• Journal of the Korean Data and Information Science Society
• /
• v.21 no.4
• /
• pp.621-628
• /
• 2010

Quality assurance data is used to develop the strategy of the product since it is valuable for reliability assessment of the product. However, manufacturers don't take into account the life of the product but just produce WCR (Warranty Call Rate) which is monthly or quarterly claims per 1000 products in terms of table or graph. In this study we will consider how they analyse that kind of data and suggest an appropriate type of analysis which incorporates the life time of the product. Finally we emphasize that the appropriate type of analysis has to be merged into the.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.78-89
• /
• 2022

The purpose of this study was to propose useful suggestion by analyzing preventive replacement policy under which there are minor and major failure. Here, major failure is defined as the failure of system which causes the system to stop working, however, the minor failure is defined as the situation in which the system is working but there exists inconvenience for the user to experience the degradation of performance. For this purpose, we formulated an expected cost rate as a function of periodic replacement time and the number of system update cycles. Then, using the probability and differentiation theory, we analyzed the cost rate function to find the optimal points for periodic replacement time and the number of system update cycles. Also, we present a numerical example to show how to apply our model to the real and practical situation in which even under the minor failure, the user of system is not willing to replace or repair the system immediately, instead he/she is willing to defer the repair or replacement until the periodic or preventive replacement time. Optimal preventive replacement timing using two variables, which are periodic replacement time and the number of system update cycles, is provided and the effects of those variables on the cost are analyzed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.23-24
• /
• 2021

Among the failure cases of the existing navigation aids, the SW and operating system errors of the RTU, the embedded computer for navigation aids, account for about 10%. The causes of SW errors have an infinite number of cases, and it is impossible to correct them all. In this paper, we proposed a paravirtualized multi-OS Docker container utilization technique as a stable operation technique for smart navigational aids, which have recently increased the amount of computation and complexity of SW services that need to be managed. It is proposed to divide containers according to service type, expected load, and error frequency and load the service.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.27-35
• /
• 2015

Laser welding sector in the automotive industry has been widely recognized as one of the most important bonding processes, such as parts welding. Efforts to improve productivity and weld quality have been progressing steadily. In addition, laser welding is suitable for welding process that can produce high-quality welds suitable for flexible production and small quantity batch productions. In order to ensure the rigidity of the material, high strength material are applied to more than 1 GPa class body parts and automotive bumper beams. However, not only the situation is that the trend of domestic research, but also development is based on product molding considering freedom of shape where reinforcement is applied to meet the safety regulations and high-speed crash performance, despite the use of high strength materials. The tendency for heat-affected zone (HAZ) softening phenomenon common in areas of laser welded high tensile steel welding confirmed the occurrence of weld softening effect according to the process parameters. Based on this, range of process parameters could be selected for ensuring weld quality.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.335-342
• /
• 2018

Various technologies to cope with the energy and environmental issues related to the chemical and electric power industry are in development and demonstration stage. Especially, the absorption process of carbon dioxide ($CO_2$) using amine solution is a key technology of the $CO_2$ capture and storage (CCS). In this study, we identify the major risk factors and suggest strategies for safety improvement by analyzing and assessing commercial the amine-based $CO_2$ separation process. HAZOP method was used to assess the risk for the process. We provide facilities and operational strategies to mitigate or eliminate major risk factors by assessing the relative ranks of identified risk factors using a risk matrix.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.296-304
• /
• 1995

