• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.529-532
• /
• 2008

Manna is a new japonica rice cultivar developed from the cross between Iksan438 and Ilmibyeo by the rice breeding team of Department of Rice and Winter Cereal Crop, RDA, in 2005. This cultivar has a short grain shape and about 97 days growth duration from late transplanting to harvesting under Korean climatic conditions. It is resistant to lodging with average 70 cm of culm length. The milled kernels of Manna are translucent with non-glutinous endosperm. It has about 19% amylose content and good palatability of cooked rice compared with Geumobyeo. This cultivar shows resistance to leaf blast and neck blast but susceptibility to bacterial blight and stripe virus diseases. The milled rice yield potential of Manna is about 5.05 MT/ha under the late transplanting cultivation. Manna would be adaptable for the middle and Honam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.252-256
• /
• 2010

'Honong' is a new japonica rice variety developed and registered by the rice breeding team of Department of Rice and Winter Cereal Crop, NICS, RDA in 2009. This variety was derived from mutagen MNU (N-methyl-N-nitrosourea) treatment on fertilized egg cells of Unbong31. This variety has about 126 days growth duration from transplanting to harvesting in west-southern coast, Honam and Youngnam plain of Korea. It has 79 cm in culm length and is tolerant to lodging. In reaction to biotic and abiotic stresses, it show resistance to blast, bacterial blight pathogen races from $K_1$ to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled rice of 'Honong' exhibits translucent, relatively clear non-glutinous endosperm and medium short grain. It has higher amylose content (20.3%) and lower protein content (6.3%), and good palatability of cooked rice compared with Nampyeong. The milled rice yield performance of this variety is about 5.44MT/ha in local adaptability test for three years. 'Honong' would be adaptable to west-southern coast, Honam and Youngnam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.272-275
• /
• 2010

'Geumyoung' is a new early maturing rice cultivar developed from the cross between Sambaegbyeo and Iksan423/Sangju22 at Sangju Substation, NICS, RDA, Korea in 2009. It needs about 116 days from seedling to harvest in mid-mountainous areas. This cultivar has about 72 cm long culm and 19 cm long panicle, which are similar to Odaebyeo. It has higher panicle number per plant, medium to small grains and sometimes has a few awned spikelets. It shows tolerance to cold and resistance to blast but is susceptible to bacterial blight, virus diseases, and insects and pests. Milled rice of 'Geumyoeng' is translucent with non-glutinous endosperm and medium short grain. It has about 18.0% amylose and 6.6% protein content with good palatability of cooked rice. The milled rice yield of this cultivar was 5.53 MT/ha under standard fertilizer level of ordinary transplanting cultivation. 'Geumyong' would be adaptable for ordinary transplanting cultivation in the northern plains, and northern and southern mid-mountainous areas of South Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.2
• /
• pp.169-180
• /
• 2010

This study was conducted to investigate characteristics of panicle traits which are important factors affecting yield and grain quality of rice. Twelve panicle traits in 178 Korean rice varieties composed of 160 Japonica type varieties and 18 Tongil type varieties were investigated. Tongil type varieties had longer panicle and thicker neck node than Japonica type varieties. Other traits such as number of total spikelets, total rachis-branches, secondary rachis-branches (SRBs) per panicle, total spikelets on SRBs per panicle, mean number of spikelets on a SRB, and mean number of SRBs per primary rachis branch (PRB) in Tongil type varieties were also higher than in Japonica type varieties. On the other hand, Japonica type varieties were shown to have well exserted panicle and little more mean number of spikelets on a PRB than Tongil type varieties. According to cluster analysis based on 12 panicle traits, 178 varieties were divided into four main groups. Group I had 133 Japonica type varieties and was characterized by relatively well exserted short panicle, small thickness of neck node, few rachis-branches and little sink size than other group. Group II was composed of 24 Japonica type varieties and 6 Tongil type varieties showing medium value and range between Group I and III. Group III included 11 Tongil type varieties and 1 Japonica type variety 'Baegjinju1' characterized by relatively poor exserted long panicle, big thickness of neck node, many rachis-branches and large sink size. Group IV was solely composed of 'Nongan', which had well exserted long panicle, big thickness of neck node, many rachis-branches and large-sink size. In correlation analysis, number of total spikelets per panicle showed very high correlation with the number of total rachis-branches per panicle (r=0.975), number of spikelets on SRBs per panicle (0.962), number of SRBs per panicle (0.959), mean number of SRBs per PRB (0.746) and mean number of spikelets on SRBs (0.738).

