• The Korean Society of Law and Medicine
• /
• v.20 no.2
• /
• pp.173-206
• /
• 2019

This research examines the characteristic of regulation on Japanese clinical research in recent years. First, Japan has had a severe punishment policy on research misconduct like Korea, but, in recent days, Japan has changed the direction of research ethics policy from restriction to research publicness securement by educational training, in addition, Act of Clinical Research, effected April 2018, has recruited excellent researchers, and then integrated clinical research and medicine clinical trial through raising transparency of funding and integrating ethics screening by mandating announcement on funding information of clinical research. Second, Japan has integrated and organized ethics guideline from dual system that consists of ethics guideline on dynamic research(here after, referred to as 「dynamic guideline」) and ethics guideline on clinical research(here after, referred to as 「clinical guideline」) to ethics guideline on medical research aimed at human(here after, referred to as 「integrated guideline」), thus, it complements repetition and deficit of ethics guideline needed in clinical research and dynamic research, and it has risk evaluation system for protecting human subjects, and also it clarifies the concept of 「invasiveness」, a preliminary consideration of evaluation. 「Evaluation issue of risk and profit」, common contents of international regulation related clinical research, is the method to check whether the research is designed appropriately or not, this is the method for Institutional Review Board to decide whether the risk on human subjects could be justified, and also this is the important standard for future human subjects to participate in clinical trial. Therefore, it is meaningful to define 「invasiveness」 concept, a preliminary consideration of risk evaluation for human subjects. This research examines Japanese clinical trial focusing on change of awareness on prevention of research misconduct, efficiency improvement of research through research screening and integration of human subjects, and clarification and extension of range of 「invasiveness」 concept, a preliminary of risk evaluation to protect human subjects.

• International Area Studies Review
• /
• v.20 no.2
• /
• pp.85-111
• /
• 2016

Global semiconductor companies is investing enormous capital worldwide. And direct investment in China is increasing greatly these days, Especially, global semiconductor companies are setting up a factory in China due to expanding market rather than utilizing low labor cost. Therefore, this study is trying to analyze the background and process of direct investment from global Korean and Taiwanese semiconductor companies in China. Firstly, In 1996, Samsung semiconductor established a back end process factory in Suzhou. And in 2014, Samsung semiconductor set up a front and back end factory in Xian. Secondly, In 2006, SK Hynix built a front and back end factory in Wuxi. and SK Hynix set up a back end factory named Hitech semiconductor with Chinese company in 2009. Later in 2015, SK Hynix established a back end factory in Chongqing. Thirdly, In 2004, TSMC started to operate a factory in Shanghai, and in 2018, TSMC is going to establish a factory in Nanjing. Lastly, UMC bought a stock to produce product in Chinese local company named HJT, and at the end of 2016, UMC is going to finish building a factory in Xiamen. As a result, it was proved that most companies hoped to expand the chinese market by setting up a factory in china. In addition, Samsung expected to avoid a risk by setting up a factory in china, and SK Hynix wanted to avoid a countervailing duty by setting up a factory in china. Based on the result of this study, this study indicates some implications for other semiconductor companies which are very helpful for their future foreign direct investment.

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.84-91
• /
• 2017

Recent years have witnessed the increased usage of flammable metals, such as aluminum or magnesium, in wide range of high-tech industries. These metals are indispensable for the improvement of physical properties of materials as well as the design capability of the final product. During the process, unwanted metal dusts could be released to the environment. This can lead to an occupational health and safety issues. Due to their flammable nature, more serious problem of an explosion can happen in extreme cases. The explosion is the combustion of tiny solid particles and vapor mixture, caused by pyrolysis. This complex composition makes engineering analysis more difficult, compared to simple gas explosions or vapor cloud combustions. The study was conducted to assess this light metal dust explosion in an effort to provide the bases for a risk assessment. Dust explosion characteristics of each material was carefully evaluated and an appropriate analysis tool was developed. A comprehensive database was also constructed and utilized for the calibration of the developed response model and the verification for its accuracy. Subsequently, guidelines were provided to prevent dust explosions that could occur in top-notch industrial processes.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.375-375
• /
• 2001

