• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.432-437
• /
• 1999

Pyrolysis of polyethylene was carried out in the stainless steel reactor of internal volume of $10cm^3$. Pyrolysis reactions were performed at temperature $390{\sim}450^{\circ}C$ and the pyrolysis products were collected separately as reaction products and gas products. The molecular weight distributions(MWDs) of each product were determined by HPLC-GPC and GC analysis. Distribution balance equation for MWDs of random and specific products were proposed to account for initiation-termination and propagation-depropagation, such as hydrogen abstraction, chain cleavage, coupling of polymer and radical. A separate chain-end scission process produces low molecular weight noncondensable gases(C1 through C5) of average molecular weight 38. Activation energies of the random-chain scission and chain-end scission rate parameters, respectively, were determined to be 35, 17 kcal/mole.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.102-106
• /
• 1987

In order to examine the appropriateness of types of pigskin as a raw material for gelatin production, comparison was made on the quality of gelatins made from raw and scalded pigskins. Raw and scalded pigskins were acidified in 1.7% HCl solution for 15-18 hr and then washed by tap water for 10 hr. After washing, pigskins were extracted at $60^{\circ}C$, $70^{\circ}C$ and $80^{\circ}C$ to produce gelatins. Gelatins from raw pigskins appeared to be better in gel strength than those from scalded ones at all extraction temperatures. Gelatin yield was higher with raw than with scalded pigskins. With the increase of extraction temperature, the decrease in gel strength and viscosity was resulted in. More colored gelatins were produced with increasing extraction temperature in both raw materials. Electrophoretic pattern of gelatins showed that higher molecular weight fractions decreased with the increase of extraction temperature and pigskin gelatin had more complicated molecular composition than that of type B gelatin (alkali-treated gelatin).

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.489-493
• /
• 2012

Positron Annihilation Lifetime Spectroscopy is a non-destructive technique to study voids and defects in solids by the measurement of gammas from electron-positron annihilation. In this study, we measured the lifetime of CR, EPDM, NBR, all of which are widely used polymer in various fields. A conventional fast-fast coincidence system in KAERI(Korea Atomic Energy Research Institute) has been used to measure the lifetime spectra, Three lifetime components were analyzed from each lifetime spectra. According to Tao-Eldrup model equation, the size and fraction of free-volume were calculated. Mean radius and free volume fraction of CR, EPDM NBR are $0.1217nm^3$(1.9103%), $0.14780nm^3$(5.3147%), $0.1216nm^3$(2.6381%), respectively. Through these measurements, we identified the feasibility of the PAL system for polymer analysis.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.607-611
• /
• 2007

To improve transfection efficiency, we prepared histidine-low molecular weight water-soluble chitosan (LMWSC) having the potential to form complex with DNA as a cationic polymer. Histidine-LMWSC was synthesized by the esterification reaction and removing phthaloyl group. The histidine-LMWSC was characterized using FT-IR, $^1H$ NMR spectra. Histidine-LMWSC was complexed with plasmid DNA (pDNA) in various polymer/DNA (N/P) weight ratios, and the complex was identified using gel retardation assay. The particle sizes of the hisitidine-LMWSC/DNA complexes were measured on a DLS instrument by fixing the histidine-LMWSC/DNA weight ratio of 10/1. Owing to the utilization of a large excess amount of cationic LMWSC against anionic DNA, the particle size of histidine-LMWSC/DNA complexes was in the range of 100~200 nm. Therefore, histidine-LMWSC will be useful in the development of gene carriers.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.877-883
• /
• 2006

An alternative method to remove and recover heavy metals is biosorption based on metal-sequestering properties of natural or biological origin. In this study, the effects of factors such as temperature, pH, initial concentration of lead, and initial amount of biomass on biosorption of lead using Aureobasdium pullulans were investigated. A. pullulans has an excellent selectivity to remove lead than other heavy metals such as cadmium, chromium, nickel in pure and mixed solution. The optimum temperature of biosorption with A. pullulans was $40^{\circ}C$ and the amount of removal increased at high pH. The higher initial lead concentration or the lower cell dry weight, the higher amount of lead was adsorbed. The adsorption isotherm of lead was accorded with Freundlich model. The adsorption capacity and initial adsorption rate of living A. pullulans were about twice higher than that of dead one.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.158-161
• /
• 2006

