• 한국ITS학회:학술대회논문집
• /
• v.2007 no.10
• /
• pp.196-201
• /
• 2007

현재 국내 ITS는 현장장비 유지관리에 대한 연구 및 고장관련 DB가 부족하여 예비부품수 및 교체시기 산정에 대한 규정이 없는 실정이다. 이에 본 연구는 실제 고장이력자료를 갖고 신뢰성 분석을 실시하여 단거리전용통신(DSRC)방식 노변기지국(RSE)의 예비부품수 및 교체시기를 산정하였다. 전체 수집기간동안의 고장자료는 욕조곡선의 형상을 나타내어 우발고장기간의 자료로 신뢰성 분석을 실시하였으나 고장 수명 분포 중 적합되는 분포가 없었다. 따라서, i)장비가동률과 ii)경험적(empirical) 누적분포함수(CDF) 곡선을 이용한 장비의 고장률(건/일)을 감안하여 예비부품수를 산정한 결과 16.22개 이상의 노변기지국(완제품)을 확보하여야 하는 것으로 분석되었다. 하자보수기간(2년)이 지난후 일정기간($2{\sim}3$년)이 지난 시점에서 향후 10년간에 대하여 수리하면서 사용하는 경우와 신품구입시의 총비용을 비교하여 산정한 교체시기는 10.67건/40개월 이상이다. 본 연구 수행결과 첫째, 비모수적 방법으로 적합도 검정을 실시하지 못하였다는 한계와, 둘째, 초기에 고장이 많이 발생하는 장비는 향후에도 고장이 많이 발생한다는 가정에 기반하여 향후 10년의 운영비용을 분석하였으나 이러한 가정을 입증하지는 못하였다. 따라서, 향후엔 본 연구에 사용된 자료가 고장 수명분포도 적합 되지 않은 원인을 분석하는 것과 분석대상 기간 이후의 자료를 추가하여 적합도 검정 및 신뢰성 분석을 실시하는 것이 필요하다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.2
• /
• pp.47-58
• /
• 2009

In this study, a seismic fragility analysis was performed for substation systems in Korea. To evaluate the seismic fragility function of the substation systems, a fragility analysis of the individual equipment and facilities of the substation systems was first performed, and then all systems were considered in the fragility analysis of the substation systems using a fault-tree method. For this research, the status of the substation systems in Korea was investigated for the classification of the substation systems. Following the classification of the substation systems, target equipment was selected based on previous damage records in earthquake hazards. The substation systems were classified as 765kV, 345kV, and 154kV systems. Transformer and bushing were chosen as target equipment. The failure modes and criteria for transformer and bushing were decided, and fragility analysis performed. Finally, the fragility functions of substation system were evaluated using the fault tree method according to damage status.

• Journal of Korean Society for Quality Management
• /
• v.11 no.2
• /
• pp.32-36
• /
• 1983

2-Unit systems such as series, parallel, standby with two types of failures are considered. Closed form solutions for both the steady-state and time-dependent availability of 2-Unit system with two types of failures are developed.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.171-179
• /
• 2003

In this paper a neural network-based fault tolerant control system for aircraft sensor and actuator failures is considered. By exploiting flight dynamic relations a set of neural networks is constructed to detect sensor failure and give alternative signal for the faulty sensor. For actuator failures another set of neural networks is designed to perform fault detection, identification, and accomodation which returns the aircraft to a new stable trim. Integrated system is simulated to show the performance of the system with sensor and control surface failures.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.32-40
• /
• 1999

The analysis of logic function is performed by the spectral coefficients which transform the function domain data into the spectral domain data. By using the spectral techniques, analysis of MVL circuits is performaed, and the fault analysis and detecting methods of multiple-valued logic circuits are proposed in this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.55-62
• /
• 2006

For the fault diagnosis of three-phase induction motors, we construct a experimental unit and then develop a diagnosis algorithm based on pattern recognition. The experimental unit consists of machinery module for induction motor drive and data acquisition module to obtain the fault signal. As the first step for diagnosis procedure, preprocessing is performed to make the acquired current simplified and normalized. To simplify the data, three-phase current is transformed into the magnitude of Concordia vector. As the next step, feature extraction is performed by kernel principal component analysis(KPCA) and linear discriminant analysis(LDA). Finally, we used the classifier based on radial basis function(RBF) network. To show the effectiveness, the proposed diagnostic system has been intensively tested with the various data acquired under different electrical and mechanical faults with varying load.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.878-882
• /
• 2004

In this paper, we propose a hierarchical hybrid neural network for detecting faults of induction motor. Implementing the classifier based on the input and output data, we apply appropriate transform and classification method at each step. In the proposed method, after obtaining the current of state of motor for each period, we transform it by Principle Component Analysis(PCA) to reduce its dimension. Before the training process, we use the conditional Fuzzy C-means(FCM) for obtaining the initial parameters of neural network for more effective learning procedure. From the various simulations, we find that the proposed method shows better performance to detect and diagnosis of induction motor and compare than other methods.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.142-144
• /
• 2002

전력계통망의 부하 구성에서 발생되는 갑작스런 변화는 계통의 부하 중심 사이에 전력 동요를 일으키게 되는데 계전기가 설치된 점에서 전압, 전류, 임피던스, 유효. 무효전력의 측정되는 전기량은 위상각 ${\delta}$의 함수로 변화한다. 그러한 조건에서 거리계전기의 오동작을 방지하기 위해 계통동요 방지 장치가 자주 이용된다. 종래의 계통동요 방지 장치는 이러한 전기량의 변화로 응동 되었다. 그러나 이런 방법은 빠른 계통 동요에 대처하지 못하고, 고저항 지락 같은 고장에는 장시간지연을 피할 수 없게 된다. 본 논문에서는 계통 동요시 여러고장 식별을 위해 계전기에 직교웨이브렛(WT)을 도입하여 동요시 고장을 구별하는 방법을 제시한다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.372-379
• /
• 2017

Software reliability factor during the software development process is elementary. Case of the infinite failure NHPP for identifying software failure, the occurrence rates per fault (hazard function) have the characteristic point that is constant, increases and decreases. In this paper, we propose a reliability model using the chi - square distribution which depends on the degree of freedom that represents the application efficiency of software reliability. Algorithm to estimate the parameters used to the maximum likelihood estimator and bisection method, a model selection based on the mean square error (MSE) and coefficient of determination($R^2$), for the sake of the efficient model, were employed. For the reliability model using the proposed degree of freedom of the chi - square distribution, the failure analysis using the actual failure interval data was applied. Fault data analysis is compared with the intensity function using the degree of freedom of the chi - square distribution. For the insurance about the reliability of a data, the Laplace trend test was employed. In this study, the chi-square distribution model depends on the degree of freedom, is also efficient about reliability because have the coefficient of determination is 90% or more, in the ground of the basic model, can used as a applied model. From this paper, the software development designer must be applied life distribution by the applied basic knowledge of the software to confirm failure modes which may be applied.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.33-36
• /
• 2016

The investigation on the verification of availability simulation for small-scale plant has been carried out. This study focuses on the availability variation induced by number of equipment and iteration with failure density function. The equipment classification of small-scale plant and failure type and the methodologies on Monte-Carlo simulation are established. The availability deviation with programs showed under Max. 1.7% for the case of normal function. This method could be used to availability evaluation of small-scale plant, but calibration of the failure density function is necessary for general application.