• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.244-246
• /
• 2000

x,y평면 위를 자유롭게 구동할 수 있는 서피스 모터(평면 모터)의 디텐트력을 3차원 유한요소 해석을 이용하여 해석한다. 고정자와 이동자를 분리하여 모델링을 하고 접하는 면을 주기 경계조건으로 처리하여 실제로 이동하지 않고도 이동을 고려할 수 있도록 하였다. 고정자와 이동자의 계수 행렬을 분리하여 영역 분할법을 적용하여 계산 시간을 단축하였다.

• KIEAE Journal
• /
• v.11 no.4
• /
• pp.11-18
• /
• 2011

In order to solve housing shortage, an apartment has been built and supplied in large quantities in Korea. As such a result, the apartment became a typical housing type in Korea. However, the housing became vulnerable to accommodate rapidly changing life-style & life-cycle of koreans and was lost the concept of Korean traditional housing for inheriting and developing Korean traditional culture. Therefore, this paper aims at eliciting of design elements for development on standard model of long-life housing with durability & flexibility based on data derived from housing consumers's questionnaire survey and expert's opinion surveys. We expect that the standard model developed on the basis of open building applying support & infill elements will be used as a standard model for planning future long-life housing with capacity.

• 대한치과보철학회:학술대회논문집
• /
• 1997.11a
• /
• pp.25-25
• /
• 1997

• 대한치과보철학회:학술대회논문집
• /
• 1998.11a
• /
• pp.44-44
• /
• 1998

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.898-910
• /
• 1995

기존경수로 핵연료의 연소도를 크게 증가시키는 고연소도 핵연료 및 미래형 핵연료에서는 연료봉의 축방향 조사성장이 증가하게 되고 이와 같이 증가된 축방향 연료봉 성장을 수용하기 위해서는 상.하단 고정체 사이의 간격이 더 필요하게 된다. 이 요구되는 상.하단고정체 사이의 축방향 공간을 얻기 위하여 기존 국산핵연료 하단고정체 유로판 및 이물질여과 하단고정체에 대하여 응력강도를 기준으로 두께최적화 계산을 수행하였다. 계산은 범용 유한요소 코드인 ANSYS 코드를 이용하였다. 이 두께 최적화에 의해 기존의 국산 17$\times$17 경수로 핵연료의 하단고정체에서는 지지 Leg의 폭과 길이를 증가시킴으로써 유로판의 두께 감소를 약 5.1mm 줄일 수 있음을 알 수 있고, DRBEP용 하단고정체에서는 약 4.6mm의 두께 감소가 가능한 것으로 해석되었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.110-119
• /
• 2016

Purpose: This study is aimed to assess changes of stress distribution dependent on different connection lengths and placement of the fixture top relative to the ridge crest. Materials and methods: The internal-conical connection implant which has a hexagonal anti-rotation index was used for FEM analysis on stress distribution in accordance with connection length of fixture-abutment. Different connection lengths of 2.5 mm, 3.5 mm, and 4.5 mm were designed respectively with the top of the fixture flush with residual ridge crest level, or 2 mm above. Therefore, a total of 6 models were made for the FEM analysis. The load was 170 N and 30-degree tilted. Results: In all cases, the maximum von Mises stress was located adjacent to the top portion of the fixture and ridge crest in the bone. The longer the connection length was, the lower the maximum von Mises stress was in the fixture, abutment, screw and bone. The reduction rate of the maximum von Mises stress depending on increased connection length was greater in the case of the fixture top at 2 mm above the ridge crest versus flush with the ridge crest. Conclusion: It was found that the longer the connection length, the lower the maximum von Mises stress appears. Furthermore, it will help prevent mechanical or biological complications of implants.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.1
• /
• pp.10-16
• /
• 2018

Purpose: The purpose of this study was to evaluate distalizing effects from the Pendulum appliance on vertical component of craniofacial structures. Materials and Methods: 20 Patients who visited for orthodontic treatments are assigned to two groups. Group I, SN-MP > 37 degrees are showing hyperdivergent pattern. Group II, 29 < SN-MP < 37 degrees are showing mesocephalic pattern. Each group are consisted of 10 people. Results and Conclusions: Differences between skeletal classifications result in significant differences at labioversion of lower incisors and distalized amount, which is larger at Group I (P <.05). Group II has only shown significant distalized molars (P < .05). Labioversion of lower incisors has not shown significant change. Skeletal anchorage-assisted Pendulum appliance doesn't deteriorate vertical component nor significantly improve.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.602-608
• /
• 2016

The paper proposes a practical meshless method for the free vibration analysis of clamped plates having arbitrary shapes by extending the non-dimensional dynamic influence function (NDIF) method, which was developed by the author in 1999. In the proposed method, the domain and boundary of the plate of interest are discretized using only nodes without elements unlike FEM and the system matrices are obtained by making domain nodes and boundary nodes satisfy the governing differential equation and boundary conditions, respectively. However, since the above system matrices are not square ones, the problem of free vibrations of clamped plates is not reduced to an algebraic eigenvalue problem. An additional theoretical treatment is considered to produce an algebraic eigenvalue problem. It is revealed from case studies that the proposed method is valid and accurate.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1186-1188
• /
• 2005

본 논문에서는 8극 12슬롯 내전형 BLDC 전동기를 기본 모델로 하고, 이를 자기저항법 및 유한요소법을 이용하여 해석 및 설계를 하고자 한다. 본 논문에서 설계대상으로 하는 내전형 BLDC 전동기는 기존에 사용중인 모델로서, 외부의 고정 전기자는 기존의 모델에 맞도록 외경을 그대로 유지하면서 Teeth 등을 설계변수로 하였고, 내부의 회전 자석계자는 기존에는 페라이트 자석을 사용하였으나 전동기의 성능 향상을 위해서 희토류 자석으로 대체하였다. 그리고 이로인한 고정자의 포화가 일어나지 않도록 최적 설계를 하였다. 유한요소법을 적용하여 자속분포, 코깅 토오크, 토오크 등을 해석하였고, 고정자와 슬롯의 최적화를 통하여 토오크 및 전동기의 성능을 향상시켰다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.10
• /
• pp.653-659
• /
• 2015

A new formulation of the non-dimensional dynamic influence function method, which is a type of the meshless method, is introduced to extract highly accurate eigenvalues of clamped plates with arbitrary shape. Originally, the final system matrix equation of the method, which was introduced by the author in 1999, does not have a form of algebraic eigenvalue problem unlike FEM. As the result, the non-dimensional dynamic influence function method requires an inefficient process to extract eigenvalues. To overcome this weak point, a new approach for clamped plates is proposed in the paper and the validity and accuracy is shown in verification examples.