• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.7-13
• /
• 2013

A scaled version of a roller rig is developed to demonstrate the dynamic characteristics of a railway vehicle for academic purposes. This rig is designed based on Jaschinski's similarity law. It is scaled to 1/10 of actual size and allows 9-DOF motion to examine the up and down vibration of a train set. The test rig consists of three sub-hardware components: (i) a driving roller mechanism with a three-phase AC motor and an inverter, (ii) a bogie structure with first and second suspensions, and (iii) the vehicle body. The motor of the rig is capable of 3,600rpm, allowing the test to simulate a vehicle up to a maximum speed of 400Km/hr. Because bearings and joints are properly connected to the sub-structures, various motion analyses, such as a lateral, pitching, and yawing motion, are allowed. The slip motion between the rail and the wheel set is also monitored by several sensors mounted in the rig. After the construction of the hardware, an experiment is conducted to obtain the natural frequencies of the dynamic behavior of the specimen. First, the test rig is run and data are collected from six sets of accelerometers. Then, a numerical analysis of the model based on the ADAMS program is derived. Finally, the measurement data of the first three fundamental frequencies are compared to the analytical result and the validation of the test rig is conducted. The results show that the developed roller rig provides good accuracy in simulating the dynamic behavior of the vehicle motion. Although the roller rig designed in this paper is intended for academia, it can easily be implemented as part of a dynamic experiment of a bogie and a vehicle body for a high-speed train as part of the research efforts in this area.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.41-46
• /
• 2005

In this paper, the flow phenomena and free surface wave pattern around the hull with a transom stern advancing on the free surface in steady state had been studied and the numerical analysis program had been developed using Rankine source panel method based on potential flow analysis in which the non-linearities of the free surface boundary conditions had been fully satisfied. To verify the validity of the developed program the numerical calculations for Athena hull and KCS(KRISO container ship) hull had been performed and the results of the numerical computation had been compared with the ones of the model test experiment.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.158-164
• /
• 2011

The study on the improvement of resistance performance is very important for coastal fishing boats in Korea, because the prices of fuel oil are gradually risen and the demand of high-speed fishing boats is increased lately. This study is concerned with the improvement of the resistance performance for Korean high-speed small coastal fishing boats. A semi-planing hull form of Korean small coastal fishing boat is selected in the role of initial hull. From the modification of the hull form parameters and the local characteristics of the hull form, the improvement of the resistance performance is achieved. The resistance performances of the initial and the modified hull forms are estimated by using a numerical simulation method. Also, ship model tests are carried out in ship model basin.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.87-97
• /
• 1998

One of good ways to make a ship perform well in rough seas is to reduce its waterplane area and accordingly is subject to a reduced wave exciting forties. However, a great reduction of the waterplane area may create a penalty in speed performance due to the increased ratio of the wetted area to the displacement volume. This paper suggests a new catamaran hull form which compromises the speed and seakeeping quality by increasing the waterplane area somehow compared with that of the conventional SWATH ship. A 350 passenger carrying SWATH ship with a cruising speed of 30 knots in sea state of 4 has been developed and its performance was validated by the model tests. The design concept resistance performance and seakeeping dualities of the design craft are presented together with its comparative performance comparison with other high speed crafts.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.53-60
• /
• 1999

Prior to sea trials, dock trials are usually carried out in order to check the main propulsion system and auxiliaries. At that time the motion of a ship is limited by mooring ropes. In Hyundai Heavy Industries, a simple equation is used to obtain propeller thrust which is used as an input data of mooring analysis. Recently the ship size and the engine power become larger. Therefore a careful analysis of the mooring condition is necessary in order to avoid possible accidents. In this study propeller thrust at deck trials is reviewed and examined through a series of model tests.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.59-65
• /
• 2010

This study presents the design procedure for optimizing the semi-planing hull form, including appendages, using numerical and experimental methods. Four different referenced semi-planing hull forms were compared to determine their hydrodynamic performances, and one of the hull forms was modified for optimum operation at high-speed conditions (0.4 < $F_{NL}$ < 0.9). The optimized, semi-planing hull form was tested in the towing tank to investigate its resistance characteristics. Also, the results of the model tests with differing design parameters were used to choose the stern wedge and the spray strip to improve the hydrodynamic performance at high speeds.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.1-6
• /
• 2013

A 25ft class fishing leisure boat is developed, and the resistance performances are investigated by a model test in a high-speed circulating water channel. The design speed of the developed ship is 25 knots using a 150 ps outboard engine. A catamanan type hull form using a planing section is adopted considering the Froude number and large deck area. The effect of a center body attached on the bottom of the cross deck is studied under various conditions. Wave patterns are observed to make clear the relationship between the resistance performance and the wave characteristics. The results show that the shape of the center body and the position of the chine line can have a strong effect on the resistance performance in a certain velocity range.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.1
• /
• pp.8-16
• /
• 1981

A mathematical model based on the water flow equation was developed with the Ohm's analogy and the partial differential equations. Simulation of water uptake was performed by numerically solving the equations with the aid of a differential equation solver, DGEAR in IMSL package, in FORTRAN version. The input data necessary were climatological parameters (temperature, solar radiation, humidity and wind speed). plant parametors (leaf water potential, leaf area, root conductivity and root length density) and soil parameters (hydraulic conductivity and The graphical comparison of the simulated and measured water contents as the functions of time showed good agreement, but there still was some disparity due to possible inacouracy of the field measured parameters. The simulated soil evaporation showed about 2 mm/day early in the growing period and dropped to about 0.4 mm/day as the full canopy developed and the soil water depleted. During the dry period, soil evaporation was as low as 0.1 mm/day. The transpiration was as high as 5mm/day. Deep percolation calculated from the flux between the 180-cm layer was about 0.2mm/day and became smaller with time. After the soil water of upper layers depleted, the flux reversed showing capillary rise. The rate of the capillary rise reached about 0.07mm/day, which was too low to satisfy water uptake of the root system. Therefore, to increase use of water in deep soil, expansion of the root system is necessary.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.1
• /
• pp.35-41
• /
• 2014

Many infra suructure such as road, railway, building and utility foundations have been damaged by the repeated freezing and thawing of the soil during winter and spring every year in seasonal frost region. The frost penetration depth is most important factor in the design of structure such as road, railway and building in seasonal frost region. This paper presents the results of calculation of frost penetration depth and frost heaving in concrete track for railway construction. Model concrete track were installed near the railway track in Gangwon, Gyeonggi, Choongbuk province and frost penetration depth were measured using methylene blue frost penetration depth gauge. Model concrete track in Cheolwon, frost heaving of concrete track were also evaluated. The measure of maximum frost penetration depth and frost heaving can be applied to design railway track for cold region in Korea.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.905-910
• /
• 2007

As the ship is getting bigger and faster lately, ship's structure or cargoes might be often damaged and the ship might be cut in two in extreme conditions by a wave impact on its bow. In this paper, the vertical acceleration, which is one of factors for evaluating seakeeping performance, was measured under the various sea states by the hull stress monitoring system(HMS) on the bridge, and the result was compared with those of model test and theoretical studies. Then, we confirmed the seakeeping performance of T.S. HANBADA by comparing it with ITTC seakeeping criteria This result will be a great help for the safe navigation by making it possible to estimate the possibility of work and the amount of risk under the various sea conditions with which may be confronted, and the shipbuilding yard can be possible to construct the vessel with superior performance through these data measured on the actual ship.