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.188-191
• /
• 2008

'Hwangkeumnuri' is a japonica rice variety developed and registered by the rice breeding team of Honam Agricultural Research Institute, NICS, RDA in 2006. This variety was derived from a cross between 'Milyang 165' (Junambyeo) with good quality and high yield and HR14732-B-67-2-3 with multi-disease resistance. This variety has about 125 days growth duration from transplanting to harvesting in west-southern coast, Honam and Youngnam plain of Korea. It is about 76 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows resistance to blast, bacterial blight pathogen from $K_1$ to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled rice of 'Hwangkeumnuri' exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has similar amylose content of 18.9% and lower protein content of 6.2%, and good palatability of cooked rice compared with 'Nampyeongbyeo'. The milled rice yield performance of this variety is about 5.74 MT/ha in local adaptability test for three years. 'Hwangkeumnuri' would be adaptable to west-southern coast, Honam and Yeongnam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.533-536
• /
• 2008

Hopum is a new japonica rice cultivar developed from the cross between Milyang165 and F1 crossing Milyang165 and Iksan438 at Department of Rice and Winter Cereal Crop, NICS, RDA, in 2006. This cultivar has a short grain shape and about 141 days growth duration from direct seeding to harvesting in the southern plain including Chungcheong province. This cultivar has short culm and spikelet number per panicle is similar to that of Nampyeongbyeo, while filled grain rate is lower than standard variety. This cultivar has medium size of brown rice and shows moderate resistance to leaf blast, to bacterial blight pathogens of $K_1$, $K_2$ and $K_3$ and stripe virus disease but susceptible to major virus diseases and insect pests. The milled kernel of Hopum is translucent with non-glutinous endosperm. Protein and amylose content of Hopum is about 6.5% and 18.7%, respectively. This cultivar has better palatability of cooked rice than Chucheongbyeo harvested in Gyeongki province. Its milling recovery (76.8%) and percentage of perfect-shaped milled rice (94.7%) were higher than Nampyeongbyeo. The milled rice yield of Hopum was 5.83 MT/ha (15% higher than Juan) under wet-direct seeding, 5.66 MT/ha (8% higher than Juan) under dry-direct seeding, and 6.00 MT/ha (8% higher than Nampyeong) under ordinary transplanting cultivation. "Hopum" would be adaptable for ordinary transplanting and direct seeding in the southern plain including Chungcheong province.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.415-426
• /
• 2021

Purpose: The purpose of this study is to create the deveopment plan for promotion of advanced disaster-safety awareness, which is noted as a major factor in the large disaster. Method: This study is to conduct theoretical review with regard to disaster management and safety awareness. Consciousness surveys on safety awareness and previous disaster case was analyzed to derive the cause of the disaster, and the development plan for promotion of advanced disaster-safety awareness was suggested. Result: In the survey on the public's sense of safety on the disaster management evaluation, 'Response' stage was well performed, but the 'Recovery' stage was not. Especially, it was found that disaster safety education at the 'Prevention' stage was very lacking. In the survey on the public's safety awareness, the awareness level of the evacuation facility was very low, information on infectious diseases and collapse accident was insufficient. Especially, it has been found that the awareness on safety regulation in daily life is very insufficient. Through the case study on previous disaster(COVID-19, Fire in Miryang Sejong Hospital, Forest fire in the east coas at 2004'), it was derived that the lack of safety awareness(such as safety insensitivity) was the main factor of the expansion of the damage scale. Conclusion: The development plan for promotion of advanced disaster-safety awareness are as follow. First, it is necessary to spread the safety culture movement through the expansion of safety education and safety promotion. Second, disaster confrontation training for the public should be implemented to improve the effectiveness of disaster response. Finally, it is necessary to change the individual awareness on safety. When these factors are implemented systematically, advanced disaster-safety awareness can be promoted. Ultimately, disaster accidents in our society can be reduced.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.10-24
• /
• 2021

