• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.160-165
• /
• 2009

This study was undertaken the effect of high temperature and high humidity on protein expression and especially plasma membrane (PM) $H^{+}ATPase$ of umbel with flowers of early cultivar 'Shinsunhwang' and intermediate cultivar 'Maebsihwang' of onion (Allium cepa L.). There were no visible any difference on the protein pattern from before flowering stage to full flowering stage of two onion cultivars, however, seed set stages were revealed induced/deduced protein patterns. At day 18, protein expression pattern of the high temperature and high humidity treatments of two cultivars was significantly reduced compared to controls. Furthermore, various protein expression of the high temperature treatment was more reduced compared to high humidity treatment. PM $H^{+}ATPase$ expression of the control plants of two onion cultivars was clearly shown, but was not detectable under high temperature treatment of the two onion cultivars using western blot analysis. PM $H^{+}ATPase$ expression of the high humidity treatment was faintly detected intermediate cultivar 'Maebsihwang', not early cultivar 'Shinsunhwang'. These results indicate that protein expression pattern and PM $H^{+}ATPase$ under high temperature treatment was considered to be more damaged compared to high humidity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.247-258
• /
• 2000

It is thought that impact damages and hygrothermals can affect to CFRP (Carbon-fiber reinforced plastic) composite laminated due to the sensitivity on the composite laminated Therefore, this paper focuses on the fracture mechanisms experimentally based on a scanning acoustic microscope (SAM) when subjected to impact damages, i.e., foreign object damages(FOD), and also the influence of impact damages and hygrothermals on residual fatigue bending strength of CFRP laminates. Composite laminates used in the experiment are CF/EPOXY orthotropy laminated plates, which constist of two-interfaces [04/904]s. A steel ball launched by an air gun collides against CFRP laminates to generate impact damages. Bending fatigue tests are periodically interrupted for a nondestructive evaluation (NDE) measurement of the progrossive damages to built the fracture mechanism by impact damages, and three-point fatigue bending tests are carried out to investigate the influence of hygrothermals on the effect on the residual bending fatigue strength of CFRP laminates.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.25-29
• /
• 2009

High temperature high humidity and thermal shock reliability tests were performed for the board level COB(chip-on-board) flip chip packages using self-formulated and commercial NCPs(non-conductive pastes) to ensure the performance of NCP flip chip packages. It was considered that the more smaller fused silica filler in prototype NCPs is more favorable for high temperature high humidity reliability. The failure of NCP interconnection was affected by the expansion of epoxy due to moisture absorption rather than the fatigue due to thermal stress. It was considered that the NCP having more higher adhesive strength seems to be more favorable to increase the thermal shock reliability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.759-764
• /
• 2017

This research investigated the hygrothermal effect on the strength of bolt jointed section and moisture contents of composites exposed to hygrothermal environment for composite aircraft radome. The decrease in strength in the test environment is mainly attributed to the change in the material properties of the matrix due to temperature and moisture. The composite specimens were tested in three different environmental conditions: RTD(room temperature and dry), CTD(cold temperature and dry) and ETW(elevated temperature and wet). The failure mode of the bolt jointed composite specimens were studied using tests and finite element analysis. Finite element analysis reasonably predicted the failure load and mode of the joints. A reliability-based design was carried out for the bolt jointed composites of radome.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.146-149
• /
• 2007

1) 자체 제작한 NCP인 A, B, C 3종은 상용화 제품에 비해 도포성에 관련한 특성은 우수한 것으로 나타났으나 Tg 등의 열특성은 개선이 필요한 것으로 판단된다. 2) 접합강도의 경우 4종의 큰 차이가 없었으나 필러가 비교적 적은 조성인 B 조성의 경우 가장 큰 접합강도를 나타냈다. 3) NCP A, B, C 3종에 대한 접속저항 측정 결과 필러가 가장 많은 C의 경우가 가장 높은 저항 값을 보였으며 이는 가속 고온 고습 시험에 대한 결과에서도 급격한 접속률 감소를 통해 확인할 수 있다. 4) 시간에 따른 접속저항의 급격한 증가는 NCP 성분 중 친수성을 가진 물질이 있는 것이 원인이라 판단되며 이에 대한 개선을 통해 고습에 대한 신뢰성을 향상시킬 수 있을 것으로 보인다.

