• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.697-701
• /
• 1996

King Sejong's Striking water-clock which brought in use on the first of July in 1434 was mainly composed of timekeeping and time announcing parts signalling twelve double-hours, and five night-watches and night-watch-divisions automatically by means of ball-operating jackworks. The clock was arranged with dual timekeeping system, the one for a full day(twelve double-hours) and the other for five night-watches achieving twelve double-hours and one-hundred interval horary systems. The vessels were arrayed in inflow-type water-clock, a large reservoir on the highest story, a constant-level tank for supplying water to the measuring vessel evenly in the middle, and the lowest tank to receive water from the above constant-level tank. An indicator-rod on the float was raised upwards depending on the water-level increase to show timing scales and also to release small bronze balls from the ball-rack mechanisms implanted on the measuring vessel to signal timing intervals.

• The Korean Journal of Financial Management
• /
• v.9 no.2
• /
• pp.177-207
• /
• 1992

이 논문(論文)에서는 선도환시장(先渡換市場)에서의 위험(危險)프리미엄의 존재가설(存在假說)을 실증분석(實證分析)하기 위해 분석시간대(分析時間帶), 분석통화(分析通貨), 시계열(時系列) 자료(資料)들을 블럭처리(處理) 하고 시계열분석(時系列分析), 제한(制限) cointegration분석, 회귀모형분석(回歸模型分析) 등의 3가지 큰 범주(範疇)하의 12 가지 분석기법(分析技法)의 반복측정분석(反復測定分析)을 하였다. 검증결과(檢證結果) 각 통화(通貨)마다 분석기법(分析技法)에 대한 위험(危險)프리미엄의 민감도(敏感度)는 상당한 차이(差異)가 발견(發見)되었다. 위험(危險)프리미엄의 분석방법(分析方法)에 따른 결과치(結果値)의 변동리유(變動理由)는 크게 계량추정(計量推定)의 변동(變動)에 기인(基因)한 부분(部分)과 위험(危險)프리미엄 측정(測定)의 이론적(理論的) 모형(模型)의 상이(相異)에 의한 부분, 분석기법(分析技法)의 위험(危險)프리미엄 조건(條件)의 차이(差異)에 의한 변동(變動)부분으로 나누어 짐을 알 수 있었다. 이상의 발견점(發見点)이 시사(示唆)하는 바는 위험(危險)프리미험의 연구(硏究)에 있어서 상기(上記) 세가지 방향(方向)으로 더욱 깊은 연구(硏究)가 행하여 질수 있음을 알 수 있다. 각 연구(硏究) 방법(方法)의 비교(比較) 평가(評價)에서는 구체적인 실증분석(實證分析) 후 각 연구방법(硏究方法)들의 장단점(長短點)들이 논의(論議)되어진 바, 이들 방법(方法)이 서로 상호대체적(相互對替的)이 아니고 상호보완적(相互補完的)임을 알 수 있었다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.24-35
• /
• 1995

In this paper, we study the Spectrum Use Measure(SUM) model for quantifying the extent of spectrum use by existing radio communication systems. This model calculates the interference level between transmitters and receivers by applying the EMC analysis technique of interference prediction process such as antenna radiation pattern model and propagation model which are well known. While several previous works have described the spectrum resources by constructing the interference contours around existing radio systems, the SUM technique is developed for quantifying and portraying the spectrum resources used by radio communication systems in a geographic area. Computer simula- tion results are illustrated to verify the calculations for the Spectrum Use Bandwidth(SUB) and Spectrum Use Factor (SUF) performed by the SUM model and find the usefulness of the SUM model.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.361-382
• /
• 2007

As the Korea's economy grows bigger and its industrial structure advances, demands of high quality product become increasing. And the technology becomes to be more important factor than labor power and capital. And, the development of technology plays the key role in promoting the competitiveness of a nation. Measurement means 'Measuring with instrument', dissemination of measurement standards related with dissemination and distribution of measuring instrument. Measurement technology has been known to be the main factor of economic growth and technological development. National measurement standards is one of these factors of measurement technology. Therefore, in order to enhance dissemination of measurement standards to industry, we have to define its economic impact. We analysed the economic impact of measurement standards in terms of its contribution to the product induction of industry and management results using I-O Table with the quantitative data. The results from this study show that the increasement of measurement standards dissemination is in complementary relation with the productivity of various industries, assembly manufacturing, in particularly.

