• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.121-125
• /
• 2023

In winter, Jeju's Seogwipo and Jungmun areas are 2~3℃ warmer than Jeju City. The reason is that when the north wind over Halla Mountain crosses Baengnokdam of Halla Mountain and passes the 300m long and 260m vertical rock face of Donnaeko at an altitude of 1600m above sea level, the cold air turns into warm air through adiabatic compression, and the warmth rides on Donnaeko and flies to Seogwipo and Jungmun. Conversely, the south wind that rises over the sea in Seogwipo in the summer passes over Hallasan Mountain and passes 99 valleys before turning into a muggy, humid climate, making Jeju hot. In other words, it is because of The wind from Jeju City to Seogwipo-The Wind from Seogwipo to Jeju City.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.4
• /
• pp.465-476
• /
• 2023

This study introduces the development of a precast concrete double-wall, applicable to basement construction in apartment buildings. Unlike traditional precast concrete double walls, the developed double-wall doesn't require specialized manufacturing equipment such as a lathe. The constructability of these advanced technologies was validated through a full-scale mock-up test using the precast concrete double wall. The test specimens were constructed to represent a structural wall with a thickness of 250mm. It was observed that the quality of the in-situ concrete, filled between two single panels of 110mm thickness each, was excellent. The construction efficiency of the developed double-wall system for basement construction in an apartment building was also examined. Expert interviews about installation times of precast concrete elements were conducted to evaluate the speed of the basement floor's installation. The results showed that installation of precast concrete elements, including the proposed double walls, could be completed within 20 to 29 days for a basement in an apartment building. This indicates a three-fold increase in construction efficiency compared to traditional methods relying on in-situ casting.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.131-137
• /
• 2017

In order to safely protect high over current flowing into the main circuit at short-circuit without any explosion or fire, the enclosed cartridge fuse with a high interrupting capacity should be applied. But this fuse is impossible to be applied to an inner electronic circuit because of a limited space problem result from the miniaturization trend of products. Therefore, it is necessary to apply a sub-miniature fuse with a relatively small size. However the semi-enclosed fuse which is more free for an influx of air than the enclosed cartridge fuse and is possible to protect fuse elements with chemical and physical combination can be adoptable. But it has a limit of implementing the characteristic of a high breaking capacity. For these reasons, the Fe-42wt％Ni fuse elements alloy and fuse-link with less space were designed to increase a breaking capacity of sub-miniature fuse and its safety for fire and explosion was confirmed in this paper.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.2
• /
• pp.83-96
• /
• 2011

Currently, the commonly used tunneling method in Korea is NATM (New Austrian Tunneling Method). This method uses the rock bolt, shotcrete, and supporting system to maintain the strength of original soil and ensures the stability of tunnel by stabilizing the soil using the original strength of the soil in maximum after the excavation. In past years, wire-mesh reinforced shotcrete was common ones but currently steel-fiber reinforced shotcrete is being widely used for the tunnel construction site in Korea to save construction time with the advanced construction technology. The results further indicate that needs for the establishment of not only the specifications for shotcrete but the strengthening methods for the under reinforced shotcrete sections. Therefore, this study deals with the development of a new steel-fiber to ensure the stability of tunnels that are under reinforced with steel-fibers and to overcome the shortcomings of conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4656-4663
• /
• 2010

In this study, the 3D computational fluid dynamics (CFD) was performed in relation to the internal fluid characteristics, flow distribution, air mean ages, and residence time for the development of the most optimal model in the complex post-disposal device. As it is expected that a channeling (drift) would be made by the semi-dry reactor due to the large difference in the flow distribution by the compartment in the bag filter, a structural improvement should be urgently made for more uniformed flow distribution in the bag filter. In addition, it showed the possibility that the velocity field and distribution characteristics of the residence time could be improved through a modification to inlet structure of the spray dryer reactor. The complex post-disposal device, modified and supplemented with this analysis, integrated the semi-dry reactor and the bag filter in a single body, so it follows that the improvement can make the device compact, the installation area, the operation fee, and management more convenient.

• Development and Reproduction
• /
• v.2 no.2
• /
• pp.115-133
• /
• 1998

Recently public concerns about the endocrine disrupting chemicals (EDC) have resulted in the increased legistrative and regulatory attentions in many countries. Endocrine disrupter is an exogeneous chemical interfering the synthesis, transport binding, action or elimination of natural hormones in the body, which are responsible for the maintenance of homeostasis, reproduction, development and/or behavior. Reported possible harmful effects on human and animal lives, possible developmental anomalities, reproductive malfunctions and behaviors, and the ways of EDC accumulation in animal kingdom are reviewed. The current scientific papers and knowledges on the global contamination of EDCs demonstrates the conclusive data that EDCs have the potentials to cause the calamitous extermination of human and animal species by the global contamination.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.310
• /
• pp.67-72
• /
• 2002

미쓰비시(삼릉)전기 플랜트건설총괄부의 전력플랜트 건설공사는 수력$\cdot$화력플랜트 및 변전설비를 대상으로 하고 있으며, 수차$\cdot$수차발전기$\cdot$가스절연개폐장치(이하 ''GIS''라 한다), 변압기, 배전반 및 관련 제어기기 등의 설치 및 기기간의 배선공사 설계$\cdot$시공을 담당하고 있다. 최근의 전력플랜트를 둘러싼 일본의 시장환경은 신설 플랜트는 감소하고 갱신$\cdot$기기개수(개조, 수선) 공사의 비율이 커지고 있으며, 신설$\cdot$개보수 공사를 불문하고 공사품질의 유지와 공사비 저감을 위한 공법$\cdot$작업의 개선과 설계$\cdot$계획 업무의 합리화를 추진하여 왔다. (1) 기자재 개발에 의한 공법$\cdot$작업 개선 대형수력발전기의 로터조립용 다브테일키 박아놓기(타입)장치, 스테이터코일 분해(갱신)용 코일 엔드절단 및 코일뽑기공구, 터빈발전기 센터링용 유압잭, GIS 설치용 작업용발판을 개발하여 적용함으로써 공법 개선과 작업효율의 향상을 실현하였다. (2) 공사계획 방법의 개선 변전플랜트에서의 공기단축을 목적으로 하는 현지 설치 최적공정 책정방법의 개발$\cdot$적용, 또한 화력플랜트에서의 공사물량의 저감과 설계작업의 효율 향상을 목적으로 하는 케이블 배선 설계$\cdot$계획 방법의 개발 및 적용으로 설계업무의 개선, 공사비 저감을 도모하였다.

