• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.212-220
• /
• 2002

Spray drying was used a means for microencapsulation of Aster scaber and Aster glehni. The optimum conditions of spray drying were found to be 210$^{\circ}C$ for the inlet temperature and 5 $m\ell$/min for the feeding rate. The color difference decreased by 12∼25 % far the herb extracts depending on storage temperatures. With an increase in storage temperature, color of the control changed considerably compared to microencapsulated powders. This is due to the fact that wall materials minimized effect of oxygen on the herb extracts. Microencapsulated powders in the amounts of 50 ppm and 250 ppm added to hydrogenated soybean oils led to lower acid values and conjugated diene values during 6 day storage. Compared to the control, the herb extracts displayed 16∼48% increase in antioxidation effect, while the microencapsulated powders exhibited 46∼88% increase. Extracts also showed lower conjugated dienoic acid contents than those of the control. Although antioxidation effect of the microencapsulated powders did not prevail on the significant level in the early stage of storage of oils tested, it became predominant after one week of storage as wall materials were gradually degraded under the high temperature thereby releasing core material from the microcapsule.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.3
• /
• pp.127-135
• /
• 2001

Achieved to grasp possibility to use compost that make food waste and sawdust (bulking agent) by raw material in this research droopingly to bulking agent calamity. To be kept by aerobic experiment method to 4 composting device that air is supplied Food Waste + Sawdust, Livestock Feces + Sawdust, Food Waste + Compost, Livestock Feces + Compost free medical care and investigated composting sledding and temperature, pH, the moisture rate, heavy metals item etc. Judged that food waste of the moisture rate mix experiment result food waste input (food waste and sawdust composting done material mean) compost happened after resources anger as bulking agent food waste and Livestock Feces quantity is 72~77%, because axis dries to promote optimum composting progress appearing by 64~65%, thing which use need and was difficult to set salt 1% that is by-product compost standard when use compost as bulking agent of food waste but by dilution effect of Livestock Feces quantity using compost being expose that preservation is available by standard low because salt content density of done compost becomes found possibility that can solve salt content problem.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.103-110
• /
• 2012

The flow field, fuel-air mixing, and behaviors of turbulent flames have been investigated using the large eddy simulation (LES) numerical technique in a premixed swirl combustor equipped with EV double cone burners. Recirculation zones are generated by the swirl burner, and lean premixed flames are formed within a distance of 0.2 m from the tip of the burner. NOx emission of 0.46 ppm is predicted at 1 atm and an air/fuel ratio of 38.7. However, most of the CO generated in a flame front continues to be oxidized as it moves toward the exit, and CO emission of 5.45 ppm is predicted at the exit. The NOx emission can be reduced by decreasing the pressure and air/fuel ratio. The characteristics of NOx emission have been investigated through RANS simulations for various fuel injection types, and it is found thereby that five-lance-hole injection produces the lowest NOx emission rate.

• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.167-172
• /
• 2012

In order to analyze the formation mechanism of iron oxide nanoparticles, we measured the heat flow of $Fe(OL)_3$ precursor with temperature, and TEM images and AC susceptibility of aliquots samples sequentially taken from the reaction solution, respectively. The thermal decomposition of two OL-chain from $Fe(OL)_3$ produced the Fe-OL monomer, which were contributed to the formation of iron oxide nanoparticles. In the initial stage of nanoparticles formation, the small iron oxide nanoparticles had ${\gamma}-Fe_2O_3$ structure. However, as the iron oxide nanoparticles were rapidly growth, the iron oxide nanoparticles showed ${\gamma}-Fe_2O_3$-FeO core-shell structure which the FeO layer was formed on the surface of ${\gamma}-Fe_2O_3$ nanoparticles by insufficient oxygen supply from the reaction solution. These nanoparticles were transformed to $Fe_3O_4$ structure by oxidation during long aging time at high temperature. Finally, the $Fe_3O_4$ nanoparticles with high saturation magnetization and stable in the air could be easily synthesized by the thermal decomposition method.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1991.06a
• /
• pp.28-28
• /
• 1991