Purpose: The purpose of this study is to determine the dangers of biodiesel and general diesel mixtures currently used as alternative fuels by equipment (tag method and penski Marten method) and to determine the difference between flash point and combustion point (closed, open) according to test methods. It is intended to be used as a reference material for identification and evaluation of firecausing substances by confirming the risk of mixtures by comparative analysis and measurement, and establishing a risk assessment method for chemical substances. Method: Flash point test method and result treatment were tested based on ASTM and KS M mode, which are tag sealing and pen schematense test methods used as flash point and combustion point test methods for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was a test equipment that satisfies the test standards of KS M 2010 with equipment produced by TANAKA of Japan. The flash point and combustion point were measured, and the flash point according to the test method of biodiesel and general diesel mixture ( Closed, open), and the ignition point of a mixture of biodiesel and general diesel was compared and analyzed for ignition risk compared with conventional diesel. Results: Looking at the experimental results, first, as an analysis of the risk of flammability of the mixture, the flash point of a substance containing 70% biodiesel was found to be about 92℃ based on general diesel with a flash point of 64.5℃, and gasoline and biodiesel or When the biodiesel mixture was synthesized, it was confirmed that the flash point tends to decrease. In addition, the difference between the flash point and the combustion point was analyzed as about 20 ~ 30℃, and when a small amount of gasoline or methanol was mixed, the flash point was lowered, but it was confirmed that the combustion point was similar to that of the existing mixture. Conclusion: In this study, in order to secure the effectiveness of the details of the criteria for judging dangerous materials in the existing Dangerous Materials Safety Management Act, and to secure the reliability and reproducibility of the judgment of dangerous materials, we confirm the criteria for judging the risk of the mixture through an experimental study on flammable mixtures. It will be able to provide reference data for experimental criteria for flammable liquids that are regulated in the field. In addition, if this study accumulates know-how on experiment by test method, it is expected that it can be used as a basis for research on risk assessment and research on dangerous goods.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.319-327
• /
• 2020

Particulate matters (PM) are small particulate pollution that decrease the function of skin barrier, which causes inflammatory skin diseases and extrinsic aging. In this study, we evaluated the effect of preventing the adherence of PMs from several cosmetic products applied to human skin using iron oxide black. The PM floating chamber consists of skin exposure area, PM inlet, floating power device, and an outlet so that PM can be naturally attached to the skin while floating in the chamber. The change in skin brightness according to the floating concentration of alternative fine dust was checked to confirm the optimal floating concentration conditions. The intensity difference (before-after intensity, Δ) before and after adhesion of iron oxide black was proportional to the amount of PM adhered. The anti-adherence effect of iron oxide black on five cosmetic products were evaluated through 20 each subjects by comparing the amount of iron oxide black adhered on the control and treatment. The difference in brightness before and after the iron oxide black attached to the skin was calculated and compared with the control group(p < 0.05). When over 150 mg of iron oxide black was adhered on the skin, the interference of intensity was low and clearly showed the skin adhered pattern. According to the application of the five cosmetics, the intensity difference was significantly lower than the control group. This means that depending on the product, it prevented the attachment of iron oxide black. This study is a safe and useful method to confirm the prevention of PM skin adherence. In conclusion, cosmetics can prevent the adherence of PM on the skin according to the formulation or ingredients characteristics.