• Journal of the Korean Society for information Management
• /
• v.28 no.3
• /
• pp.295-312
• /
• 2011

This study conducted time-series analysis on domestic studies related to entrepreneurship for more than last 50 years by integrating the co-word analysis method of intellectual structure analysis into the study of entrepreneurship. The co-word analysis method is a quantitative analysis method to analyze the overall trend of the study and further study topics by visualizing the information between study topics and arranging the topics on two-dimensional plane and the study result showed largely four phases and the direction of the study path. According to the analysis, the study is started at embryonic study phase(third quadrant), the study topic of independent study phase(second quadrant) is a phase to be a settled independent area as a study and the topics of the study include topics of the study reflecting the situation of the times. At growing study phase(first quadrant) study topics which are closely related to the study topic are arranged, and the topics, the center of the study, are positioned at the study topics of maturity phase(4th quadrant).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.443-446
• /
• 2003

This paper implement Remote Meter Reading System which is used Bluetooth and SMS in CDMA. This System propose system which tan detect a total amount of gas, electricity or water without a meterman, at home BlueTooth is a close range wireless communication technology which uses a wireless frequency 2.4GHz and has a high trust and self error correction technology according to a low power consumption quality and a high-speed frequency hopping. This makes get a high trust concerning a data transmission than an existing modem. In addition, though wireless modem is restricted by a minimal of a wireless terminal, it will be possible to coincide with the function of the portable with the low power consumption quality by using Bluetooth. And as the system on a chip of module progresses, the possibility of the small size is present. Nowadays, SMS Protocol in CDMA for have a network function based on PPP in CDMA Phone. The proposed Remote Meter Reading System to get more nobility, efficiency, and have good function. SMS Protocol in CDMA have profits which is low power, low cost, and low microwave output.

• Journal of Korean Library and Information Science Society
• /
• v.47 no.1
• /
• pp.217-242
• /
• 2016

To investigate the characteristics of Korean researchers who have published journal articles in the international Library and Information Science (LIS) journals, we analyzed the types of institutions of the authors and their disciplines by publication year and journal type. Specifically, we analyzed 819 pieces of author information from 384 articles published between 2005 and 2014 in 31 journals using the existing categories, allowing comparisons of research trends between past and current and between Korean and international researchers. In addition, we used a co-authorship credit allocation method to calculate the credits of individual authors in an accurate manner, and found that 342.6 of 384 papers were contributed by solely Korean researchers. We demonstrated that the internationality and quality of Korean LIS research has increased during this time. In particular, authors who were affiliated with universities took the lead in publishing papers, and we presented that the nature of research might be related to the type of author affiliation. Based on the disciplinary backgrounds of the researchers, we also suggest that LIS research is associated with such disciplines, computer science, management, and communications.

• Journal of Information Management
• /
• v.40 no.4
• /
• pp.135-150
• /
• 2009

Existing bibliometric laws have been established on the basis of well defined science journals with a long history. However, the history of technology innovation research in Korea is young and the scope of the research is diverse compared with other fields. The main purpose of this research can be summarized as follows : Can the traditional bibliometric laws be used to explain the young and diverse data derived from technology innovation studies in Korea. Second, we want to compare the explain ability of the power law, compared with the traditional laws in the field. Third, we propose a quasi index related to the well-known impact factor to measure the contribution of a journal or a group of journals to the development of innovation research in Korea. We confirmed Lotka's and Bradford's laws which are used to measure the productivity of researchers, but we could not support the validity of Price's Square Root law as Nicholls (1998) could not. On the citations to journals, Garfield's laws is not observed. However, the power law fits well the citations to author, journal, article, and book. The estimated parameters between 1.6 and 3.5 are similar to the values in the range of 1.5 and 3 in previous studies. Finally the quasi index shows that the influence of international leading journals on innovation research in Korea is weaker than on innovation studies in the world.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.815-824
• /
• 2013

