• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.206-206
• /
• 2010

정보화 기술이 급속히 발전함에 따라서 보다 많은 양의 data를 전송, 처리, 저장 하게 되면서 이를 처리 할 수 있는 대용량, 고속, 비휘발성의 차세대 메모리의 개발이 요구 되고 있다. 이 중 저항 변화 메모리(ReRAM)는 일반적으로 전이금속산화물을 이용한 MIM 구조로서 적당한 전기 신호를 가하면 저항이 높아서 전도되지 않는 상태(Off state)에서 저항이 낮아져 전도가 가능한 상태(On state)로 바뀌는 메모리 특성을 가진다. ReRAM은 비휘발성 메모리이며 종래의 비휘발성 기억소자인 Flash memory 보다 access time이 $10^5$배 이상 빠르며, 2~5V 이하의 낮은 전압에서 동작이 가능하다. 또한 구조가 간단하여 공정상의 결함을 현저히 줄일 수 있다는 점 등 많은 장점들이 있어서 Flash memory를 대체할 수 있는 유력한 후보로 여겨지고 있다. 저항 변화의 특징을 잘 나타내는 물질에는 $TiO_2$, $Al_2O_3$, $NiO_2$, $HfO_2$, $ZrO_2$등의 많은 전이금속산화물들이 있다. 본 연구에서는 Reactive DC-magnetron Sputtering 방법과 DC-magnetron sputter를 이용하여 Ti를 증착한 후 Oxidation 방법으로 각각 증착한 $TiO_2$박막을 사용하여 저항변화특성을 관찰하였다. $TiO_2$상부에 Atomic Layer Deposition (ALD)를 이용하여 $HfO_2$ 박막을 증착하여 표면처리를 하고, 또한 $TiO_2$에 다른 전이 금속박막 층을 추가 증착하여 저항변화 특성에 접합한 조건을 찾는 연구를 진행하였다. 하부 전극과 상부 전극 물질로는 Si 100 wafer 위에 Pt 또는 TiN을 사용하였다. 저항변화 특성을 평가하기 위해 Agilent E5270B를 이용하여 current-voltage (I-V)를 측정하였다. X-ray Diffraction (XRD)를 이용하여 증착 된 전기금속 박막 물질의 결정성을 관찰했으며, Atomic Force Microscopy (AFM)을 이용하여 증착 된 샘플의 표면을 관찰했다. SEM과 TEM을 통해서는 sample의 미세구조를 확인 하였다.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.9-16
• /
• 2011

To develop a 6061 aluminum alloy with low residual stress and high tensile strength, a cryogenic treatment process was investigated. Compared to the conventional heat treatment process for precipitation hardening with artificial aging, the cryogenic treatment process has two additional steps. The first step is cryogenic quenching of the sample into liquid nitrogen, the second step is up-hill quenching of the sample into boiling water. The residual stress for the sample was measured by the $sin^2{\psi}$ method with X-ray diffraction. The 6061 aluminum alloy sample showed 67% relief in stress at the cryogenic treatment process with artificial aging at $175^{\circ}C$. From this study, it was found that the optimum cryogenic treatment process for a sample with low residual stress and high tensile strength is relatively low cooling speed in the cryogenic quenching step and a very high heating speed in the up-hill quenching step.

• Transactions of Materials Processing
• /
• v.3 no.2
• /
• pp.167-177
• /
• 1994

Most of bulk metal forming processes may be limited by ductile fracture such as surface or internal cracks developing in the workpiece. It is important to identify the conditions within the deforming workpiece which may lead to fracture, and then it is possible to modify the forming processes to produce sound and reliable product. This paper suggests the scheme to simultaneously accomplish prediction of fracture initiation and analysis of deformation in metal forming processes. The Cockcroft-Latham criterion which is successfully applied to a variety of loading situations is used in the present investigation to estimate whether fracture occurs during the deformation process. The numerical predictions and experimental results of two types of metal forming process are compared, axisymmetric extrusion and simple upsetting. The proposed scheme has successfully predicted the fracture initiation found experimentally.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.171-177
• /
• 2008

The characteristics of sheet metal process are little loss of material during process, the short processing time and the excellent price and strength. It has been widely used in autobody, electronic components, aircraftbody, etc. Lancing is a press operation in which a single-line cut or slit is made on part way across the strip stock, without removing any metal. In this paper, we examined the validity of finite element method analysis on the automobile CTR-PLR -L/R stamping process by using the lancing engineering method. As a result, it has shown that the proper lancing engineering method could prevent fracturing by improving sheet metal flow.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.72-72
• /
• 2007

Ni 단일박막과 Ni-Zr 합금박막을 단결정 Si 기판위에 증착한 후 RTP를 이용하여 Ni 실리사이드 형성반응을 관찰하였고, $500^{\circ}C$에서 형성된 Ni 실리사이드 박막에 $600^{\circ}C,\;650^{\circ}C$에서 후속 열처리 공정을 수행하여 열 안정성을 평가하였다. RTP를 이용하여 실리사이드를 형성할 경우, Ni/Si 계의 경우, 고온 열처리에서 $NiSi_2$ 결정립의 과대 성장 및 단락이 발생하였지만, Ni-Zr/Si 계의 경우 첨가된 내열금속 원소가 NiSi에서 $NiSi_2$ 로의 상전이와 핵생성을 지연시켜 Ni 실리사이드 박막의 열 안정성 개선 효과를 확인하였다.

