• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.95-98
• /
• 2002

문자인식 또는 음성인식을 위해 사용되어지는 CHMM(Continuous Hidden Markov Model)모델은 일반적으로 모델의 상태수를 일정한 수로 고정하는 고정 상태수 모델 구조를 가지고 있으나, 이는 개별적인 인식 단위의 특성을 고려하지 않은 경우로써 이를 고려한 가변 상태수 모델을 사용할 경우 인식률 향상을 기대할 수 있다. 개별적인 인식 단위에 적합한 모델 상태수를 결정하는 방법으로 파라미터 히스토그램 방법과, BIC(Bayesian Information Criterion)방법을 사용하는 것이 대표적이다. 이들 방법들은 개별적인 인식단위의 우도값만을 향상시키기 위한 방법으로 전체인식률과 직접적으로 비례하지는 않는다. 따라서, 본 논문에서는 고정 상태수를 갖는 모델 적용 방법과 인식단위별 상태수 변화에 따른 인식률을 비교하였으며, 이를 바탕으로 각 모델별 상태수를 달리하는 가변 상태수 CHMM모델 구성 방법을 제안한다. 제안된 가변상태수 모델의 유효성을 확인하기 위해 음성/문자 공용인식기 중 필기체 문자 인식에 적용한 결과 제안한 LM(Local Maximum)으로 구성된 가변 상태수 모델이 MLE와 BIC로 구성된 모델과 인식률 면에서는 거의 동일한 성능을 유지하면서 전체 상태수는 MLE 모델에 비해 $31\%$, BIC로 구성된 모델에 비해 $22\%$ 감소를 나타내어 제안한 모델의 유효성을 확인할 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.93-95
• /
• 2010

기존의 비디오 부호화 표준에서는 참조영상을 보간하여 해상도를 증가시킨 후, 고정된 움직임 벡터 해상도로 영상 전체를 부호화 한다. 참조 영상의 해상도를 증가시킨 만큼 움직임 보상에 의하여 예측에러가 줄어들지만, 움직임 벡터 해상도가 증가한 만큼 움직임 벡터의 부호화 비트량이 증가한다. 고정된 해상도의 움직임 벡터로 부호화하는 경우, 영상의 지역적인 움직임 특성이 다른 경우 부호화 효율이 떨어질 수 있다. 따라서 본 논문에서는 기존의 비디오 부호화 표준들이 영상의 지역적인 특성을 고려하지 않고 고정된 해상도의 움직임 벡터를 사용하여 부호화하는 문제점을 극복하기 위하여 슬라이스 단위로 1/4 화소 해상도 또는 1/8 화소 해상도 또는 움직임 벡터 단위로 적응적으로 화소 해상도를 결정하는 것 중에서 최적의 슬라이스 움직임 벡터 해상도를 결정하여 부호화하는 방법을 제안한다. 제안한 방법을 사용하여 부호화하면 움직임 벡터의 부호화 비트의 낭비를 막고, 예측 에러도 줄어들어 부호화 효율을 높일 수 있다. 제안하는 방법을 사용하여 부호화 하는 경우 H.264/AVC와 비교하여 평균 1.97%의 BD-RATE을 감소한다.

• School Mathematics
• /
• v.18 no.3
• /
• pp.625-645
• /
• 2016

This study clarified the big ideas related to teaching addition and subtraction of fractions with different denominators based on quantitative reasoning with unit and recursive partitioning. An analysis of this study urged us to re-consider the content related to the addition and subtraction of fraction. As such, this study analyzed textbooks and teachers' manuals developed from the fourth national mathematics curriculum to the most recent 2009 curriculum. In addition and subtraction of fractions with different denominators, it must be emphasized the followings: three-levels unit structure, fixed whole unit, necessity of common measure and recursive partitioning. An analysis of this study showed that textbooks and teachers' manuals dealt with the fact of maintaining a fixed whole unit only as being implicit. The textbooks described the reason why we need to create a common denominator in connection with the addition of similar fractions. The textbooks displayed a common denominator numerically rather than using a recursive partitioning method. Given this, it is difficult for students to connect the models and algorithms. Building on these results, this study is expected to suggest specific implications which may be taken into account in developing new instructional materials in process.

• Journal of Educational Research in Mathematics
• /
• v.27 no.3
• /
• pp.537-555
• /
• 2017

This paper compared and contrasted Korean and Singaporean textbooks in order to explore the direction and possibility of teaching the big ideas related to the addition and subtraction of fractions with different denominators proposed by Lee & Pang (2016a). Firstly, we examined the teaching sequences related to the addition of fractions with different denominators in a series of elementary mathematics textbooks of Korea and Singapore. We then analyzed what types of representations are used and how the representations are presented for the big ideas related to the addition of fractions with different denominators. The results of the analysis showed that the contents related to fraction addition are addressed more gradually and systematically in Singaporean textbooks compared to Korean counterparts. The graphical representations appeared in the Singaporean textbooks provide specific implications for teaching the big ideas of the addition of fractions with different denominators. Based on such implications, we expect that the big ideas related to the addition of fractions with different denominators will be addressed explicitly and systematically in Korean textbooks.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.50-54
• /
• 2006