• Bulletin of Food Technology
• /
• v.25 no.1
• /
• pp.28-43
• /
• 2012

한국 식품화의 위상은 구이류 및 전골류 조리시 발생하는 냄새, 연기, 기름 튐 등의 문제로 인해 낮게 평가 되고 있는 실정이다. 현재 사용하고 있는 불판 및 가열원료가 다양하여 맛의 균일화가 어렵고 사용 후 세척처리가 번거로운데다 환경오염까지 발생시킨다. 구이 및 전골에 소비되는 에너지가 잔량을 모두 섭취할 동안 연속적으로 공급하므로 에너지 소비 및 내부 공기조건이 열악한데 반해 연기 및 냄새와 관련된 제품의 개발과 생산에 참여하는 업체는 증가하고 있다. 하지만 기술력 및 자본력이 미미한 수준에 있어 많은 기술적 측면의 보완이 요구된다. 또 소스, 양념, 부재료 등의 가공처리를 외국인의 식문화에 적합하도록 맛, 향, 관능의 관점에서 규격화 및 현지화도 요구되며, 공급되는 원재료의 고기종류, 규격, 등급 등의 조건들이 국내 관능뿐만 아니라 외국인의 관능적인 관점에서 표준화가 시급하다. 주한 외국인을 대상으로 한 설문에서 59%가 한국음식의 세계화가 가능하고 89.9%가 한식메뉴를 소개할 의사가 있는 것으로 조사되었다. 이는 외국인 소비자의 인지도에서 불고기와 갈비 등의 구이류가 다른 한식보다 선호도가 증가하는 것이기 때문인 것으로 분석된다. 2009년 농림수산식품부가 '한식 세계화 프로젝트'를 선포하여 1만여 곳의 해외식당을 2017년까지 4만 곳으로 증가할 예정이다. 따라서 한식문화의 표준화를 위한 용어 재료 기구 단위 등의 표준화 기반개발을 바탕으로 조리 및 식문화의 표준화가 요구되고 있다. 우리나라는 구이전문점들이 일반주거 및 아파트 단지에 위치하고 있어 연기와 냄새에 대한 민원 및 분쟁이 발생되고 있다. 이에 집진, 제연 설비의 설치비용이 많이 소요되고 있으며 대부분의 구이설비가 수입제품으로 규모가 매우 크다. 일본의 경우 2002년도부터 음식점에서 발생하는 연기에 관한 규제를 법제화하였다. 위의 기술적, 경제 산업적, 사회 문화적 측면의 필요성을 바탕으로 본 연구는 연기 음식 냄새 저감 성능이 뛰어난 친환경 저에너지의 가열조리 기구 개발 및 국내외 현장적용 산업화 모델 구축을 통해 한식당 시설 개선 및 고급화를 유도하고 세계시장에서의 한식문화 경쟁력을 확보코자 한식문화 경쟁력 확보와 경제, 문화, 산업적 성공 비즈니스 모델을 제시하였다.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.651-654
• /
• 1999

Using recombinant human growth hormone as a model protein, we carried out unfolding by adding a denaturant such as urea, guanidine HCl, or SDS followed by refolding by dilution and dialysis. The objectives were to monitor the structural changes during in vitro refolding process and, based on the results, to develop a quantitative method of refolding progress assessment. The changes in surface hydrophobicity were measured by fluorescence tagging of 1-anilinonaphthalene-8-sulfonate(1,8-ANS) to the hydrophobic portions, and those in the secondary structure were monitored by using far UV-CD(circular dichroism) spectroscopy. Also, we used RP-HPLC to separate and quantify the folded and unfolded proteins to correlate the result with the structure analysis. Our results indicate the surface hydrophobicity are well correlated with the formations of the secondary structure, primarily ${\alpha}$-helices, as well as the disulfide bridges. We expect this monitoring technique can be applied in industrial fields as a means to quantitatively assess the progress of in-vitro refolding of recombinant proteins.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.71-78
• /
• 2017

Scattered radiation is inherent phenomenon of x-ray, which occurs to the subject (or patient). Therefore it cannot be avoidable but also interacts as serious noise factor because the only meaningful information on x-ray radiography is primary x-ray photons. The purpose of this study was to quantify scattered radiation for various shooting parameters and to verify the effect of anti-scatter grid. We employed beam stopper method to characterize scatter to primary ratio. To evaluate effect on the projection images calculated contrast to noise ratio of given shooting parameters. From the experiments, we identified the scattered radiation increases in thicker patient and smaller air gap. Moreover, scattered radiation degraded contrast to noise ratio of the projection images. We find out that the anti-scatter grid rejected scattered radiation effectively, however there were not fewer than 100% of scatter to primary ratio in some shooting parameters. The results demonstrate that the scattered radiation was serious problem of medical x-ray system, we confirmed that the scattered radiation was not considerable factor of dig ital radiog raphy.