• Journal of Conservation Science
• /
• v.7 no.1
• /
• pp.23-30
• /
• 1998

The examination of scientific analysis could give many information on the object of ancient glass. It would be allowed to understand the cultural situation and a course of inflow that the data of glass composition was classified by raw materials, technique of making, period and regional groups. Quantitative analysis conditions for SEM-EDS were set for glass and glaze on the pottery and 62 samples of glass beads excavated from Yangdong-ri remains at Kimhae were analyzed and classified. It was found that the glass beads were made of all alkali-glass. In addition, it was postulated that the potash glass was appeared from the 1st century A.D. and soda glass was appeared from the late second or early 3rd century A.D. in this region. The colors of glass were closely related to the concentration of metallic elements such as copper, iron and manganese. It was confirmed that the composition of glass beads could be classified and characterized by raw materials, color, period and regional groups.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.52-63
• /
• 2004

This study tries to investigate the differences in combination of gold and other metals used in the surface guilt of the gold-guilt relics found in the Seonwonsa Temple of the Korea Dynasty. Our findings are as follows. The gilded roller knobs found in the Seonwonsa Temple of the Korea Dynasty can be classified into three groups by the color of the surface guilt: gold, white-gold, red-gold. By the color it is found that gold type contains $Au\;81.0\%,\;Ag\;3.5\%,\;Cu\;5.6\%$, white-gold type contains $Au\;82.1\%,\;Ag\;10.6\%,\;Cu\;2.4\%$, and the red-gold type contains $Au\;59.9\%,\;Ag\;3.7\%,\;Cu\;33.2\%$. The gold metal used for guilt is found to be amalgam of Hg and the depth of the guilt was uneven with the average of $2.5\~25{\mu}m$. These gilded roller knobs were produced in two methods. One of them was made out of pure bronze, and the other out of bronze veneer and led. Since we found led on the outer surface, we conclude that the led juncture was later guilt with gold.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.6-6
• /
• 2018

본 연구에서는 고문헌에 기록된 도금 재료와 도금법 등을 확인하고 이를 기초자료로 활용하여 매실산을 사용한 금(Au)-수은(Hg) 아말감기법으로 고대 도금(鍍金)기술을 되살리고, 이를 토대로 경주 월지에서 출토된 금동삼존판불을 복원하였다. 먼저, 전통 도금법을 되살리기 위해서, "오주서종박물고변", "확지신편", 조선시대 각종 의궤 등에 공통적으로 기록되어 있는 매실에 주목하고, 매실을 3~4개월 발효 숙성 후 착즙한 뒤 그것을 농축하여 만든 매실산을 도금 실험에 적용하였다. 금아말감 도금을 위하여 월지 출토 금동삼존판불의 바탕소지금속인 청동삼존판불을 구리와 주석 89:11(Cu:6kg, Su:750g)로 합금하여 주물사 주조법으로 복원하였으며, 동일한 합금비로 제작된 $2.3cm{\times}3.5cm$(가로${\times}$세로)의 시편에 사전 실험을 실시하였다. 현대적 산처리 방식에 사용되는 질산과 전통방식으로 사용되는 매실산으로 시편에 산처리 한 후 각각 비교해 보고, 금분과 금박, 상온과 가온에 따른 아말감상태를 비교하는 실험을 진행하였는데, 실험에 사용된 매실산 70%는 pH가 1.94로, 오늘날 산처리에 사용하고 있는 질산 20%와는 차이가 있지만, 청동 시편 실험을 통해 매실산에 20분 정도 담근 뒤 금아말감을 도포 후 24시간 지나 가열($380{\sim}400^{\circ}C$) 했을 때 금도금이 잘 되어, 현대적 방법인 질산처리로 도금을 한 시편과 큰 차이가 없는 것으로 관찰되었다. 사전 실험을 통한 결과를 적용한 월지 출토 금동삼존판불 복원은 청동삼존판불 표면처리, 금-수은 합금 및 도금하기, 도금 후 표면처리의 순서로 진행되었는데, 금과 소지금속의 밀착력을 높이기 위해 표면을 숯을 이용해 탈지한 후 물로 씻어내고 매실산을 도포하여 20분 동안 두어 부식 및 세척을 시행하였다. 금도금을 위한 금-수은아말감은 가온할 때 수은이 증발하는 양을 고려하여 금1 : 수은10 비율로 합금하여 완성하였으며, 금아말감 도포 후 약 24시간 지난 다음, $380{\sim}400^{\circ}C$에 가열하여 수은을 기화시켜 도금작업을 완성하였다. 금아말감도금은 평균적으로 6~7차례 시행하여야 완벽히 도금되지만, 본 연구에서는 단 4차례의 도금만으로 금아말감도금을 완성시켰는데, 이것은 금아말감을 바탕소지인 청동에 도포한 후 24시간 동안 금아말감과 청동과의 반응 시간을 두게한 것이 큰 역할을 한 것으로 보이며, 이는 청동시편을 이용한 실험과 과학적 분석을 통하여 입증하였다. SEM으로 표면을 관찰한 결과 아말감 도포시간이 즉시인 경우 도금이 거의 되지 않은 것을 확인할 수 있었고 36시간이 넘어갈 경우 금 도금층이 불균일하게 관찰되었으므로 도금시간은 12시간~24시간 이내가 적절함을 확인할 수 있었다. EDS로 성분을 분석한 결과 산처리 시간이 20분인 시료의 경우 5 wt% 내외로 수은의 비율이 다른 시료에 비해 낮은 것을 확인할 수 있었다. 실험 및 분석결과 산처리 시간이 20분이고 아말감 도포시간이 24시간일 때 도금이 잘 이루어지므로 이 결과를 토대로 금동삼존판불을 복원하였다. 이번 연구를 통해 도금법에 표면을 세척하고 부식시키기 위해 사용한 물질이 매실산임을 찾아내어 확인할 수 있었는데, 이러한 점 에서 이 연구의 가장 큰 의미는 전통 소재와 기술을 복원한 것으로, 앞으로 매실산을 이용한 금 도금기술은 관련 학계에도 큰 기여를 할 것으로 기대된다.