금년 7월 1일부터 개정 시행되는 품질경영촉진 및 공산품안전관리범파, 2002 년 7 월 1 일부터 시행되는 제조물책임(Product Liability； PL)법으로 인하여 제품의 안전성을 제고하기 위한 노력이 정부와 기업. 학계에서 다각도로 진행중이다. 그러나, 그 추진방향들이 아직 제각각이어서 하나의 조직적인 체계를 갖추진 못하고 있다. 그 이유는 제조물책임에 대응하기 위한 제품안전성 향상이 어느 한 분야의 활동으로는 충족시킬 수 없기 때문이지만, 기본적으로는 제품안전이 담당하여야 하는 책임의 범위가 어디까지인지 기업을 비롯한 관계자들이 명확히 이해하고 있지 못하기 때문이다. 본 연구에서는 이와 관련하여, 기존에 이미 시행착오를 겪은 선진국들의 소송사례를 중심으로 제품결함 중 어느 부분에 문제가 제기되는가를 살펴보고, 그 대응책을 제시하고자 하였다. 먼저 제조물책임법의 제정 취지와 법에서 정하고 있는 책임범위가 어디까지인지를 살펴보고, 선진국의 소송사례를 중심으로 그 적용범위를 확인하였다 또한 제조물책임에 대응하기 위한 방법이 어떻게 진행되는지를 살펴보고, 그 중 제품 안전성 (Product Safety) 을 향상시키기 위하여 신뢰성이나 품질측면에서 경영상의 어떤 노력이 경주되어야 하는가를 검토하였다. 한편, 리스크 관리상의 리스크 분석과 위험성 분석과의 관계, 위험성 분석의 기법들, 위험성 분석기법의 선정요령, 제품의 안전성을 평가하기 위하여 기존의 위험성 분석기법을 어떻게 활용할 것인가, 적용상의 문제점은 없는가 검토하였다. 마지막으로, 현재 기업들이 가장 소홀하게 대응하고 있는 표시상의 결함에 대하여 소송 및 보상사례를 살펴보고, 그에 대한 대책으로서 픽토그램, 라벨, 경고문구, 그리고 사용설명서의 작성 및 표시 방안에 대하여 대응방안을 고찰하였다. 용융이 발생될 수 있다. 따라서, 이러한 현상을 방지하기 위해서는 진공 분위기 하에서 적절한 접합 틈새를 유지할 수 있는 공정 및 장비의 개발이 필요하다.(Icing화) 문제가 발생하기 때문에 배기가스의 Icing을 방지하기 위하여 압축기 끝단에서 공기를 추출하여 배기부분에 송출할 필요성이 있는 것으로 판단되었다. 출구가스의 기체 유동속도가 매우 빠르므로 (100-l10m.sec) 이를 완화하기 위한 디퓨저의 설계가 요구된다고 판단된다. 또 연소기 후방에 물을 주입하는 경우 열교환기 및 기타 부분품에 발생할 수 있는 부식 및 열교환 효율 저하도 간과할 수 없는 문제로 파악되었다. 이러한 기술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각 1례(2.9%)였다. 14) 식도경 시행회수는 1회가 17례(54.8%), 2회가 9례(29.0%), 3회 이상이

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.81-88
• /
• 2022

This study is to investigate the perception of domestic appraisers about the possibility of using artificial intelligence (AI) and related risks from the use of AI in the appraisal industry. We conducted a mobile survey of evaluators from February 10 to 18, 2022. We collected survey data from 193 respondents. Frequency analysis and multiple response analysis were performed for basic analysis. When AI is used in the appraisal industry, factor analysis was used to analyze various types of risks. Although appraisers have a positive perception of AI introduction in the appraisal industry, they considered collateral, consulting, and taxation, mainly in areas where AI is likely to be used and replaced, mainly negative effects related to job losses and job replacement. They were more aware of the alternative risks caused by AI in the field of human labor. I was very aware of responsibilities, privacy and security, and the risk of technical errors. However, fairness, transparency, and reliability risks were generally perceived as low risk issues. Existing studies have mainly studied analysis methods that apply AI to mass evaluation models, but this study focused on the use and risk of AI. Understanding industry experts' perceptions of AI utilization will help minimize potential risks when AI is introduced on a large scale.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.722-729
• /
• 2010

