• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.363-369
• /
• 2008

Change is inevitable and is a reality of construction projects. Change adjustment includes the cost associated with materials, labor, etc. However, the actions of a contractor can cause a loss of productivity and furthermore can result in disruption of the whole project because of a cumulative or ripple effect. Because of its complicated nature, it becomes a complex issue to determine the cumulative impact (ripple effect) caused by single or multiple change orders. Furthermore, owners and contractors do not always agree on the adjusted contract price for the cumulative impact of the changes. What is needed is a reliable method to identify and quantify the loss of productivity caused by cumulative impact of change orders. This study survey the change orders data in domestic area for public construction and analyze to quantify change order impact. This study developed concepts of "%CO", "%Delta", "%T" to capture change order effect on project and search the relationships between them. Finally, this study find strong relationship between change order and loss.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.394-397
• /
• 2004

Working-day calculation with weather factors of construction-site has estimated wethout proper data. They usually estimate it with their own experience and intuition. It causes not only economic loss to time-adjustment but also conflict with each participants. Moreover, weather estimation becomes worse than before, due to tendency of recently weather change. So, in this paper we present optimal estimation method as assessment by period of the arithmetical mean methods. For that, we analyse characteristic of the regions and weather change of temperature and rainfall which affects time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12A
• /
• pp.1759-1765
• /
• 2000

공기 갭을 갖는 일축성 기판위에 마이크로 패치 안테나의 공진 주파수가 full-wave approach와 모멘트 계산법을 이용하여 연구되었다. 일축성 매질내의 구성관계식을 통하여 제안된 구조에서의 파수영역 다이애딕 그린 함수를 유도하였으며 이 결과로부터 전계 적분 방정식을 수식화하였다. 갤러킨 모멘트법을 사용하여 전계 적분 방정식을 이산화 하였으며 기저함수의 선택은 수치 해석적 수렴을 고려하여 패치 위의 실제 전류밀도와 가장 유사한 형태인 정현적 기저함수를 선택하였다. 전사모의 실험 결과의 타당성을 검증하기 위해서 기존의 결과와 비교하여 일치된 결과를 얻었다. 공기 갭의 두께와 패치 길이, 이방성 비의 변화에 따른 공진 주파수가 제시되고 분석되었다.

• Annual Conference on Human and Language Technology
• /
• 1999.10e
• /
• pp.316-323
• /
• 1999

동사의 다의성은 결합되는 어휘에 따른 의미확장으로 설명된다. 본고에서는 한국어 지각동사의 기본의미가 갖는 논항관계를 바탕으로 코퍼스를 이용하여 다른 어휘와의 연여관계를 관찰함으로써 공기하는 어휘를 체계화시키고 기본의미와 의미확장의 실제 사용빈도를 조사하는데 그 의의가 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.279-289
• /
• 2017

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.971-984
• /
• 2003

This paper presents the hydraulic analysis of the air entrainment by the weir types. For the weir types, the stepped weir, the labyrinth weir and the gate underflow weir were selected, and the oxygen transfer efficiency was estimated by the site investigation and the hydraulic model tests. The most effective type for the oxygen transfer was stepped weir The more steps the stepped weir had, the higher efficiency it revealed. Oxygen transfer was proportional to the flow velocity, the Froude number, and the flow discharge in order. Hydraulic model tests showed that a nappe flow occurred at small flow rates. The concurrent condition of a nappe flow and a skimming flow occurred as flow rate increases, nappe flow at the upper part and skimming flow at the lower part. In the region of nappe flow, air inception occurred from the step edges due to flow separation, and air entrainment was made through a free-falling nappe, an air pocket, a nappe impact and a subsequent hydraulic jump. In the region of skimming flow, air entrainment occurred by the variation of water surface over the steps, but it was relatively small compared with nappe flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.837-845
• /
• 2013

An airlift pump can be used to pump liquids and sediments within itself, which cannot easily be pumped up by a conventional method, by using the airlift effect. This characteristic of the airlift pump can be exploited in a DCFC (Direct Carbon Fuel Cell) so that molten fuel with high temperature may be carried or transported. The basic characteristics of airlift are investigated. A simple system is constructed, where the reservoir is filled with water, a tube is inserted, and air is supplied from the bottom of the tube. Then, water is lifted and its flow rate is measured. Bubble patterns in the tube are observed in a range of air flow rates with the parameters of the tube diameter and submergence ratio, leading to four distinct regimes. The pumping performance is predicted, and the correlation between the supplied gas flow rate and the induced flow rate of water is found.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.340-343
• /
• 2004

The purposes of this study is to survey unfair aspect of specific provisions in the construction contract. The research method of this stud)'includes judicial precedents and a questionnaier survey. The result of thus study are as follows: 1) unfair payment condition gives increase to faulty construction. 2) shift of the responsibility gives increase to delay, 3) adjusted contract sum gives increase inappropriate compensation to contractor.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.215-224
• /
• 2009

A survey on the actual state of heating, cooling, ventilation, and air-flow and experimental measurement of temperature and humidity distribution in tomato greenhouse were performed to provide fundamental data required in the development of air-flow control technology. In single-span plastic houses, which account for most of 136 tomato greenhouses surveyed, roof windows, ventilation and air-flow fans were installed in a low rate, and installation specs of those facilities showed a very large deviation. There were no farms installed greenhouse cooling facilities. In the hot air heating system, which account for most of heating type, installation specs of hot air duct showed also a large deviation. The exhaust air temperature and wind speed in hot air duct also were measured to have a big difference depending on the distance from the heater. We are using the maximum difference as indicator to determine whether temperature distribution is uniform. However if the temperature slope is not identical in greenhouse, it can't represent the uniformity. We analyzed relation between the maximum difference and the uniformity of temperature and humidity distribution. The uniformity was calculated using the mean and standard deviation of data from 12 measuring points. They showed high correlation but were represented differently by linear in the daytime and quadratic in the nighttime. It could see that the uniformity of temperature and humidity distribution was much different according to greenhouse type and heating method. The installation guidelines for ventilation and air-flow fan, the spread of greenhouse cooling technology for year-round stable production, and improvement of air duct and heating system, etc. are needed.

• Annual Conference on Human and Language Technology
• /
• 1998.10c
• /
• pp.261-266
• /
• 1998

본 논문은 보조사로 인해 야기되는 한국어 미지격의 구문관계 중의성 해소를 위한 새로운 기법을 제안한다. 기존의 연구는 수작업으로 얻어진 동사의 의미적 선택 제약을 사용하는 방식과 단어 간의 공기패턴과 빈도를 어휘 레벨에서 추출하여 중의성을 해소하는 방식으로 나뉠 수 있다. 본 논문은 말뭉치에서 어휘 레벨이 아닌 개념패턴과 격의 분포 값을 자동으로 추출하여 미지격의 구문관계를 결정한다. 개념패턴과 용언의 격 분포 정보를 적용하여 구문분석 단계에서 실험한 결과, 본 논문이 제안한 방법은 92%의 미지격 결정 정확율을 보였다. 개념패턴은 지식의 저장공간을 줄이고 격 결정 범위를 확장할 수 있기에 범용 구문분석 시스템으로의 확장을 가능하게 한다.