher significant influence on technological start-ups performance at IT industry. Third, The knowledge based resources had higher significant influence on performance at growth stages. In conclusion, technological capabilities were verified as important firm resources of technology-based start-ups for firm performance. But the Concreteness of technological capabilities was significant differences by growth-stage of firms.

• Composites Research
• /
• v.33 no.5
• /
• pp.235-240
• /
• 2020

In this study, in order to improve the impact resistance of the B₄C tile-inserted B₄C_p/Al7075 hybrid composite, a control method of the B₄C/Al7075 interface was developed and the characteristics of the controlled interface were analyzed. B₂O₃, Ni, and Si were coated on the B₄C tile surface using additional thermal oxidation, electroless plating, and plasma spraying. The coated B₄C tile is inserted into the B₄C_p/Al7075 composite material using the liquid pressurization method. Interfacial energy, bonding strength, and impact resistance were measured to analyze the effect of the coating. All coatings enhanced interfacial energy, bonding strength, and impact resistance, and in particular, it was confirmed that the impact resistance increased by 86.8% when B₂O₃ coating was used. This study is significant in developing and analyzing a core surface treatment method that improves the performance of B₄C/Al series composites, which are attracting attention as next-generation lightweight amour and bulletproof materials.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.63-74
• /
• 1994

The ultrathin oxide films less than 100$\AA$ were grown by thermal oxidation in $N_2O$ ambient to improve the controllability of thickness, thickness uniformity, process reproducibility and their electrical properties. Oxidation rate was reduced significantly at very thin region due to the formation of oxynitride layer in $N_2O$ ambient and moreover nitridation of the oxide layer was simultaneously accompanied during growth. The nitrogen incorporation in the grown oxide layer was characterized with the wet chemical etch-rate and ESCA analysis of the grown oxide layer. All the oxides thin films grown in $N_2O$, pure and dilute $O_2$ ambients show Fowler-Nordheim electrical conduction. The electrical characteristics of thin oxide films grown in $N_2O$ such as leakage current, electrical breakdown, interface trap density generation due to the injected electron and reliability were better than those in pure or dilute ambient. These improved properties can be explained by the fact that the weak Si-0 bond is reduced by stress relaxation during oxidation and replacement by strong Si-N bond, and thus the trap sites are reduced.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.541-546
• /
• 2010

Wild-garlic (Allium victorialis L.) is a perennial plant found in worldwide and has been considered as a favorite vegetable due to its particular smell and taste. However, the study of biological activity of wild-garlic and the development of processed food are in rudimentary. In this study, we evaluated several biological activities, including antioxidant, antimicrobial, and inhibitory activities against human thrombin, $\alpha$-amylase and $\alpha$-glucosidase, of Ulrung wild-garlic. Analysis of the composition showed that Ulrung wild-garlic is nutritive although it is perishable. The color of fresh juice was stably maintained during 10 days-storage at $4^{\circ}C$, but rapidly discolored by heat treatment at $70^{\circ}C$ for 1 h. During heat treatment, the contents of total sugar and total polyphenol were decreased to 75% and 50%, respectively, and acidity was increased from 0.069% to 0.111%. In a while, the brix, reducing sugar, and total flavonoids showed minor changes. The fresh juice showed strong DPPH scavenging activity, reducing power and antibacterial and antifungal activity, but the heat-treated juice lost the antioxidant and antimicrobial activities. The inhibitory activities against human thrombin and $\alpha$-amylase and $\alpha$-glucosidase was negligible in both fresh juice and heat-treated juice. These results suggested that the antioxidant and antimicrobial components in wild-garlic are heat-liable and volatile. Based on our results, we propose non-heat treatment products for processed wild-garlic, for example, fresh juice-added beverage or fermented liquors using wild-garlic.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.652-659
• /
• 1997

For the effective utilization of the fish bone waste from seafood industry, the physical properties of the isolated hydroxyapatite from tuna bon have been investigated. On X-ray measurements, the chemical formula and phase of the bone calcined by various temperature were detected as $Ca_{10}\;(PO_4)_6\;(OH)_2$, and hydroxyapatite, respectively. It was shown that the chemical properties of apatite separated from tuna bone were controlled by Ca/P ratio. The mean agglomerate particle diameter was changed as a function of temperature. However, the particle shape has a geometrically non-regular types. These trends are consistent with SEM images. The composition of the glass-ceramic batch by calcined tuna bone was not perfectly agreed with the suggested data, but the partially substituted composition possibly shows the application of it as a bioceramic material.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.2
• /
• pp.45-55
• /
• 2020

In terms of environmental justice, urban parks play a pivotal role in imperative amenities allowing for physical activity. The reasonable distribution of urban park services must be considered in terms of community demand and the context of the park. The purpose of this study is to analyze the inequity of qualitative park service according to the socioeconomic status(SES) in Daegu. The qualitative service was assessed for 82 neighborhood and walking-distance parks by utilizing the NGST(Neighborhood Green Space Tool). The inequity was analyzed by SES variables(ratio of basic living recipients, ratio of single-parent families, average housing sales, dilapidated dwelling ratio, and park area per capita). The features of the qualitative equity in Daegu is as follows. First, urban park planning in Daegu is in parallel with the development of residential areas rather than the local policy. The development pattern of parks stretching from center of the city to outskirts clearly dissociates the city based on socioeconomic status. The parks in the center are relatively old and poorly managed. Second, overall neighborhood parks lacked recreational facilities. The facilities are significantly influenced by the housing values around them. The lower the recreation facility score, the higher the floor gradient of the urban parks constraining physical activities. Third, the quantitative supply of parks has nothing to do with the quality of the urban parks. Green space distribution is highly dependent on natural park areas, so the park area per capita cannot be a standard for assessing qualitative equity.