• Journal of Sensor Science and Technology
• /
• v.5 no.3
• /
• pp.33-40
• /
• 1996

$(Ba_{0.5}\;Ca_{0.5})TiO_{3}$ humidity-sensitive devices were fabricated by a solid reaction method, and their electrical properties were investigated. The specimens exhibited good humidity sensitivity, in which the impedance changes linearly. It is shown that electrical conduction with moisture adsorption is dominated by the ions through characteristics of charging and discharing current, and electrical conductivity increases as rasing the temperature and relative humidity. It is realized that relative permittivity increases and activation energy decreases with increasing relative humidity.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.321-331
• /
• 2016

Textiles damage caused by acetaldehyde($CH_3CHO$) is not clear as compared to other materials. Total 20 specimens were prepared using 4 different materials (silk, cotton, ramie, hemp) after dyed with 4 colors (undyed, red, yellow, blue, black). The specimens were exposed to $CH_3CHO$ gas in the test chamber. First, textile specimens' damage by differert concentration of acetaldehyde(0.1, 0.5, 1, 10, 100, 500, 1000 ppm) was tested. Second, accelerared damage to the textile specimens were tested according to the temperature and humidity conditions at the damage levels. Third, damage of deliberately degraded textile specimens were examined at the damage levels. After the exposure, optical, chemical, and physical evaluation was carried out. As a result, at 1000 ppm/day, the color difference of cotton_yellow has increased. At the condition of $25^{\circ}C-80%$, $30^{\circ}C-50%$, $30^{\circ}C-80%$, the color difference of yellow specimens has increased and grey scale rating has decreased. At $30^{\circ}C-80%$, acetate of cotton_undyed increased and the pH of silk_undyed decreased. In the case of deliberately degraded textile specimens, actetate concentration of black specimens increased. In conclusion, damage to the traditional fabric by acetaldehyde is not impact. However, it is expected that yellow specimens will be bleach and black specimens' actetate concentration will be increase.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.19-24
• /
• 1998

vortex tube의 에너지 분리현상이 Ranque에 의해 처음으로 발견된 이래 vortex tube는 산업현장에서의 그 이용률이 점차 증대되고 있다. 특히, 최근에는 작업자의 쾌적한 작업환경을 조성하여 작업능률을 향상시킬 목적으로 제철소 등의 고온, 고습 작업장이나 분진, 석면, 유해먼지나 가스, 증기 등이 많이 발생하는 작업장에서 냉각복(air cool jacket) 또는 공기공급식 호흡보호구의 공기공급시스템에 많이 활용되고 있다. 이러한 vortex tube를 이용한 냉각복 및 호흡보호구는 작업자의 능률향상뿐만 아니라 직업병의 예방 및 안전측면에서 매우 효율성이 높아 그 적용범위가 점차 확대될 전망이다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.364-367
• /
• 2001

lithography를 사용하여 패턴 형성에 이용되는 감광성 고분자 바인더 수지로는 통상 아크릴수지 또는 폴리이미드 수지가 사용된다. 폴리이미드 수지는 양호한 성능을 나타내지만 패턴 형성에 난점이 있다. 반면 아크릴수지는 패턴현상성은 우수하지만, 내열성능이 폴리이미드 수지보다는 낮기 때문에 고온 고습하에 기판을 장시간 방치한 경우, 화소내 도막의 변색이나 중량감소 등 여러 문제가 생길 수 있다. (중략)

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.27 no.6
• /
• pp.523-532
• /
• 1998

우리나라의 여름철 기후는 장마라는 일정기간의 우기와 더불어 고온 다습한 특성을 가지고 있다. 다습한 환경은 주거환경에서 곰팡이 균이 번식하는데 좋은 조건이 되며, 산업환경에서는 각종 기자재 및 원자재를 부식시키고, 일부 작업 공정을 어렵게 하는 문제점을 유발한다. 반면, 온도는 높지만, 습도가 낮은 중동 사막지역의 경우는 수 천년 동안 미이라가 훌륭하게 보존되어 왔다. 따라서 상대적으로 고습 기후 조건을 갖는 지역은 저습 기후 지역에 비하여 더 큰 습도제거 대책이 필요하게 되는 불리함이 있다.