• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.163-173
• /
• 2010

A significant number of projects have been managed by US Army Corps of Engineers FED. Today, more information must be provided to the parties involved in the projects by phase than ever before. Specifically, USFK`s construction projects have been managed by FED(Far East District). Recently, however, large US private construction companies have been filling the role previously taken by FED. However, there is few construction managers to implement FED project in Korea. Accordingly, this study analyzes FED projects practices with focus on the construction management actors in order to suggest guideline. This study suggests a model FED construction process(Bid, Contract, Construction, As-Built Phase) by analyzing the existing FED project process using a IDEF0 methodology.

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.1-21
• /
• 2016

The purpose of this study is to analyze job of die and mold makers for apprenticeship education of specialized high school using DACUM method. The contents of this study were to identify the duties, specific tasks performed and the level of importance, difficulty, frequency and entry level on each task. This study also make out a DACUM chart of die and mold makers for apprenticeship education of specialized high school. The DACUM committee, which consisted of one facilitator, nine die and mold experts, one recorder and one coordinator, was established to conduct DACUM. The conclusions are as follows; First, this study defines a die and mold makers as 'a person who make it possible to manufacture/assemble/inspect die and mold parts using various machine tool'. Second, duties in job of die and mold makers for apprenticeship education were total 12 and total tasks in job of die and mold makers for apprenticeship education were 86. Third, this study determine the level of importance, difficulty, frequency and entry level about each task. Finally, this study make out a DACUM chart of die and mold makers for apprenticeship education of specialized high school based on the results of DACUM job analysis. And knowledge, skills, tools, and positive behaviors, future trends/concerns about die and mold makers for apprenticeship education of specialized high school were presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.707-712
• /
• 2015

During the welding process, welding distortion is caused by the non-uniformity of the temperature distribution in the weldment. Welding distortion is redistributed because the residual stress and rigidity change according to the removal of the welded structure. In shipbuilding in particular, this phenomenon may be observed during the cutting process of lugs that are attached to blocks for transfer. The redistribution of welding distortion also causes problems, such as damage to the cutting tool. The aim of this study is to experimentally analyze the redistribution of welding distortion because of the partial removal of the welded structure. In the experiments conducted in this study, fillet welding and cutting were performed, and longitudinal bending and angular distortion in the welded structures were then investigated and analyzed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.131-137
• /
• 1986

Cutting oil cools the chip and a tool as well as lubricates the chip-tool interface, the flank and machined surface. Rehbinder effect has been known as a phenomenon, the reduction of mechanical strength, when the metal is exposed to a polar organic environment or the surface of metal is coated with some polar organic substances. About the cause of Rehbinder effect there have been many different ideas by Rehbinder, Shaw, Barlow, Sakida and etc. In this report, the efect of polar organic substance( $C_{6}$ $H_{5}$C $H_{3}$+ $C_{6}$ $H_{4}$(C $H_{3}$)$_{2}$+ $C_{4}$ $H_{9}$OH+ $C_{6}$ $H_{12}$ $O_{2}$) (magic ink) upon the mechanism of chip formation on the orthogonal cutting of copper and mechanical properties of the work material are experimentally discussed with various rake angles. As expected no lubrication action could be noticed, but the shear angle increased and the cutting force and shear strain on the shear plane decreased, therefore the work material must be embrittled under polar organic substance.substance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.270-270
• /
• 2011