• Conservation Science in Museum
• /
• v.26
• /
• pp.83-182
• /
• 2021

This study summarized the results of the conservation treatment and investigation on the production method of the golden crown (Treasure No. 339) excavated from Tomb No. 129 (also known as Seobongchong Tomb) in Noseo-dong, Gyeongju-si, Gyeongsangbuk-do Province. The golden crown from Seobongchong Tomb was discovered during the excavations conducted by the Museum of the Government-General of Korea in 1926 during the Japanese colonial era. It is currently in the collection of the National Museum of Korea. A total of six Silla golden crowns have survived in Korea, among which the crown from Seobongchong Tomb is the only example with a dome-shaped hemispherical decoration attached with a bird ornament while otherwise showing the typical features of Silla crowns. The crown had been repaired following its excavation using metallic materials and adhesives, but due to the partial deformation and damage brought about by the repair materials, it required further conservation treatment. This article describes in detail the overall process of the conservation treatment and the restoration of the original form of the golden crown from Seobongchong Tomb, particularly the method of reinforcing the joints to secure the stability of the crown. It presents the characteristics of the crown's production as revealed in the investigation during the conservation treatment, and further analyzes the relationship of this crown from Seobongchong Tomb with other Silla crowns through a comparison of their production techniques. The investigation revealed that the crown was primarily decorated with golden sequins at the time of its production. At a later point some of the sequins in the upright ornament were replaced with comma-shaped jade beads and additional comma-shaped jade beads were added to the headband. In order to determine if such modifications to the decoration had occurred with other Silla crowns, the decoration of the six extant Silla golden crowns were investigated. The crown from Cheonmachong Tomb features traces of this same modification to the decoration and possesses other similarities with the crown from Seobongchong Tomb.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.519-532
• /
• 2017

Studies on ancient ironmaking technologies are primarily based on archaeological surveys and scientific analysis data, and technological systems are examined by comparing the results of restorative experiments. In this study, to examine the ancient iron production technologies such as smelting and smithing in the Jungwon area, a restoration experiment was conducted based on archaeological data, and the iron and slag, etc. produced in the experiment were analyzed. Further, the changes in physicochemical properties due to the smelting of the raw material, specifically, iron ore were determined, and the smithing process, which involves fabrication of ironwares, was analyzed along with the characteristics of each step. In the case of smelting, increasing recovery rates and production of high-quality primary iron material were important for the following processes. For the iron bars produced through the smithing process, it was found that quality improvements made by reducing physical defects such as inclusions or gas holes were more important than the composition of the iron itself. The study also yielded comparative study data for various byproducts, such as smithing slag, which could be utilized in other ironmaking technology studies.