Traditional Pearson chi-squared test is not appropriate for the data collected by the complex sample design. When one uses the traditional Pearson chi-squared test to the complex sample categorical data, it may give wrong test results, and the error may occur not only due to the biased variance estimators but also due to the biased point estimators of cell proportions. In this study, the design based consistent Wald test statistics was derived for k-population homogeneity test, and the traditional Pearson chi-squared test statistics was partitioned into three parts according to the causes of error; the error due to the bias of variance estimator, the error due to the bias of cell proportion estimator, and the unseparated error due to the both bias of variance estimator and bias of cell proportion estimator. An analysis was conducted for empirical results of the relative size of each error component to the Pearson chi-squared test statistics. The second year data from the fourth Korean national health and nutrition examination survey (KNHANES, IV-2) was used for the analysis. The empirical results show that the relative size of error from the bias of variance estimator was relatively larger than the size of error from the bias of cell proportion estimator, but its degrees were different variable by variable.

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.86-94
• /
• 2001

기존의 광중합기는 높은 광강도를 제공함으로써 광중합 복합레진을 최대한 단축된 시간내의 중합을 목표로 하였다. 이러한 높은 광강도는 복합레진의 중합깊이, 중합률면에서는 우수하나 중합 반응속도가 빠름으로 인해 중합시 응력 발생이 높아진다는 일련의 보고가 있다. 최근에는 광중합 속도를 늦춤으로써 변연적합도 및 중합시 응력 발생을 낮추는 새로운 중합방법들이 제시되고 있다. 이에 본 실험에서는 광조사 강도의 변화가 광중합 복합레진의 중합반응 과정에 미치는 영향 및 중합된 복합레진의 중합률에 대한 영향을 분석하고자 하였다. 5개의 혼합형 광중합 복합레진 (Z-100, Spectrum, Z-250, Clearfil AP-X, P-60)을 사용하였으며 중합시 적용된 광조사 강도에 따라 6개의 실험군으로 정의하였다. 실험군과 이에 따른 광조사 방법은 다음과 같다. 1군은 110mW/$\textrm{cm}^2$로 40초 중합, 2군 210mW/$\textrm{cm}^2$로 40초 중합, 3군 410mW/$\textrm{cm}^2$로 40초 중합, 4군 620mW/$\textrm{cm}^2$로 40초 중합, 5군 110mW/$\textrm{cm}^2$로 10초 중합 후 1분 뒤 620mW/$\textrm{cm}^2$로 30초 중합, 6군 210mW/$\textrm{cm}^2$로 10초 중합 후 1분 뒤 410mW/$\textrm{cm}^2$로 30초 중합하였다. 광중합시 중합 반응 양상에 관한 분석은 시차주사 열계량기를 이용하여 37$^{\circ}C$ 항온상태에서 10분간의 열흐름곡선을 기록하였다. 기록된 열흐름곡선에서 중합 반응시 나타나는 중합열 및 최대 중합열에 이르는 시간을 기록하여 중합반응 속도를 측정하였다. 중합된 복합레진의 중합률은 Fourier Transform Infrared Spectrometer(FTIR)를 이용하였으며 2mm 두께의 복합레진 하방에서의 중합률을 측정하였다. 측정된 결과는 ANOVA 및 Student-Newman-Keuls 방법을 이용하여 유의성을 검증하였다. 실험결과 다음과 같은 결론을 얻었다. 1. 광중합 복합레진 중합시 광조사 강도가 증가할수록 중합열은 증가하였으나 통계적 유의성은 보이지 않았다 (p>0.05). 2. 최대 중합열에 이르는 시간은 광조사 강도가 증가할수록 단축되었다. 이단계 중합방법을 사용한 경우 중합반응 속도를 감소시킬 수 있음을 보였다. 3. 광조사 강도가 증가할수록 중합률은 증가하였다. 이단계 중합방법을 사용한 경우 연속적인 고광강도를 사용한 경우와 유사한 높은 중합률을 보였다. 4. 중합률면에서 광중합복합레진의 중합시 400mW/$\textrm{cm}^2$ 이상의 광강도가 필요한 것으로 나타났다.