• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.83-89
• /
• 2024

In order to confirm the safety against vibration of high-pressure fittings for mobile hydrogen charging devices, the natural frequency was confirmed through ANSYS, and vibration data occurring during driving was applied to utilize the vehicle's operating power spectral density data specified in MIL-STD-810H regulations. Fatigue analysis and resonance were confirmed, and as a result, it was confirmed that the sum of the pure phase ratios was less than 1 for the driving history presented in the standard, and there was no risk of resonance.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.112.1-112.1
• /
• 2010

수소경제사회를 위한 수소인프라 구축에서 가장 중요한 부분이 현지설치형 수소스테이션이라고 하겠다. 이러한 수소스테이션은 일본, 미국, 유럽 등 선진각국에서 2015년에 상용화를 계획한 수소연료전지자동차의 보급에 필요불가결한 설비이므로 이들 지역을 중심으로 수요가 발생할 것으로 보인다. 선진국에서는 수소연료전지자동차의 경우 상용화가 이루어지면 2020년경 그 비율은 전체 자동차의 약 5% 수준을 점유할 것으로 보고 있다. 현재 국내에서도 정부주관으로 2015년부터 보급 목표로 수소연료전지차 모니터링연구가 수행되고 있다. 이에 따라 이미 외국 설비를 중심으로 수소스테이션 실증연구가 이루어졌으며, 각 기업체 및 연구기관에서 개질기, 고압압축기, 디스펜서 등 많은 요소기술 개발에 박차를 가하고 있으며, 이 결과로 향후 수소스테이션 국산화에 많은 기여를 할 것으로 사료된다. 아울러 이번 연구는 수소스테이션의 핵심부분인 수소스테이션용 제어로직을 개발하고 시뮬레이터를 제작한 결과에 대해 발표하고자 한다.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.10-17
• /
• 2019

According to South Korea's policy of supplying eco-friendly hydrogen vehicles, related industries are actively conducting research on the development of hydrogen cars and hydrogen charging station infrastructure. On the other hand, there is a lack of empirical research and assessment of the risk of non-metallic materials (such as liners, seals, gaskets) for classified materials that directly affect the durability and reliability of hydrogen vehicles and hydrogen charging stations. In this study, the risk factors for liners and seals of non-metallic parts used in high-pressure hydrogen installations were derived using FMEA, and the RPN values were calculated by converting the severity, frequency of occurrence and degree of detection into scores. The maximum value of the RPN 600, minimum value 63, average value 278.5 was calculated and periodic control of the liner and seal was identified as important. In addition, through hydrogen soakage and oxygen aging tests for non-metallic rubber products, physical test values that can be used as basic data were presented.

• Journal of the KSME
• /
• v.31 no.9
• /
• pp.780-788
• /
• 1991

수소를 에너지매체로 하여 체계적으로 이용하기 위하여 다음과 같은 사항이 예상된다. 첫째, 물에서 수소를 만들이 위하여 어떠한 에너지원을 사용해야 하는 문제이다. 화석연료나 원 자력으로는 깨끗한 에너지시스템이라는 본래의 목적에 어긋난다. 그래서 태양에너지를 이용하는 것이 원칙이라고 생각한다. 둘째, 수소의 수송과 저축의 방법인데, 파이프라인이나 고압봄베와 같은 종래의 방법을 극복하는 혁신적인 금속수소화물법이 중요하다고 생각된다. 철 . 티탄합금, 란탄 . 니켈합금, 마그네슘 . 니켈합금 등은 합금 체적의 100배에 가까운 수소를 흡장할 수 있는 특성을 가지고 있다. 셋째, 수소에너지가 석유에 대체되기 위해서는 에너지를 수소로 변경함으로써 석유로는 불가능 했던 것이 가능해질 수 있는 이용법을 개발하는 일이다. 넷째, 수소를 2차 에너지로 사용함으로써 전력계층과의 협조체제가 확립되어 에너지원, 에너지 매체, 에너지이용의 협조적이며 유기적인 시스템이 가능해질 것으로 생각된다. 전력이 남아돌 때는 물분해로 수소를 만들어 저축하고 전력이 부족할 때는 연료전지를 사용하여 전력으로 바 꾼다.

• 기계와재료
• /
• v.16 no.4 s.62
• /
• pp.90-99
• /
• 2004

• Superconductivity and Cryogenics
• /
• v.23 no.2
• /
• pp.2-6
• /
• 2021

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.521-522
• /
• 2015

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.85-99
• /
• 2024

As the proliferation of hydrogen electric vehicles accelerates, there is observed diversification in hydrogen refueling station models. This diversification raises safety concerns for different types of stations. This study conducted a quantitative risk assessment of a multi-vehicle hydrogen station, capable of simultaneously refueling cars, buses, and trucks. Utilizing Gexcon's Effects&Riskcurves Software, scenarios of fire and explosion due to hydrogen leaks were assessed. The study calculated the impact distances from radiative heat and explosion overpressure, and measured risks to nearby buildings and populations. The largest impact distance was from fires and explosions at dispensers and high-pressure storage units. High-pressure storage contributes most significantly to personal and societal risk. The study suggests that conservative safety distances and proper protective measures for these facilities can minimize human and material damage in the event of a hydrogen leak.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.4
• /
• pp.302-310
• /
• 2013

As an initial step to develop a liquid hydrogen pump of piston type operated under cryogenic and high pressure, leakage and piston head shape for the piston pump were discussed with temperature and pressure. As the results, the leakage depended on correlation among density, viscosity, clearance area by the low temperature. In order to reduce the leakage, it was found that the air-tightness can be improved by minimizing contact surface between piston and cylinder, and also increasing pressure in-cylinder can reduce piston clearance. Among the proposed piston shapes, D type piston shape had the most air-tightness. D type piston had smaller contact surface than other piston shape and easier expansion of cup shape by pressure. The leakage of D type piston shape was found about 7%, compared with A type piston shape. But it was required that analyze about vapor lock by friction and wear resistance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.2
• /
• pp.158-163
• /
• 2022

The test method on the Type II high-pressure hydrogen storage tanks made of the metal wire hoop winding is a complex and high risk. Also closeup on the tank being test is difficult. In this study, we studied a mechanical test method for a high-pressure hydrogen tanks. This method must be simple, risk-free and possible to observe the change in microscopic behavior of a metal wire on a liner. As the results, it was possible to observe the microscopic behavior on the metal wire by the mechanical test method. Also, a simple and risk-free test was possible compared to the conventional test method for high pressure hydrogen tanks.