환경시험의 일부인 진동시험은 그 결과를 가지고 장비가 실제 운용하기 전에 진동에 대한 내구성이 있는가를 판단할 수 있는 단 하나의 방법이다. 이런 진동시험을 성공적으로 이끌어 정확한 결론에 도달하기 위해서는 아래 두 가지 문제에 대한 해결이 필수적이라고 생각한다. 첫번째는 '실제 상황을 정확히 반영할 수 있는 진동시험수준의 결정이다.' 진동시험수준이 적절하지 못하면 전체적으로나 부분적으로 과대진동시험(Overtest)을 실시하거나, 과소진동시험(Undertest)을 실시할 수 밖에 없고, 이에 따른 결과도 신뢰도가 떨어진다. 예를 들어, 과대진동시험으로 시험장비가 고장나거나, 과소진동시험으로 시험장비에 이상이 없다고 해서 실제 상황에서 이 장비가 진동에 대하여 만족할 만한 내구성을 갖는다고 누구도 말할 수 없기 때문이다. 두번째는 '정해진 진동시험수준을 진동시험기로부터 시험장비에 얼마나 정확히 전달할 수 있는가?'라는 문제이다. 실제로 원하는 진동시험수준을 한치의 오차없이 정확히 시험장비에 가하는 것은 거의 불가능하다. 특히 시험장비가 대형화 되면 될수록 문제는 더 심각하다. 결론적으로 위에 지적한 두가지 문제의 해결이 성공적인 진동시험의 열쇠이며, 또한 시험결과에 대한 신뢰성을 보장받을 수 있는 길이기 때문이다. 이번 논문에서 다루고자 하는 것은 두번째 문제인 진동시험수준의 정확한 전달을 위하여 진동시험기와 시험장비 사이를 연결해 주는 진동시험치구(Test Fixture) 개발에 관한 것이다. 실제 개발한 치구는 미군사규격(Military-Standard)과 보잉사 규격(Boeing specification) 그리고 샌디아사 규격(Sandia Corporation Standard)에 근거하여 분류하는 분류기준표에서 치구 중 가장 큰 부류(500 pounds 이상)에 속는 것으로, 현재 우리나라에서 보유하고 있는 것 중에 용량이 가장 큰 진동시험기에서 진동시험을 준비하고 있는, 체계에 전원을 공급하는 대형장비의 치구이다. 또한 실 진동시험을 실시하기 전의 모달시험과 예비시험 그리고 실 시험결과를 기술하므로써 제작된 치구의 실험적 평가를 하고자 한다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2019

An extremely small size multi-loop phase-locked loop(PLL) keeping phase noise performances has been proposed. It has been designed to have the loop filter made of small single capacitor with multiple Frequency Voltage Converters (FVCs) because the main goal is to make the size of the proposed PLL extremely small. Multiple FVCs which are connected to voltage controlled oscillator(VCO) make multiple negative feedback loops in PLL. Those multiple negative feedback loops enable the PLL with the loop filter made of an extremely small size single capacitor operate stably. It has been designed with a 1.8V $0.18{\mu}m$ CMOS process. The simulation results show that the proposed PLL has the 1.6ps jitter and $10{\mu}s$ locking time.

• The Journal of Engineering Research
• /
• v.5 no.1
• /
• pp.17-35
• /
• 2004

Svg(Scalable Vector Graphics) is xml graphic standard recommended by E3C as a language based on xml to express two-dimension graphic. Svg can accommodate all Xml's patency and advantage of interoperability, and can used as various web applications being combined with other xml language. In addition, Svg can be applied to the fields of electronic commerce, geographical information, computer education and advertisement because it can produce high quality of dynamic from real-time data. SVG's application can be enhanced by linking with database. In this paper, we discuss how Svg can be utilized in theater reservation system, not just explaining svg's meaning or ability. Svg added graphic advantage in addition to xml's advantage. This means that svg retains not only graphic element but also xml's softness. It becomes easier to designate seats and add them. Current reservation system provided in general only information on time and price for a ticket, but the system using SVG in this paper provides additional information on position, price, cancellation and purchase availability of seat.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.111-117
• /
• 2023

Sampling inspection methods for quality control have been proposed a lot in the industry. However, the sampling inspection method for reliability, which is a quality over time, has been relatively less presented, and there are not many literatures that are clearly summarized. Therefore, this paper focuses on the reliability conformity test to verify that the reliability evaluation scale value of the target is satisfied during the reliability test. To this end, first, we look at the conditions that both consumers and producers can satisfy in terms of the OC curve and find out what sampling methods satisfy the desired level of producer risk and consumer risk. Next, two methods of the reliability sampling methods such as attribute and variable reliability sampling methods are examined. Specifically, the attribute reliability sampling method is a form of sampling plan where n samples are tested for a certain period of T hours and the lot is accepted if the number of failures is less than or equal to a certain number c. On the other hand, the variable reliability sampling method is a form of sampling plan where the lot is accepted if the reliability evaluation scale such as MTBF satisfies a certain standard. Both sampling plans may also use inspection tables.