• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.51-59
• /
• 2006

The surface wave data obtained in a tidal flat located in the sw coast of the Korean Peninsula were used to analyse the shear wave velocity structure of the area. First, the phase velocity dispersion curves were obtained by the tau-p stacking method and the group velocity dispersion curves by a wavelet transform method and the Multiple Filtering Technique by Dziewonski. The phase velocity dispersion curves exhibited bigger errors than the group velocity curves. The results showed that the wavelet transform method was more effective in separating the fundamental and the 1st higher mode group velocity curves than the Multiple Filtering Technique. Combined use of the fundamental and the 1st higher mode group velocity dispersion curves in the inversion for the shear wave velocity structure gave better spatial resolution compared when the fundamental mode group velocity was used alone. This study indicates that the group velocity dispersion curves can be used in the inversion of Rayleigh waves for the shear wave velocity structure, especially effectively with the higher mode group velocity curves together.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.108-113
• /
• 2006

Urban conditions, such as existing underground facilities and ambient noise due to cultural activity, restrict the general application of conventional geophysical techniques. At a tunnelling site in an urban area along an existing railroad, we used the refraction microtremor (REMI) technique (Louie, 2001) as an alternative way to get geotechnical information. The REMI method uses ambient noise recorded by standard refraction equipment and a linear geophone array to derive a shear-wave velocity profile. In the inversion procedure, the Rayleigh wave dispersion curve is picked from a wavefield transformation, and iteratively modelled to get the S-wave velocity structure. The REMI survey was carried out along the line of the planned railway tunnel. At this site vibrations from trains and cars provided strong seismic sources that allowed REMI to be very effective. The objective of the survey was to evaluate the rock mass rating (RMR), using shear-wave velocity information from REMI. First, the relation between uniaxial compressive strength, which is a component of the RMR, and shear-wave velocity from laboratory tests was studied to learn whether shear-wave velocity and RMR are closely related. Then Suspension PS (SPS) logging was performed in selected boreholes along the profile, in order to draw out the quantitative relation between the shear-wave velocity from SPS logging and the RMR determined from inspection of core from the same boreholes. In these tests, shear-wave velocity showed fairly good correlation with RMR. A good relation between shear-wave velocity from REMI and RMR could be obtained, so it is possible to estimate the RMR of the entire profile for use in design of the underground tunnel.

• Korean Journal of Remote Sensing
• /
• v.17 no.3
• /
• pp.199-210
• /
• 2001

The purpose of this study is to compare the landslide prediction models quantitatively using prediction rate curve. A case study from the Jangheung area was used to illustrate the methodologies. The landslide locations were detected from remote sensing data and field survey, and geospatial information related to landslide occurrences were built as a spatial database in GIS. As prediction models, joint conditional probability model and certainty factor model were applied. For cross-validation approach, landslide locations were partitioned into two groups randomly. One group was used to construct prediction models, and the other group was used to validate prediction results. From the cross-validation analysis, it is possible to compare two models to each other in this study area. It is expected that these approaches will be used effectively to compare other prediction models and to analyze the causal factors in prediction models.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.157-164
• /
• 2005

Urban conditions such as underground facilities and ambient noises due to cultural activity restrict the application of conventional geophysical techniques in general. We used the refraction microtremor (REMI) technique as an alternative way to get the geotechnical information, in particular shear-wave (S-wave) velocity information, at a site along an existing rail road. The REMI method uses ambient noises recorded using standard refraction equipment to derived shear-wave velocity information at a site. It does a wavefield transformation on the recorded wavefield to produce Rayleigh wave dispersion curve, which are then picked and modeled to get the shear-wave velocity structure. At this site the vibrations from the running trains provided strong noise sources that allowed REMI to be very effective. REMI was performed along the planned new underground rail tunnel. In addition, Suspension PS logging (SPS) were carried out at selected boreholes along the profile in order to draw out the quantitative relation between the shear wave velocity from the PS logging and the rock mass rating (RMR) determined from the inspection of the cores recovered from the same boreholes, These correlations were then used to relate the shear-wave velocity derived from REMI to RMR along the entire profile. The correlation between shear wave velocity and RMR was very good and so it was possible to estimate the RMR of the total zone of interest for the design of underground tunnel,

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.551-551
• /
• 2016

북한과의 대표적 공유하천인 임진강 유역은 유역의 2/3를 차지하고 있는 북한지역내에서 신뢰할만한 강우 및 수문관련 정보에 접근할 수 없는 문제점이 존재한다. 또한, 임진강 중류에는 북한에서 운영하는 황강댐의 예고없는 수문운영에 따라 수시로 하류 홍수피해가 발생할 수 있는 상황이며, 이에 대비하여 우리나라에는 군남 홍수조절지를 건설하여 운영하고 있다. 하지만 임진강 상류에 대한 수문정보를 취득하기 어렵기 때문에 가까운 수위관측소의 수위변화와 저류함수 모형 등을 이용하여 댐 운영을 실시하고 있는 것이 현실이다. 본 연구에서는 미계측유역에서의 수문정보를 확보하기 위한 목적으로 레이다강우 등 원격탐사정보와 분포형 강우-유출모형을 이용하여 황강댐 유입량을 산정할 수 있는 수문모형을 구축하였다. 황강댐유역의 수문모형 실매개변수를 보정하기 어렵기 때문에 인근 한탄강댐유역의 매개변수를 지역화를 통하여 전이하여 활용하였다. 산정된 수문곡선은 동시간대 한탄강댐 유입량의 면적비적용, 강수의 공간전이후 산정된 한탄강댐 유입량의 면적비적용등의 다양한 시나리오에서 모의된 수문곡선과의 비교를 수행하여 본 기법의 타당성을 입증하고자 시도하였다. 또한 군남홍수조절지 유입수문곡선과의 비교를 통하여 황강댐과 4월 5일댐의 수문운영현황 및 잔유역유입량을 역추정코자 하였다.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.210-224
• /
• 2019