Recently the application of plastic optical fiber (POF) in automotives and planes demands the heat-resistant and high refractive index con materials. We synthesized polyglutarimides (PGIs) via imidization of PMMA with primary amines under high pressure and high temperature and investigated thermal and optical properties by varying the molar ratio of amines and the type of amines (ethyl amine vs. isopropyl mine). The degree of imidization was calculated based on the peak intensity in $^1H$ NMR and FTIR. We found that the glass transition temperature $(T_g)$ of PGIs increased over $30^{\circ}C$ compared to the traditional core materials in POF, PMMA, and they are stable up to $300\sim400^{\circ}C$. PGIs anthesized with ethyl mine show the better heat resistance than those with isopropyl amines. Additionally, they show the comparable transparency and higher refractive index than PMMA. It implies that they can be utilized as the excellent photo-efficient and heat-resistant core materials in POF.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.105-112
• /
• 2002

The low actuation voltage and quick bending response of IPMC(ion-exchange polymer metal composite) are considered attractive for the construction of various types of actuators. In this study, in order to develop a new type actuators by using the IPMC platinum electrode of IPMC are fabricated by using electroless impregnation-reduction method plating. As the platinum-plating times are increased, IPMC performance was improved in terms of bending displacement and force due to the enhanced surface conductivity. In addition, we investigated the basic actuation characteristics of resonance frequency and actuator length as well as the effect of water uptake and ion mobility. Using the classical laminate theory(CLT), a modeling methodology was developed to predict the deformation, bending moment, and residual stress distribution of anisotropic IPMC thin plates. In this modeling methodology, the internal stress evolved by the unsymmetric distribution of water inside IPMC was quantitatively calculated and subsequently the bending moment and the curvature were estimated for various geometry of IPMC actuator.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.218-224
• /
• 2013

Graphene oxide (GO) was prepared by the Hummers and Offeman method from graphite. Two different types of functionalized graphene sheets (FGSs) were synthesized by using GO. Hexamethylamine (HDA) substituted vertically to the graphene sheet (Ver-HDA-GS) was synthesized from HDA and epoxy group in GSs. Whereas, horizontally substituted hexadecanol (HDO) to the GS(Hor-HDO-GS) was synthesized from HDO and alcohol groups via reduced GO (RGO), respectively. The structures of the GO, RGO, Ver-HDA-GS, and Hor-HDO-GS were identified by Fourier transform infrared (FTIR). In addition, we examined the thermal stability and morphology. Atomic force microscope (AFM) disclosed that Ver-HDA-GS consisted of one- or two-layer graphene regions. However, the Ver-HDA-GS layers showed average thickness of 1.76 nm. The thermal stabilities of the FGSs were better than those of the GO and RGO. The Ver- HDA-GS was well dispersed in common solvents such as dimethyl sulfoxide (DMSO), toluene, chloroform, and decalin.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.18-23
• /
• 2000

In this paper, we propose the organic light-emitting devices with vacuum evaporated ultrathin CsF layer between the AI electrode and conjugated polymer MEH-PPV which was spin coated. In this structure, the CsF layer will be well transferred the electron injection from the electrode to the emission layer MEH-PPV. Finally this structure enhances the emission efficiency of the organic light-emitting device. And we measured the I-V-L properties with the split of CsF thickness into the $2{\AA},\;4{\AA},\;8{AA},\;10{\AA},\;20{\AA},\;50{\AA},\;75{AA}$ respectively. And also we evaporated CsF/Al, CsF/Au Cs/Au electrode respectively for the comparison. As the results, we obtained the maximum quantum efficiency 0.6% at $4{\AA}$ CsF thickness and then at $8{\AA}$, it decreased a little but it's still better than pure Al electrode which has 0.01%.

• The Korean Journal of Zoology
• /
• v.22 no.2
• /
• pp.81-93
• /
• 1979

Metabolic changes of early mouse embryos treated with progesterone were investigated in order to elucidate the mode of action of progesterone on embryogenesis in vitro. The embryos were cultured, and labelled with radioactive precursors of macromolecules for certain periods in the absence or presence of various concentrations of progesterone by employing the microtube culture technique. The changes of transport and macromolecular synthesis systems of the embryos were examined by measuring the amounts of uptake and incorporation of the precursors. The results obtained were as follows: 1. Progesterone stimulated markedly the uptake of amino acids, but rather suppressed their incorporation by embryonic cells. 2. Progesterone suppressed both the uptake and incorporation of nucleotide precursors (uridine and thymidine) by embryonic cells. 3. Progesterone penetrated into the embryonic cell membranes and was taken up by them. The present results seem to indicate that the inhibition of the progesterone on the mammalian embryogenesis in vitro may not be directly related to the membrane transport system. They seem to imply that progesterone would penetrate into the embryonic cells and may directly block the biosynethetic pathways of macromolecules, and so lead to the inhibition of the embryogenesis in vitro.