• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.59-66
• /
• 2006

Acoustic cavity as a stabilization device to control high-frequency combustion instabilities in liquid rocket engine is adopted and its damping capacity is verified in atmospheric temperature. First, harmful resonant frequency in a modeling chamber can be damped effectively by the installation of properly-tuned acoustic cavity. Besides, geometric effects of acoustic cavity on damping characteristics are analyzed and compared quantitatively. Satisfactory agreements have been achieved with linear acoustic analysis and experimental approach. Results show that the acoustic cavity of the largest orifice area or the shortest orifice length was the most effective in acoustic damping of the harmful resonant frequency. Finally, it is proved that an optimal design process is indispensable for the effective control of combustion instabilities.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.9
• /
• pp.781-786
• /
• 2015

An aeroelastic stability can be degraded due to an aeroelastic modeling error and a structural uncertainty. Therefore it is necessary to predict the aeroelastic stability boundary considering an aeroelastic modeling error and a structural uncertainty. Robust aeroelastic analysis was proposed to predict the aeroelastic stability boundary considering these error and uncertainty. In the present study, the robust aeroelastic modeling and analysis were performed by using the ${\mu}$ analysis technique and the aeroelastic model of the control fin with modal approach and MSA. The computer program for the robust aeroelastic analysis was developed and verified by comparing its results with those of conventional aeroelastic analysis methods.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.59-64
• /
• 2011

Clogging in drainage pipe is one of the important problems, so it needs a remedy urgently. Recently, scale in drainage pipe is removed by water jet cleaning and other treatment. But these treatments need much cost and regular management. The principal component of scale in drainage pipe is $CaCO_{3}$. It was observed the setting of $CaCO_{3}$ by some kind of analysis such as SEM, XRD, visual and weight measuring analysis to solve these problems and prevent setting formation in drainage pipe. As a result, in case of magnetic, particle shape of $CaCO_{3}$ is changed Aragonite from Calcite. Also in case of Quantum Stick, the amount of scale is reduced by expert inspector's result. As a whole, Magnetic treatment and Quantum Stick have the effect for protecting of scale precipitation.

• Journal of the Daesoon Academy of Sciences
• /
• v.49
• /
• pp.331-364
• /
• 2024

This article examines the religious implications of the concept of public (gong, 公) and private (sa, 私) affairs as presented in Daesoon Thought. To achieve this, the article first explores the three main meanings of gong and sa in the East Asian tradition: ①gong as ruling powers or institutions and sa as the personal sphere, ②gong as communal interests or opinions and sa as individual interests or opinions, and ③gong as fair ethical principles and sa as unfair, immoral intentions. The analysis reveals that Daesoon Thought strongly emphasizes the conceptualization of gong and sa in terms of ethical principles and immoral aspects. The practice of distinguishing between gong and sa is seen as an important way to open up the new order of life, called the Earthly Paradise of Later World, that Daesoon Jinrihoe aims to achieve. Daesoon Thought's theory on public versus private, which restrains the private (sa, 私) and prioritizes the public (gong, 公), provides a solid framework for self-transformation through moral practice, enabling participation in the Earthly Paradise of Later World envisioned by Jeungsan, the originator of Daesoon Jinrihoe's teachings.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.1-7
• /
• 2007

Slug/bail tests were conducted in sand layer (sbt-1 well), silty sand layer (sbt-2 well), and mixed sand and silty sand layer (sbt-3 well). Hydraulic conductivity and specific storage coefficient were estimated through slug/bail tests. Pore volumes of groundwater level drawdown zone for bail test were estimated by using hydraulic conductivity and specific storage coefficient. KGS model was most suitable interpretation method of slug/bail tests. Average hydraulic conductivity for slug/bail tests were estimated to be $6.65{\times}10^{-5}$ m/sec in sbt-1 well, $6.33{\times}10^{-6}$ m/sec in sbt-2 well, and $3.72{\times}10^{-5}$ m/sec in sbt-3 well. Average specific storage coefficient for slug/bail tests were estimated to be 0.0225 in sbt-1 well, 0.0177 in sbt-2 well, and 0.0259 in sbt-3 well. Dimensionless time and dimensionless wellbore storage were estimated by use of transmissivity, storativity, test time, and specification of test wells. And, dimensionless drawdown were selected by parameter ${\alpha}\;and\;{\beta}$ parameter from Cooper et al. (1967). Radius of influence were estimated by estimated dimensionless time, dimensionless wellbore storage, and dimensionless drawdown. The average radius of influnce for slug/bail tests were estimated to be 1.377 m in sbt-1 well, 1.253 m in sbt-2 well, and 1.558 m in sbt-3 well. Pore volume at groundwater level drawdown zone by dummy withdrawal for bail tests were estimated to be $145,636cm^3$ in sbt-1 well, $71,561cm^3$ in sbt-2 well, and $100,418cm^3$ in sbt-3 well. Pore volume excepted well volume at groundwater level drawdown zone by dummy withdrawal for bail tests were estimated to be $145,410cm^3$ in sbt-1 well, $71,353cm^3$ in sbt-2 well, and $100,192cm^3$ in sbt-3 well.