전이금속(transition metal) 질화물(nitride)은 높은 경도, 내마모성, 부식 저항성 그리고 내열성 등과 같은 우수한 기계적 물성 때문에 많은 연구가 되어 왔다. 이 중 질화 티타늄은 높은 경도, 내식 및 내마모의 우수한 기계적 특성으로 공구(tool)와 같은 제품의 수명 향상을 위한 표면 코팅소재로 사용되어 왔으며, 금(gold)색의 미려한 색상을 이용한 제품의 외관 표면처리와 인체에 무해한 특성을 활용한 정형외과 및 치과용 보형물의 수명 및 안정성 향상 등 다양한 분야에 응용 되고 있다. 본 연구에서는 아크방전을 이용한 경사 코팅법으로 질화 티타늄을 합성하였으며, 경사 코팅에 따른 단층 및 다층 박막(2~3 layer)의 미세조직 변화와 그 물성을 평가하였다. 아크 소스에 장착된 타겟은 120 $mm{\Phi}$, 99.5%의 Ti 타겟을 사용하였고, 시편과 타겟 간의 거리는 약 30 cm이며, 시편은 냉연강판과 SUS를 사용하였다. 시편을 진공용기에 장착하고 ~10-6 Torr까지 진공배기를 실시하고, Ar 가스를 진공용기 내로 공급하여 ~10-4 Torr에서 시편에 bias (Pulse : 400 V)를 인가한 후 아크를 발생시켜 약 5분간 청정을 실시하였다. 플라즈마 청정이 끝나면 시편에 인가된 bias를 차단하고 코팅하였다. 경사 코팅을 위한 시편의 회전각은 45$^{\circ}$, -45$^{\circ}$이며, 질화 티타늄의 두께는 약 3 ${\mu}m$로 동일하게 코팅 하였다. 45$^{\circ}$ 단일층의 경우 0$^{\circ}$ 단일층보다 경도가 감소하나 zigzag 구조의 다층으로 갈수록 45$^{\circ}$ 단일층과 비교하여 확연히 경도가 증가함을 볼 수 있었다. 다층 질화 티타늄의 경사 코팅을 통해 박막의 미세조직 변화를 SEM 이미지를 통해 확인하였으며 증착 방식에 따라 경도, 조도, 반사도 등의 물성 변화가 나타났다. 본 연구에서 얻어진 결과를 이용하여 다양한 형태의 박막구조 제어를 통한 물성변화가 가능할 것으로 예상된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.637-637
• /
• 2012

본 연구에서는 내수침수 저감을 위하여 효율적(effective)인 우수저류조 설치에 따른 침수저감효과 극대화 방안을 제시하고자 한다. 여기서 효율성(effectiveness)은 침수저감량의 극대화 측면과 비용의 최소화 측면 두 가지로 구분된다. 최적 방재 시설물의 설치는 단순 설치비용 대비 저감량이 가장 큰 안을 제시하는 것은 의미가 없으며 일정 기준 이상의 방재성능을 발휘하면서 주어진 예산안에서 최적안을 찾아야 하므로 비용의 최소화 측면과 침수 저감량, 즉 맨홀에서의 월류 저감량을 최대화 하는 두 가지의 목적을 동시에 달성해야 한다. 따라서 본 연구에서는 다목적 최적화 알고리즘의 적용을 통하여 우수저류조 최적 설치지점을 선정하는 기법을 제안하였다. 본 연구에 적용한 다목적 최적화 방법으로는 목적함수의 최적해 탐색 효용성 측면에서 우수하다고 평가되고 있는 유전자 알고리즘을 적용하였다. 다목적 최적화의 경우 해의 우열을 판단하기 위한 적합도 함수는 실제 각 목적함수의 적합도 값(real fitness value)이 아닌 해의 상대적인 우열(dominance or non-dominance)에 따라 부여되는 등급(rank)에 의해서 해의 우열이 결정되며 여기서는 Fonseca and Fleming(1993)이 제안한 Ranking method를 적용하여 적합도를 결정하였다. 한편 도시 우수관망의 해석 및 우수저류조 설치에 따른 월류량 분석을 위하여 미 환경청(US Environmental Protection Agency; EPA)에서 제공하고 있는 EPA-SWMM 5.0 engine을 사용하였으며 최적화 알고리즘의 구성을 위하여 Visual C++와 SWMM DLL을 연동하여 사용하였다. 연구 대상유역은 인천 청라지구(3공구)를 대상으로 기법의 적용성을 검토하였으며 저류지 설치에 따른 비용함수는 EPA(2002)에서 제안한 저류지 체적대비 공사비용을 원화로 환산한 후 청라지구의 공시지가를 고려하여 결정하였다. 최적화 기법의 적용 결과 저류지 설치비용에 따라 최대로 월류량을 저감시킬 수 있는 우수저류조 최적 설치위치의 조합(Pareto-front)을 결정할 수 있었다.