후두암의 수직절제 수술후의 후두 재건 목적은 기관절개를 통하지 않고 후두를 통한 호흡이 가능하도록 하면서 연하시 기도흡인을 피하기 위한 sphincter 능력의 보존, 그리고 발성이 가능하도록 성대진동 mechanism을 재건하는데 있다. 오늘날 수많은 후두학자들에 의해서 고안 개발된 다양한 재건 방법이 있다. 연자는 광범위한 후두절제에 따른 큰 결손을 메우기 위해 bulky하면서도 점막 상피의 재생이 용이한 재건 피판으로 흉유돌근골막 피판을 이용하여 후두 결손부를 재건하여 보았다. 방법은 성견 3마리를 대상으로하여 thiopental sodium 정맥주사로 전신마취를 시행한 후 설골에서부터 흉골상까지 경부 정중앙의 피부를 절개하고 후두를 노출시켜 후두 수직절제술을 시행하였다. 흉유돌근과 흉골에 부착된 골막을 박리하여 흥유돌근골막 피판을 제작한 후 골막이 후두강 안쪽으로 되도록하여 골막연과 후두점막을 봉합하였다. 그리고 3, 5, 9개월에 후두적출술을 시행하여 병리조직학적 및 수술후 경과를 관찰하였다. 3실험견 모두 기관절개술 없이 후두를 통한 호흡이 가능하였고 흡입성 폐렴이나 피하기종등의 합병증없이 창상이 치유되었으며 발성도 양호하였다. 이식된 골막위로 신생혈관의 출현과 함께 점막재생이 잘되 있었다. 단지 봉합사 주위에 소량의 육아종이 관찰되었다. 조직학적으로는 섬유조직위로 편평상피가 재생되었으며 성문하부에서는 일부 섬모가 있는 호흡기 점막도 관찰되고 골막하부에 신생골 형성은 관찰할 수 없었다. 골막 피판은 그 유연성 때문에 결손부위의 점막연에 맞춰도 tension이 없고 공기 누출이 되지 않게 봉합이 가능할 뿐 아니라 점막이 재생할 수 있는 frame-work의 역할을 하는 것으로 사료되었다. 이상과 같은 사실로 미루어 흉유돌근 자체가 견실하고 골막에 혈류공급이 잘되어 창상치유에 좋을 뿐 아니라 큰 후두결손부의 재건이 가능하리라고 사료되었다.로서 몇가지 앞으로의 치료지침에 도움이 되는 결과를 얻었기에 보고하는 바이다. 1) 성별 분포는 남자 16(39 %), 여자 25 (61%)이었으며 1 : 1.5의 빈도를 보였다. 2) 연령 분포는 20대와 30대에서 남녀 모두 25명으로 대부분을 차지하였다. 3) 부식제의 종류는 빙초산이 26명 (63.4 %)으로 대부분을 차지하였고 염산 7 (17.1 %) Lye 3 (0.7 %) 의 순이었다. 4) 음독후 12시간내에 식도경술을 받은 환자가 3명(0.7 %) 12-24시간에 받은 환자가 17명(41.5 %), 24 - 48시간에 받은 환자가 11명(26. 8%)으로 48시간 내에 시행받은 환자가 전체의 75.6%를 차지하였다. 5) 식도경 검사상 나타난 식도화상은 Grade I 11명 (26.8%) G.ade II 18(43.9%) Grade III 7명(17.1%) 이었으며 Grade II 인 경우가 18명(43.9%)로 가장 많았으며 Grade I 11명(26.8 %), Grade III 7명 (17.1 %) Normal 5명 (12.2 %) 순이었다. 6) 조기 식도경 검사에서 41명중 oral cavity burn이 없었던 경우가 15명(36. 1 %) 이었으며, oral cavity burn이 있었던 26명중 5명(19 .2 %)에서 Esophageal burn이 없었다 특히 Esophageal burn의 Grade II, III 25명 중 9명(29.6 %)에서 oral cavity burn이 없었다. 7) 식도 부식중 환자의 치료 원칙으로 Grade I, II, III에서 항생제 및 보존적 치료를 하였으며 Grade I에선 oral feeding을 시켰고 Steroid는 경우에 따라 투여하였으며 Grade III에선 원칙적으로 사용치 않았다. 식도조영술은 Grade I II III에서 3주 후에 모두 시행하였다. 8) 3주 후 식도조영술을 실

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.259-266
• /
• 2018

In recent years, the early strength of concrete is important in order to shorten the time of form removal at the construction site. The purpose of this study is to analyze the moment of form removal as investigating the amount of cement contents and the physical properties and strength of the concrete according to types of admixture in the curing temperature of $10^{\circ}C$ for concrete of 21 to 27 MPa. As a result, it was found that compressive strength of concrete could not be secured 5 MPa by 36 hours even if the amount of cement contents were increased to $360kg/m^3$ with plain admixture. Also, it was confirmed that the strength improvement rate was excellent when using the accelerating agent with polycarboxylic acid type, and the moment of compressive strength of 5 MPa was estimated at 30 hours.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.91-101
• /
• 2000

