• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.147-154
• /
• 2012

In this study, we prepared elastic liposome containing rutin, known as antioxidants, and evaluated the physical characterization and enhanced skin permeation effect. The elastic liposome was prepared using the different ratios of egg phospholipids and $Tego^{(R)}$ care 450. The mean diameter of rutin loaded elastic liposomes formulations ranged between 205.7 ~ 298.0 nm and deforability 20.9 ~ 42.5, The loading efficiency was observed to be 52.0 ~ 71.0 %. The highest loading efficiency (71.0 %) and deformability (42.5) were observed at the optimal ratio of 85 : 15 (egg phospholipids : $Tego^{(R)}$ care 450) in the 0.1 % rutin loaded elastic liposome formulations. The elastic liposome formulation was selected for further transdermal permeation study. The elastic liposome(129.9 ${\mu}g/cm^2$) exhibited a significantly higher skin permeation compared with general liposome (98.0 ${\mu}g/cm^2$) and 1,3-butylene glycol (76.3 ${\mu}g/cm^2$) solution. These results suggest that the elastic liposome formulation using $Tego^{(R)}$ care 450 as a major edge activator could be useful for the delivery of active ingredient through the skin barrier.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.2
• /
• pp.390-397
• /
• 1996

The effects of the mixture of surfactants on the removal of triolein applied to cotton and polyester fabrics were studied. The sunactants which were usually formulated to the Iriundry detergents, such as sodium dodecyl sulfonate (LAS), sodium lauryl sulfate (AS), $\alpha$-olefin sulfonate (AOS, C=14), sodium laurethoxy sulfate (AES, EO=3) and lauryl ethoxylate (AE, EO=7) were used. Washing was done at 40'C, 60"C, 80'c and the surfactant concentration was 0.05%. Backscattered electron imaging was made to study the location of triolein in the yarns. Triolein was removed easily from polyester than cotton fabrics.01eic acid added triolein wa9 removed greater than triolein only, except in AE solutions. In AE solutions, the removal of triolein was increased as the tremperature went higher and the increasing rate of the removal of triolein only was greater than that of oleic acid added triolein. In the result, more triolein was removed from triolein only than from oleic acid added triolein at 80t When the other surfactant was added to LAS, AES was the best to cotton fabrics, AOS was to polyester fabrics. Triolein was located in the lumen and grooves of the fibers and the deeper interfiber spaces. Triolein did not make thin film arround the cotton fiber in the surface, but polyester fibers. These are the main reason why the removal of triolein was difficult from cotton fabrics.rics.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.679-683
• /
• 2021

Lecithin, a zwitterionic phospholipid, forms spherical reverse micelles in nonpolar organic solvents such as decane. The addition of monovalent ions like lithium chloride (LiCl) to lecithin organosols induces the transformation of organosols into organogels due to the entanglement of reverse cylindrical micelles. In this study, we investigate the effect of pentanol acting as co-surfactant on rheological properties of lecithin/LiCl mixtures. From rheological studies, we find that the viscosity and elastic property of organogels decreased upon the addition of pentanol to organogels. The decrease in viscosity and elastic property can be attributed to the shortening of reverse cylindrical micelles confirmed by small angle X-ray scattering (SAXS).

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.1
• /
• pp.27-34
• /
• 2006

We investigated the question whether the efficacy of cleaning tear components on RGP lens and preserving the superior wettability of RGP lens depended on the different type of contact lens care system - RGP lens care solution, SCL care solution, combined solution both for SCL and RGP lens or saline solution. The removal efficacy of the deposited protein was examined by Lowry protein assay and Scanning Electro Microscope(SEM) and residual lipid concentration on RGP lens was determined by High Pressure Liquid Chromatology(HPLC). Wettability was assessed with an equilibrium water-in-air contact angle method. When cared by RGP lens solution, it was demonstrated that 62 percent out of the adhered protein on RGP lens were removed and the removal efficacy of RGP lens solution was not only 4 times than saline solution and the alternative but also higher twice than SCL solution. Contrarily, the SCL solution had the most excellent removal efficacy of the adhered protein on SCL. These results suggest that the cleaning efficacy is thought to be affected by the other factors like the viscosity of care solutions, which mutual contact between RGP lens and care solutions is on the increase due to the viscosity enhancer in RGP lens care solution. RGP lens solution had the greatest removing efficacy to cholesterol and the residual cholesterol concentration was decreased to 50%. It is significant for RGP lens to preserve the superior wettability which means the predictive value for comfortable wearing and it showed that the RGP lens solution offered the most excellent efficacy to maintain the surface wettability. Combined solution both for SCL and RGP lens had weak efficacy of cleaning and maintaining wettability for RGP lens compared to RGP lens care solution.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.373-378
• /
• 1991

The skin and fleshy substance on the net fiber of sponge-gourd fruit pressed mechanically was removed with 0.2% NaOH solution in $3{\sim}5$ hours. The treatment of 0.2% NaOH with 0.02% Monopol(non-ionogenic polyoxethylen derivative) as surfactnat and with 0.1% $Ca(OCl)_2$ as bleaching agent enhanced the effect to remove the fleshy substance and improve the quality of net fiber. Also, the wet hardness and tensile strength of net fiber were controlled by the crosslinkage of the fiber with glu tardialdehyde, glyoxal, and formalin, respectively. The net fiber was stable on the acid and alkaline solutions. Also the range of temperature to degradate the fiber was $338{\sim}385^{\circ}C$. These values indicated a fair stability. The improved net fiber can be used for raw material of bath, dish washing, oil and gas filter, and many kinds of decorations.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.157-163
• /
• 2002

