[KSCI] Korea Science Citation Index Service

Preparation and Oxygen Permeability of Tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ Membranes with $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ Porous Coating Layer

Kim, Jong-Pyo (Department of Chemical Engineering, Chungnam National University)
Pyo, Dae-Woong (Greenhouse Gas Research Center, Climate Change Technology Research Division, Korea Institute of Energy Research)
Park, Jung-Hoon (Greenhouse Gas Research Center, Climate Change Technology Research Division, Korea Institute of Energy Research)
Lee, Yong-Taek (Department of Chemical Engineering, Chungnam National University)

Publication Information

Membrane Journal / v.22, no.1, 2012 , pp. 8-15 More about this Journal

Abstract

Tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membranes with $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ porous coating layer were prepared by extrusion and dip coating technique. XRD and SEM result showed the tubular membrane possessed the perovskite structure and porouscoating layer (thickness= about $2{\mu}m$ ) in surface. The oxygen permeation test was measured at condition of ambient air (feed side) and vacuum (permeate side) in the temperature range from 750 to $950^{\circ}C$ . The oxygen permeation flux of $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ tubular membrane with $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ porous coating layer reached maximum $3.2mL/min{\cdot}cm^2$ at $950^{\circ}C$ and was higher than non-coated $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ tubular membrane. Long-term stability test result indicated that the oxygen permeation flux was quite stable during the 11 day.

Keywords

oxygen permeation; perovskite tubular membrane; porous coating layer; BSCF; LSTF;

Citations & Related Records

Times Cited By KSCI : 1 (Citation Analysis)