The emission sources of volatile organic compounds (VOCs) are wastewater treatment plants. sanitary landfills, automobile industries, and so on. The VOCs are harmful to human beings because of their toxicity and carcinogenicity, and cause the serious air pollution problem producing ozone ($O_3$) as a result of photochemical reaction. To investigate the emission of VOCs from wastewater treatment plant, aeration basins at the City of Los Angeles' Hyperion Treatment Plant were selected and measured flux was compared with calculated flux. For compounds commonly associated with wastewater (DCM, TCM, PCE, UM, DCB, UND) and not expected in vehicle exhaust or ambient air coming off the ocean, concentrations immediately downwind of the aeration basins were a factor of ten or higher than those measured in the upwind air. The airborne flux of less degradable or non-biodegradable compounds, e.g., DCE, DCM, TCA, DCA, TCM, PCE, DCB, through an imaginary plane at the downwind side of the aeration basins was in agreement with the estimated flux from measured liquid phase concentrations. Henry's constant. aeration rate, and an assumption of bubble saturation. For several compounds (PCE, DCE, TCA), the ratio (measured flux/calculated flux) is almost unity.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.724-729
• /
• 2013

Simultaneous nitrification and denitrification (SND) occurs concurrently in the same reactor under micro dissolved oxygen (DO) conditions. Anaerobic zone was applied for phosphorus release prior to an aerated membrane bio-reactor (MBR), and anoxic zone was installed by placing a baffle in the MBR for enhancing denitrification even in high DO concentration in the MBR. Phosphorus removal was tested by alum coagulation in the anaerobic reactor preceding to MBR. DO concentration were 2.0, 1.5, 1.0, 0.75 mg/L in the MBR at different operating stages for finding optimum DO concentration in MBR for nitrogen removal by SND. pH was maintained at 7.0~8.0 without addition of alkaline solution even with alum addition due to high alkalinity in the raw sewage. Both TCODcr and $NH_4^+$-N removal efficiency were over 90% at all DO concentration. TN removal efficiencies were 50, 51, 54, 66% at DO concentration of 2.0, 1.5, 1.0, 0.75 mg/L, respectively. At DO concentration of 0.75 mg/L with addition of alum, TN removal efficiency decreased to 54%. TP removal efficiency increased from 29% to 95% by adding alum to anaerobic reactor. The period of chemical backwashing of the membrane module increased from 15~20 days to 40~50 days after addition of alum.

• Membrane Journal
• /
• v.22 no.1
• /
• pp.8-15
• /
• 2012

Tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membranes with $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ porous coating layer were prepared by extrusion and dip coating technique. XRD and SEM result showed the tubular membrane possessed the perovskite structure and porouscoating layer (thickness= about $2{\mu}m$) in surface. The oxygen permeation test was measured at condition of ambient air (feed side) and vacuum (permeate side) in the temperature range from 750 to $950^{\circ}C$. The oxygen permeation flux of $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ tubular membrane with $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ porous coating layer reached maximum $3.2mL/min{\cdot}cm^2$ at $950^{\circ}C$ and was higher than non-coated $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ tubular membrane. Long-term stability test result indicated that the oxygen permeation flux was quite stable during the 11 day.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.83-89
• /
• 2011

A series of full-scale testing was conducted to examine the effect of stairwell pressurization on the pressure differential between the stairwell and the auxiliary room and between the auxiliary room and the residence. Also, flow velocity profiles at open doors were measured. The building tested was a condominium that had twenty floors above the ground and two floors underground. For pressurization of the stairs, a blower was used to supply air into the stairwell at one location underground. Thirteen different cases were tested, and test variables included the number of floors with open doors and the flow rate of the air supply. When the doors on the first floor were open, the pressure differential between the stairwell and the auxiliary room was distributed almost uniformly except for locations near the first floor. When the flow rate was in the range of 180~270 CMM and the doors of one floor were open, the flow velocity could satisfy the requirement of fire safety standards and the stairwell pressure was positive at all levels. However, the minimum pressure requirement (10 Pa) could not always be satisfied. When doors on two floors were open, the flow velocity requirement could be satisfied by increasing the flow rate, but it was found impractical to satisfy the minimum pressure requirement without causing excessive pressure differential in the area near the blower.