An investigation was carried out to study the characteristics of lipoxygenase in dioctyl sulfosuccinate (aerosol-OT, AOT)/isooctane revered micelles of microaqueous system containing infinitesimal water. ${\alpha}-Linoleic$ acid as a substrate could be analyzed by the colorimetric methodology using 5%(w/v) cupric acetate-pyridine solution and the activity of lipoxygenase was able to be assayed by the degree of ${\alpha}-linoleic$ acid consumption per minute. Optimal pH, temperature, and R-value ([water]/[AOT]) were determined as the value of 5.0, $25^{\circ}C$, and 10.0, respectively. Kinetic analysis of the enzyme reaction under the optimal conditions showed that the values of $K_m$ and $V_{max}$ were 0.31 mM of ${\alpha}-linoleic$ acid and $384.16{\mu}mol$ of ${\alpha}-linoleic$ acid decomposed/min, respectively. The results indicate the reaction to be lipoxygenase-catalyzed oxidation of ${\alpha}-linoleic$ acid in AOT/isooctane reversed micellar system. The inhibitory effect of natural antioxidants on lipoxygenase showed little inhibitory effect of L-ascrobic acid while ${\alpha}-tocopherol$ showed 72% of inhibitory effect.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.113-118
• /
• 2003

Processible polyaniline (PAM) dispersions consisting of polyaniline micro-particles, cyclohexanone, and a polymeric surfactant were prepared in a micro-milling machine with various mixing conditions. The electrochemical properties of the dispersion film coated on Pt electrode were investigated by cyclic voltammetry (CV). The electrochemistry of the PAM dispersion coatings was basically similar to a pure PAM coating based on the results of CV. The results of polarization measurements and open circuit potential measurements carried out in $3\;wt.\%$ NaCI solution showed increase in corrosion potential when the PANI dispersion coatings applied on steel surface. Variation of open circuit potential $(OCP,\;V_{OC})$ of the dispersion coating/steel electrodes was observed, which differed with milling conditions. The results demonstrated practical use of the conducting polymer dispersion as a coating material for corrosion prevention of steel.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.218-224
• /
• 1996

The adsorption of cellulase on celluloses with different crystallinities was carried out In nonionic surfactant(Tween 20) solution. Highly crystallized celluloses were prepared by enzymatic prehydrolyzation. From the experiments, the Langmuir isotherm parameters, maximum adsorption amount (Amax) and adsorption equilibrium constant(Kad) for the adsorption, were obtained in the presence and absence of nonionic surfactant. It was found that the Kad values were decreased by adding Tween 20. This indicates that the adsorption affinity is reduced by nonionic surfactant, and Amax decreased with increasing crystallinity under conditions accompanying in both the presence and absence of surfactant. The thermodynamic parameters such as $\Delta$Ha, $\Delta$Ga, and $\Delta$Sa for the adsorption were calculated by using the experimental data. From these results, it was found that the adsorption processes are exothermic reactions in both the presence and absence of surfactant. The heats of adsorption in surfactant solution(-4.68∼-3.62KJmol-1) are smaller than that of the adsorption in the absence of surfactant(-15.60∼-12.10KJmol-1). These results indicated that the tightness of adsorption was reduced by the addition of surfactant. The $\Delta$Sa values were estimated to be positive. This may suggest that the water and solute are released from cellulose on adsorption. The $\Delta$Sa values in surfactant solution are larger than that of the adsorption in the absence of surfactant. This may suggest that the binding of surfactant on hydrophobic region of cellulase cause dispersion of water and solute molecule orienting around the enzyme molecule. The surfactant played an important role in the desorption of enzyme from cellulose functional groups, and enhance the saccharification of the cellulose.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.653-662
• /
• 2010

This study investigates the effect of particle size on the detergency of particulate soil using an $\alpha-Fe_2O_3$ particle as the model. Monodispersed spherical $\alpha-Fe_2O_3$ particles were prepared by the hydrothermal aging of an acidic $FeCl_3$ and HCl solution. The $\xi$-potential of PET fiber was measured by the streaming potential method. The potential energy of interaction between the particle and fiber was calculated using the heterocoagulation theory for a sphere-plate model. The $\xi$-potential of PET fiber and potential energy of interaction between particles and fiber increased with a decreasing particle size in a DBS solution. However, in the nonionic surfactant solution, the $\xi$-potential signs of PET fiber and $\alpha-Fe_2O_3$ particles were (-) and (+), respectively; there was no repulsive power between the particles and substrate. The adhesion of particles to the fabric increased with increasing particle size in the anionic surfactant solution and their removal from the fabric increased with a decreasing particle size. The adhesion of particles to the fabric and their removal from the fabric was biphasic with a maximum and minimum at 0.1% concentration of the surfactant solution. In the nonionic surfactant solution the adhesion of particles to fabric and their removal from the fabric were greater than the ones in the anionic surfactant DBS solution.

• Resources Recycling
• /
• v.10 no.1
• /
• pp.25-31
• /
• 2001

The heat treatment of PVC film containing PVC 65ft, DOP (Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and sur-face agent was performed under several conditions to study the dehydrochlorination of PVC and char production. In the case of $H_2$ $SO_4$, the dehydrochlorination was ca.100% at $250^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydro-thermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with $Ca(OH)_2$, the sizes of pores produced in char were about sever ~10 $\mu\textrm{m}$ at$ 225^{\circ}C$ for 12h. In the case of $_2$$SO_4$, the size of pores were about 1 $\mu\textrm{m}$ in 5M $_H2$$SO_4$for 12h.