Over the last decades, much consideration has been given to microbiological and chemical risks, especially when wastewater was reclaimed as water resources for urban water, irrigation water and recreational water etc. We investigated the performance of UV-based processes such as UV and UV/$H_2O_2$ for both the removal of pharmaceuticals and personal care products (PPCPs) as an emerging chemical and the inactivation of pathogen with bench-scale experimental study. 38 kinds of PPCPs including antibiotics and analgesics were detected from secondary effluent used as tested water. Bench-scale experimental study showed that UV process would require considerable UV dose for the effective PPCPs removal. Contrarily, PPCPs removal efficiency significantly improved by the combination of $H_2O_2$ with UV even at a lower UV dose and, moreover, their removal efficiency increased with the increased initial $H_2O_2$ concentration. Besides naproxen (>89%), concentrations of all the investigated PPCPs decreased by more than 90% of their initial concentrations under $923\;mJ/cm^3$ of UV dose and 6.2 mg/L of $H_2O_2$. Previous studies showed that this operational condition could get 4~5 log inactivation for Total coliform, indicating that UV/$H_2O_2$ process will be appropriate to comply with the criteria of California Title 22 for Total coliform.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.91-101
• /
• 2009

The factors of uncertainty such as work delay could cause many problems, for example, increase of construction cost and terms of work, and the deterioration of quality. Because of these, the uncertainty risk is regarded as an important management factor to obtain the success of construction project. So, the systematic management plan about the uncertainty factors is needed because it plays an important role in the completion of entire project. And also analysis of some factors which can cause the work delay can be one way of improving construction project's certainty and making it competitive. In this reason, we have to make an effort to set a priority based on analysis of quantitatively numerical value about work delay factors to manage them effectively. Thus, this study aims to suggest the basic data for the effective management and prevention of work delay in steel-frame work which is progressive actively now, along with increasing of demand of high-rise buildings by analyzing each reasons of work delay factors and also by suggesting important management factors that are coded according to each construction work using FMEA method which could give a data about the importance of work delay factors through quantitatively numerical value.

• The Korean Journal of Financial Management
• /
• v.27 no.2
• /
• pp.63-84
• /
• 2010

We investigate whether FX hedging materially increases firm value by testing the valuation effect of Foreign Exchange Risk Insurance in Korea, using our sample of 84 listed firms with 617 observations between 2000 and 2008, Employing Tobin's Q as a proxy of firm value and foreign exchange risk insurance as a proxy of hedging instrument, we find a positive relation between firm value and the use of foreign exchange risk insurance. The hedging premium is statistically significant and is on average 7.4% of sample firm value. We also find our empirical results consistent with the preceding evidence that firm uses the hedging instrument in order to alleviate economic frictions and then hedging causes an increase in firm value.

• The KIPS Transactions:PartA
• /
• v.15A no.1
• /
• pp.61-68
• /
• 2008

In this paper, we propose the VLSI design of Multi-Format Video Decoder (MFD) to support video codec standards such as MPEG-2, MPEG-4, H.264 and VC-1. The target of the proposed MFD is the Full HD (High Definition) video processing needed for the high-end D-TV SoC (System-on-Chip). The size of the design is reduced by sharing the common large-size resources such as the RISC processor and the on-chip memory among the different codecs. In addition, a detachable architecture is introduced in order to easily add or remove the codecs. The detachable architecture preserves the stability of the previously designed and verified codecs. The size of the design is about 2.4 M gates and the operating clock frequency is 225MHz in the Samsung 65nm process. The proposed MFD supports more than Full-HD (1080p@30fps) video decoding, and the largest number of video codec standards known so far.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.269-280
• /
• 2022

With property values of buildings rising, interior construction works are also increasing globally. Interior construction technology has developed into building information modeling(BIM) that can estimate and integrate material quantities. Two-dimensional(2D) drawings and three-dimensional (3D) modeling are becoming a trend owing to the demanding on-site cost and process. 2D drawings and 3D modeling have both advantages and disadvantages that give rise to defects during interior construction work. The field problems, 2D drawings, 3D modeling, and preliminary risk factors of interior construction work were analyzed to identify real problems. Based on the problem analysis, various problems were derived, such as (1) communication with purchasers, (2) communication with workers, and (3) comprehension of the drawings. In this study, a checklist for quality improvement of interior construction was proposed to address the aforementioned issues.