• Journal of Chest Surgery
• /
• v.31 no.5
• /
• pp.531-535
• /
• 1998

In 1964, Abbott and Colleagues published the world's first heterotopic heart transplantation technique in the rat. Their method established circulation by end-to-end anastomoses of the graft's aorta and pulmonary artery to the recipient's abdominal aorta and Inferior Vena Cava(IVC), respectively. In 1966, Tomita et al altered Abbott's technique by employing end-to-side rather than end-to-end anastomoses, thus eliminating the hind leg paralysis that sometimes resulted from Abbott's technique. In order to prevent postsuture hemorrhage (since 7-0 silk suture was the finest available at that time), Tomita's aortic anastomosis was done with double up-and-down continuous suture technique. A single layer continuous anstomosis effected the pulmonary artery-IVC anastomosis. The availability of Nylon monofilament suture made it possible for Ono and Lindsey to use a single layer suture technique for the aortic end-to-side anastomosis in their modified rat heart transplantation. We observed survival time between control group and Immunosuppression(Cyclosporine administration, 10mg/Kg${\times}$4 times postoperatively) group after heterotopic heart transplantation in the rat model. The cyclosporine adminstration group survived longer than the control group, thus we concluded that cyclosporine was based on Immunosuppressive drugs.

• 대한공업교육학회지
• /
• v.43 no.1
• /
• pp.76-93
• /
• 2018

The purpose of this study is to analyze job of management teacher of industry-academy cooperation of specialized high school using DACUM method. The contents of this study are to identify the duties, tasks and the level of importance, difficulty, frequency and entry level on each task. Finally, based on the job analysis results, the DACUM chart of management teacher of industry-academy cooperation of specialized high school was developed. The workshop for DACUM job analysis consisted of one DACUM facilitator who acquired Level-I license, eight members of DACUM who had more than five years experience, one clerk and one practitioner for two days. The results of the study are as follows. First, this study defines management teacher of industry-academy cooperation as 'a person who career teachers in charge of career guidance, NCS-based field practice, establishment of industry-academia-government relations, external business administration, industry-academia cooperation administration, teaching subject class'. Second, the job of management teacher of industry-academy cooperation were total 7 duties and 80 tasks. Third, the importance, difficulty, and frequency of each task are classified into high (A), normal (B), and low (C) according to degree. Finally, this study make out a DACUM chart of management teacher of industry-academy cooperation of specialized high school based on the results of DACUM job analysis. And knowledge, skills, tools, and positive behaviors, future trends/concerns about management teacher of industry-academy cooperation of specialized high school were presented.

• Journal of the Korean Magnetics Society
• /
• v.22 no.3
• /
• pp.109-115
• /
• 2012

NeFeB anisotropy bonded magnet has proposed a new paradigm of weight reduction of small motors by replacing the conventional ferrite permanent magnets with its high magnetic property of 25 MGOe during last five years. It has also advanced by leaps and bounds in the field of motor industry for automobiles and electric power tools. And it has led a new innovation of fifty percent weight lightening compared to its current motors by correctly focusing on fuel performance improvement through weight lightening that automobile industry chased. There was, however, another price skyrocketing in 2011 after China had announced its export regulation in rare earth materials in July, 2010. And this price change has an extensive impact on the industries that consume rare earth magnets. This environmental change has caused technical challenge to improve the performance by using least amount of rare earth elements in NdFeB anisotropy bonded magnets, and led to make a new technical approach to a new applied field. In this article, we will show how each nation deals with this industrial issue, and introduce development trend and application of anisotropic NdFeB bonded magnets, so-called MAGFINE made by Aichi Steel Corp.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.337-349
• /
• 2006

Seven hundred and fifty one fractures of the rhyolitic tuffaceous rock masses were mapped using 6 scanlines placed on rock slope exposures that were within 8.02 km of Busan-Ulsan highway. These data were analyzed to find the number of fracture sets that exist in the rock slopes and the probability distributions of orientation, spacing, trace length and fracture size in 3-D for each of the fracture sets. All the fracture set orientation distributions exhibit high variability. The Fisher distributions were found to be unsuitable to represent the statistical distribution of orientation for most of the fracture sets. The probability distributions, gamma, exponential and lognormal were found to be highly suitable to represent the distribution of spacing and semi-trace length of fracture sets. In obtain-ing these distributions, corrections were applied for sampling biases associated with spacing and trace length. The generated fracture system in 3-D was used to make predictions of fracture traces for each fracture set on 2-D win-dows. Developed stochastic 3-D fracture network for the rock mass was validated by comparing statistical proper-ties of the observed fracture traces on scanlines with the predicted fracture traces on the scanlines. This exercise fumed out to be successful.