• Journal of Korea Water Resources Association
• /
• v.43 no.5
• /
• pp.433-443
• /
• 2010

Drop structures that span the entire width of channels are installed to alleviate channel grades and have been constructed widely in Korean rivers. Aprons are normally installed and integrated with drop structures and bed protections are added on the downstream part of aprons to protect both drop structures and aprons. Scour occurring on aprons is reported to provide various habitats such as ripples and pools in natural rivers. This study focuses on the scour characteristics on an apron integrated with a drop structure and the subsidence of a riprap protection. The scour depth on the downstream part of the drop structure is found to increase with the increase of unit discharge; however, to decrease as the tail water depth gets deeper. Based on the experimental measurements, the subsidence of the riprap scour protection is calculated with respect to the thickness of riprap. Finally, the dimensionless empirical equation to quantify the subsidence of the riprap scour protection without filters at downstream of the vertical drop is suggested.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.495-504
• /
• 2021

Energy Harvesting is a technology that can convert wasted energy such as vibration, heat, light, electromagnetic energy, etc. into usable electrical energy. Among them, vibration-based piezoelectric energy harvesting (PEH) has high energy conversion efficiency with a small volume; thus, it is expected to be used in various autonomous powering devices, such as implantable medical devices, wearable devices, and energy harvesting from road or automobiles. In this study, wasted vibration energy in an automobile is converted into electrical energy by high-power piezoelectric materials, and the generated electrical energy is found to be an auxiliary power source for the operation of wireless sensor nodes, LEDs, etc. inside an automobile. In order to properly install the PEH in an automobile, vibration characteristics includes frequency and amplitude at several positions in the automobile is monitored initially and the cantilever structured PEH was designed accordingly. The harvesting properties of fabricated PEH is characterized and installed into the engine part of the automobile, where the vibration amplitude is stable and strong. The feasibility of PEH is confirmed by operating electric components (LEDs) that can be used in practice.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.975-980
• /
• 2020

Cervical neural foraminal stenosis is a very common spinal disease that affects a relatively large number of people of all ages. However, since imaging methods that quantitatively provide neural foraminal stenosis are lacking, this study attempts to present quantitative measurement results by reconstructing 3D computed tomography images. Using a 3D reconstruction software, the surrounding bones were removed, including the spinous process, transverse process, and lamina of the cervical spine so that the neural foramen were well observed. Using Image J, a region of interest including the neural foramen area of the 3D image was set, and the number of pixels of the neural foramen area was measured. The neural foramen area was calculated by multiplying the number of measured pixels by the pixel size. In order to measure the widest area of the neural foramen, it was measured between 40-50 degrees in the opposite direction and 15-20 degrees toward the head. The measured cervical neural foramen area showed consistent measurement values. The largest measured area of the right neural foramen C5-6 was 12.21 ㎟, and after 2 years, the area was measured to be 9.95 ㎟, indicating that 18% stenosis had progressed. Since 3D reconstruction using axial CT scan images, no additional radiation exposure is required, and the area of stenosis can be objectively presented. In addition, it is good to explain to patients with neural stenosis while viewing 3D images, and it is considered a good method to be used in the evaluation of the progression of stenosis and post-operative evaluation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.229-232
• /
• 2002

대전 북부 화강암지역 내 심도 500m까지 굴착한 시추공에 다중패커 시스템(Multi-packer system)을 이용하여 구간별로 지하수 시료채취를 수행하고, 시추공 지하수에 대한 지화학 특성 연구를 수행하였다. 다중패커 시스템에 의해 구간별로 격리된 시추공 지하수의 수리화학자료는 구간별로 특징적인 화학조성을 나타낸다 다중패커 시스탬이 설치된 직후 채취한 지하수 시료와 일정시간이 경과한 후 채취한 시료간에는 시기별로 화학특성의 차이를 보이는데 이는 시추당시 사용된 시추수의 영향 때문인 것으로 사료된다. 또한 심도 115m를 기준으로 상부구간과 하부구간에 지화학 특성에서 큰 차이를 보이고 있는데 이는 시추공 굴착당시 단열대의 붕괴로 인해 시공된 그라우팅의 영향 때문이다. 이상치를 보이는 115m 구간을 제외하고, 시추공 지하수의 지화학 자료는 구간별로 명확히 구별되어 화강암 지역에서 지하수의 유동은 단열분포특성에 영향을 받음이 확인되었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.303-306
• /
• 2010

DMB, IPTV 등의 미디어에서 방송 서비스를 위해 다수의 기송출된 지상파 방송 프로그램을 재가공하여 활용한다. 이를 위한 작업에서 방송 프로그램 앞뒤에 삽입되어 있던 지상파 방송사의 광고를 각 서비스 사업자의 계약 광고로 대체하므로, 광고를 분리하여 방송 프로그램의 본 내용만 인코딩하는 과정이 필요하다. 본 논문에서는 이와 같은 재가공 작업을 위해 방송프로그램 스트림에서 본 내용의 시작 종료점을 검출하는 방법을 제안한다. 이는 디지털 방송 프로그램 스트림으로부터 영상의 특징과 자막 데이터를 추출, 분석하여 판별하는 방법으로, 개별 광고의 특징 데이터를 이용하지 않고 처리한다. 따라서 방송 콘텐츠를 재가공하기 위한 인코딩 시스템에, 모든 광고들을 미리 분석하고 특징 데이터를 추출하는 전처리 과정없이 적용이 가능하다.