Surface wave (SW) surveys, which have been applied to numerous application fields ranging from micro-scale ultrasonic analysis to geological scale analysis, are widely used to monitor near-surface stability. The survey method is basically made through analysis on dispersion of SW propagating along the earth surface, in order to delineate shear velocity structure of subsurface. SW survey data are inverted with assuming one-dimensional (1D) layered-earth in order to recover shear wave velocities of each layer, after being analyzed to make the dispersion curve that shows phase velocity of SW with respect to frequency. This study reviews surface wave surveys with explaining the basic theory including the characteristics of dispersion and the procedure of general data processing. Even though surface wave surveys can be categorized into active and passive methods, this paper focuses only on active surface wave methods which includes continuous SW (CSW), spectral analysis of SW (SASW) and multichannel analysis of SW (MASW). Passive method will be reviewed in the subsequent paper.

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.53-62
• /
• 1997

Analytical studies were conducted to develop the Spectral-Analysis-of-Surface-Waves (SASW) method for underwater use. For the precise estimation of the in-situ soil stiffness profile from SASW measurements, it is essential to determine economical and reasonable theoretical dispersion curves reflecting various experimental conditions. In this paper, therefore, analytical methods are mainly discussed, which were developed to determine theoretical dispersion curves of surface waves propagated along the soil-water interface. Application of the analytical methods is then illustrated by an example involving estimation of a stiffness profile through a forward modeling process of SASW measurements. Applicabilities of the SASW method as well as the developed analytical methods are evaluated, respectively, from the example.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.194-198
• /
• 2007

융설 모형의 중요 매개변수인 적설분포면적은 실제 우리나라에서 적설과 관련한 관측 자료의 부족으로 인해 매개변수 추정이 어렵다. 이러한 문제점 해결을 위해 원격탐사기법을 활용하여 적설분포면적을 추출하였다. 본 연구에서는 1997년부터 2006년까지의 겨울철 NOAA (National Oceanic and Atmospheric Administration)의 AVHRR(Advanced Very High Resolution Radiometer) 위성영상의 8 sets의 총 108개 영상을 이용하여 적설분포면적을 추출하였고, 기상청의 지상기상관측소의 최심적설심 자료를 이용하여 GIS 자료를 구축함으로써 적설심의 공간적 분포를 추출하였다. 이를 국내 5대유역인 한강, 낙동강, 금강, 영산강, 섬진강 유역에 대하여 융설모형의 주요 매개변수인 적설분포면적, 유역 평균, 최대 적설심과 적설분포감소비곡선을 구축하였다. 그 중 적설분포면적감소곡선 (SDC : Snow cover Depletion Curve)는 적설분포면적의 감소형태를 나타내주는 지표로써 융설의 가장 민감한 매개변수이다. 이를 국내 5대강 유역에 대해 구축하여 정량화하였다.

• Geophysics and Geophysical Exploration
• /
• v.4 no.1
• /
• pp.8-18
• /
• 2001

To delineate the inhomogeneities including fractures and to estimate the freshness of rock borehole radar consisting of the reflection and tomography methods, and GPR surveys were conducted at a granite quarry mine. The borehole reflection survey using the direction finding antenna was also conducted to get the spatial orientations of reflectors. 20 MHz was adopted as the central frequency for the borehole radar reflection and tomography surveys and 100 MHz was for GPR. Through the interpretation of borehole reflection data using dipole and direction finding antenna as well as GPR images, which are good agreement with each other, we could determine the orientation of the major fractures in three dimensional way. Parts of travel time curves of tomography data showed the anisotropy, which is uncommon in granite quarry. By comparing the tomography data and TeleViewer images, the anisotropy effect in this area are closely related to fine fissures aligned in the same direction. The area confined by the two fractures, MF2 and MF5, might consist of the most fresh granite in the surveyed area, which was concluded from the borehole radar tomography, and GPR images as well as the distribution of anisotropy.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.73-78
• /
• 2006

To verify reinforcing effect of grouting materials on the water leakage region in dike, we performed various hydraulic test and we also applied electric resistivity survey including electrical resistivity tomography(ERT) to see resistivity variation before and after grouting. As the results of dipole-dipole array survey along dike, resistivity distribution after grouting was without noticeable spatial variation. Long term resistivity monitoring results at dike with Schlumberger array electric resistivity survey showed that the decreasing region of apparent resistivity and one dimensional inversion results were the occupied region by grout after grouting. From the ERT using check holes to inspect the effect of grouting, we could find that the ERT is quite effective to evaluate spatially grout region in dike.