Biomass expansion factors and stem density values were commonly used in converting stand volumes into total carbon stocks for the purpose of national inventories of greenhouse gas emissions and carbon sequestration. The objective of this study was to examine the influence of stand age classes on aboveground and total biomass expansion factors, and stem density values in Chamaecyparis obtusa species. A total of 25 representative sample trees based on the three different stand age classes were destructively sampled to measure green weights and dry weights of the major four(root, stem, branch and foliage) portions of C. obtusa species grown in Jangseung-gun of southern Korea. According to the results of this study, as stand age classes increase, total biomass expansion factors tended to be decreased with the ranges from 3.64 to 1.44, while the stem density values tended to be slightly increased with the ranges from $0.35(g/cm^3)$ to $0.44(g/cm^3)$. There were statistically significant differences in biomass expansion factors and stem density values between stand age classes, but became nearly constant after 30 years old for C. obtusa species. This information could be very useful to improve a national-scaled inventory of greenhouse gas emissions and carbon sequestration for the C. obtusa species by applying different biomass expansion factors and stem density values.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.165-174
• /
• 2010

The H.264/AVC standard obtained better performance than previous compression standards, but it also increased the computational complexity of CODEC simultaneously. Various techniques recently included at the KTA software developed by VCEG also were increasing its complexity. Especially adaptive interpolation filter has more complexity than two times due to development for coding efficiency. In this paper, we propose low-complexity filter bank to improve speed up of decoding and coding gain. We consists of filter bank of a fixed-simple filter for low-complexity and adaptive interpolation filter for high coding efficiency. Then we compensated using optimal filter at each macroblock-level or frame-level. Experimental results shows a similar coding efficiency compared to existing adaptive interpolation filter and decoding speed of approximately 12% of the entire decoder gained.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1011-1015
• /
• 2010

하천의 이용과 관리적 측면에서 가장 빈번하게 발생하는 하도의 직선화, 홍수량의 변화, 하상굴착, 하폭의 확대 축소 및 횡단구조물 등은 중규모 스케일의 하천지형을 인위적으로 교란시키는 대표적인 사례이다. 따라서, 이러한 인위적 교란은 하천생태계의 기반인 하천의 물리적 구조를 크게 변화시키므로 하도지형의 응답방향을 규명할 필요가 있다. 하천 유역의 지형은 여러 가지 스케일의 지형단위가 조직화되어 있는 것이므로 대(大) 중(中) 소(小)의 3가지 스케일 지형단위로서 계(系, system)를 계층화하고, 작은 계층의 계(系)에서는 큰 계층의 계(系)를 고정적인 경계조건으로 하여, 그 내부의 여러 가지 특징이나 변화를 규정하는 주요 인자를 이용하여 분석해야 한다. 또한 대(大) 스케일은 유역스케일의 지형스케일이며, 하도의 수계망이나 하도종단형 형상 등이다. 중(中) 스케일은 segment에서 reach 스케일의 지형이며 사행형상, 하천 폭 등이다. 소(小)스케일은 수심의 10배 정도이하의 지형스케일이며, 소규모 하상파 등의 미지형(微地形)이다. 따라서, 본 연구에서는 남강과 황강을 대상하천으로 유량 조절과 유사공급이 차단되는 댐하류 및 골재채취와 같은 인위적 교란요인에 의한 중규모(segment scale) 하도지형의 변화와 응답방향을 조사, 분석하였다. 연구결과 유량 및 유사공급량의 변동의 크기에 따라 전체적인 하상저하와 더불어 사주와 소가 소멸되면서 여울과 소가 사라지는 현상이 동조하는 것으로 분석되었으며, 하상의 평탄화에 의하여 저수로의 폭이 넓어져 복열사주가 발달하면서 수심 및 유속의 다양성이 감소되는 것으로 분석되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.75-80
• /
• 2019

In the recent aerospace and defence industries, it is required to develop small and low cost embedded systems. Based on a high speed digital signal processor (DSP), this paper first presents the development of an embedded system. To reduce the computation time of the high precision algorithm such as flight control, we also propose two algorithms for matrix multiplication. Validation results show that, compared to the performance using the $2{\times}2$ unit method, the performance of the proposed method 1 is improved, when the size of matrices is small. The proposed method 2 generally outperforms the $2{\times}2$ unit method.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.303-310
• /
• 2020

The purpose of this study was to verify the relationship between students' exercise ability beliefs, academic engagement and self-handicap in physical education class. To this end, this study selected a total of 437 copies of questionnaires as final valid samples using the convenience sampling method targeting middle school students at 4 schools in metropolitan area. For data processing, this study confirmed the goodness of fit test of the whole model using SPSS 20.0 and AMOS 20.0, and then did hypothesis testing; the study results are as follows: First, the increased belief of exercise ability beliefs was shown to have a static effect on the academic engagement, and a fixed belief did not have a significant effect on the academic engagement. Second, the increased belief was shown to have no significant effect on self-handicap, while the fixed belief had a static and significant effect on self-handicap. Third, the students' academic engagement has been confirmed to have a negative effect on self-handicap.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.62-70
• /
• 2013

Electric arc furnace slag is made in ironworks during steel refining, it is been increasing chemical and physical resistibility using ageing method of unstable state of melting steel slag for using concrete's fine aggregates. Which is been changing stable molecular structure of aggregates, it restrains moving of ion and molecule. In Korea, KS F 4571 has been prepared for using the electric arc furnace slag to concrete aggregates. In this study, Electric arc furnace slag is used in the PMC(Polymer Modified Concrete) which is applied a bridge pavement of rehabilitation, largely. In that case, this study evaluates the structural safety about increasing the specific weight. The 4-type bridges(RC slab bridge, RC rigid-frame bridge, PSC Beam bridge, Steel box girder bridge) pavement's increasing the total dead load is in 1 ~ 2%. Design moments in a load combination are increased less then 2%. safety factor is decreased less than 3%. Therefore, the structural safety has no problem for applying the electric arc furnace slag within PMC in bridge.