Reference
Cited By KSCI

1	S. J. Lee, S. I. Jeon, and J. H. Park, "Fabrication and stability of Pd coated Ta/YSZ cermet membrane for hydrogen separation", Membrane Journal, 20, 69 (2010).
2	K. H. Lee, "Membrane separation of carbon dioxide", Membrane Journal, 4, 78 (1994).
3	K. Thambimuthu, M. Soltanieh, and J. C. Abanades, "IPCC special report on carbon dioxide capture and storage", ed. O. Davidson, B. Metz, 1, 6, Cambridge University Press, London (2005).
4	J. P. Kim, J. H. Park, and Y. Yoon, "Effect of sealant materials on oxygen permeation in perovskite oxide membrane", J. Korean Ind. Eng. Chem., 19, 382 (2008).
5	J. Luyten, A. Buekenhoudt, W. Adriansens, J. Cooymans, H. Weyten, F. Servaes, and R. Leysen, "Preparation of $LaSrCoFeO_{3-x}$ membranes", Solid State Ion., 135, 637 (2000). DOI ScienceOn
6	J. P. Kim, J. H. Park, and K. Y. Kim, "Comparison of oxygen permeability and stability of $La_{0.6}Sr_{0.4}B_{0.2}Fe_{0.8}O_{3-{\delta}$ (B=Co, Ti) Membrane", J. Energy & Climate Change, 2, 75 (2007).
7	J. H. Park, J. P. Kim, and I. H. Baek, "Preparation and oxygen permeation properties of $La_{0.7}Sr_{0.3}CO_{0.2}Fe_{0.8}O_{3-{\delta}}$ membrane", J. Korean Ind. Eng. Chem., 19, 477 (2008).
8	K. T. Lim, T. L. Cho, K. S. Lee, I. S. Han, D. W. Seo, K. S. Hong, K. Bai, and S. K. Woo, "Fabrication and oxygen permeation properties of $La_{1-x}Sr_{x} B_{1-y}Fe_{y}O_{3-{\delta}}$ (B=Co, Ga) perovskite-type ceramic membrane" Membrane Journal, 11, 143 (2001).
9	Z. Shao, W. Yang, Y. Cong, H. Dong, J. Tong, and G. Xiong, "Investigation of the permeation behavior and stability of a $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}$ oxygen membrane", J. Membr. Sci., 172, 177 (2000). DOI ScienceOn
10	Z. Shao, G. Xiong, J. Tong, H. Dong, and W. Yang, "Ba effect in doped $Sr(Co_{0.8}Fe_{0.2})O_{3-{\delta}}$ on the phase structure and oxygen permeation properties of the dense ceramic membranes", Sep. Purif. Technol., 25, 419 (2001). DOI ScienceOn
11	S. Svarcova, K. Wiik, J. Tolchard, H. J. M. Bouwmeester, and T. Grande, "Structural instability of cubic perovskite $BaxSr_{1-x}Co_{1-y}Fe_{y}O_{3-{\delta}}$ ", Solid State Ion., 178, 1787 (2008). DOI ScienceOn
12	Z. Yang, A. S. Harvey, and L. J. Gauckler, "Influence of $CO_{2}$ on $Ba_{0.2}Sr_{0.8}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ at elevated temperatures", Scripta Mater., 61, 1083 (2009). DOI ScienceOn
13	V. V. Kharton, A. L. Shaulo, A. P. Viskup, M. Avdee, A. A. Yaremchenko, M. V. Patrakeev, A. I. Kurboakov, E. N. Naumovich, and F. M. B. Marques, "Perovskite-like system (Sr, La) ( $(Fe,Ga)O_{3-{\delta}}$ : structure and ionic transport under oxidizing conditions", Solid State Ion., 150, 229 (2002). DOI ScienceOn
14	J. P. Kim, J. H. Park, E. Magnone, and Y. Lee, "Significant improvement of the oxygen permeation flux of tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membranes covered by a thin $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ layer", Mater. Lett., 65, 2168 (2011). DOI ScienceOn
15	A. A. Yaremchenko, M. V. Patrakeev, V. V. Kharton, F. M. B. Marques, I. A. Leonidov, and V. L. Kozhevnikov, "Oxygen ionic and electronic conductivity of $La_{0.3}Sr_{0.7}Fe(Al)O_{3-{\delta}}$ perovskites", Solid State Ion., 6, 357 (2004). DOI ScienceOn
16	I. Kaus, K. Wiik, K. Kleveland, B. Krogh, and S. Aasland, "Oxygen transport properties in $La_{1-x}Sr_{x}Fe_{1-y}M_{y}O_{3-{\delta}}$ (M = Cr, Ti), 0.2 < x < 0.8, 0.2 < yTi < 0.5, 0.1 < yCr < 0.3", Solid State Ion., 178, 817 (2007). DOI ScienceOn
17	J. H. Park, K. Y. Kim, and S. D. Park, "Oxygen permeation and stability of $La_{0.6}Sr_{0.4}Ti_{x}Fe_{1-x}O_{3-{\delta}}$ (x = 0.2 and 0.3) membrane", Desalination, 245, 559 (2009). DOI ScienceOn
18	X. Zhu, Y. Cong, and W. Yang, "Oxygen permeability and structural stability of $BaCe_{0.15}Fe_{0.85}O_{3-{\delta}}$ membranes", J. Membr. Sci., 283, 38 (2006). DOI ScienceOn
19	H. J. M. Bouwmeester, H. Kruidhof, and A. J. Burggraaf, "Importance of the surface exchange kinetics as rate limiting step in oxygen permeation through mixed-conducting oxides", Solid State Ion., 72, 185 (1994). DOI
20	Z. Chen, R. Ran, Z. Shao, H. Yu, J. C. Diniz da Costa, and S. Liu, "Further performance improvement of $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ perovskite membranes for air separation", Ceram. Int., 35, 2455 (2009). DOI ScienceOn
21	L. Tan, X. Gu, L. Yang, W. Jin, L. Zhang, and N. Xu, "Influence of powder synthesis methods on microstructure and oxygen permeation performance of $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ perovskite-type membranes", J. Membr. Sci., 212, 157 (2003). DOI ScienceOn
22	Z. Shao, W. Yang, Y. Cong, H. Dong, J. Tong, and G. Xiong, "Investigation of the permeation behavior and stability of a $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ oxygen membrane", J. Membr. Sci., 172, 177 (2000). DOI ScienceOn
23	H. Wang, R. Wang, D. T. Liang, and W. Yang, "Experimental and modeling studies on $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ (BSCF) tubular membranes for air separation" J. Membr. Sci., 243, 405 (2004). DOI ScienceOn
24	J. P. Kim, S. H. Son, J. H. Park, and Y. Lee, "Fabrication and permeation properties of tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membranes for oxygen separation", Korean Chem. Eng. Res., 6, in press (2011).
25	X. Tan, Z. Wang, B. Meng, X. Meng, and K. Li, "Pilot-scale production of oxygen from air using perovskite hollow fibre membranes", J. Membr. Sci., 352, 189 (2010). DOI ScienceOn