• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.249-255
• /
• 2013

Hydroxypropyl terminated PDMS was synthesized by the hydrosilylation reaction with allyl alcohol in the presence of Karstedt's catalyst. And them, an one-pot reaction with HDI isocyanurate trimer and hydroxyethyl methacrylate was conducted to give a silicone-modified urethane acrylate oligomer (PUA oligomer) having 9000 g/mol, weight average molecular weight. The synthesized PUA oligomer was characterized by using FT-IR and GPC. The UV-curable coatings were prepared by PUA oligomer blending with a reactive monomer (phenylthioethyl acrylate) under the different mole ratios. It was found that the refractive index of cured film increased when the reactive monomer was added but there was no relationship between the refractive index and amount of reactive monomer. Also, their transmittance for cured films was not change as increasing the content of reactive monomer.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.53-57
• /
• 2012

A latent curing system was necessary for the anisotropic conducting film (ACF), and a fast reaction system was also necessary to fast production. In this study, the benzylsulfonium salts were synthesized and were used as latent curing initiators for epoxy resin. These benzylsulfonium compounds exhibited a long shelf life with epoxy resin. The curing behaviors of an epoxy resin with these sulfonium salts were investigated using differential scanning calorimetry (DSC), and the curing times were determined at $150^{\circ}C$ using an indentation method.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.237-240
• /
• 2000

본 연구에서는 비스페놀 A, 에피크로로히트린을 반응시킨 에폭시 기본주제를 중심으로 경화제, 희석제, 충진제, 촉매 등을 배합하여 토목, 건축용 반고체형 에폭시 접착제를 개발하였다. 여기서 특히 에폭시 주제와 희석제의 종류 및 배합비율에 따른 기본 물성, 접착성능 등을 측정하였다. 상온 경화 특성을 측정하기 위하여 경화시 간을 측정한 결과 희석제의 종류와 관계없이 희석제의 양이 증가할수록 경화시간이 증가하고 경화온도도 증가하는 경향을 알 수 있었으며 촉매의 양이 적을 경우가 경화시간이 빠른 것을 알 수 있었다. 또한 경화 시간은 30분 내지 40분 정도로 상온에서 사용할 수 있을 것으로 기대한다. 접착력 시험 결과는 촉매의 양이 적당한 때 가장 좋은 접착력을 나타내고 희석제 중에서 HDGE의 경우가 가장 좋은 접착력을 나타내었고 희식제의 양이 증가할수록 접착력은 증가하였다. 실리카와 철분을 섞어 반고체형 에폭시 접착제를 제조한 경우 기존의 제품보다 우수한 접착력을 나타내었다. 따라서 본 연구에서 개발한 반고체형 접착제는 제조공정 코스트 등에 대한 검토와 함께 제품화하여 토목, 건축 분야의 콘크리트 균열 접착, 볼트와 콘크리트의 접합, 목재의 접합 등에 간편하게 사용될 수 있으며, 배합물질과 비율에 따라 전기전자. 토목건축, 자동차산업 등의 산업용 접착제로서 응용될 수 있을 것으로 기대된다.

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.101-102
• /
• 2013

시멘트 및 건설산업은 그 제조과정에서 다량의 이산화탄소를 배출하기 때문에 지구온난화 문제를 가속화시키고 있는 것으로 알려져 있다. 따라서 이러한 시멘트를 대체할 수 있는 재료 개발에 많은 연구가 이루어지고 있으며, 철강산업 부산물인 고로슬래그 미분말은 그 중 하나의 재료라 할 수 있다. 고로슬래그 미분말은 물과 직접 반응하지 않으나 알칼리 환경하에서는 물과 반응하여 CSH 수화물을 생성하게 된다. 본 연구에서는 알칼리 자극제를 첨가한 경우의 무시멘트 경화체에 대한 강도 및 수화 특성에 대하여 분석하고자 하였다.

• Composites Research
• /
• v.18 no.4
• /
• pp.14-20
• /
• 2005

To determine the effect of chemical structure of aromatic amino curing agents on thermal and mechanical properties, standard epoxy resin DGEBF (diglycidylether of bisphenol F) was cured with diaminodiphenyl methane (DDM) and diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work the effect of aromatic amino curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure of curing agents. In contrast, the results show that the DGEBF/DDS system having the sulfone structure between the benzene rings had higher values in the thermal stability, density, shrinkage ($\%$), thermal expansion coefficient, tensile modulus and strength, flexural modulus and strength than the DGEBF/DDM system having methylene structure between the benzene rings, whereas the DGEBF/DDS system presented low values in maximum exothermic temperature, conversion of epoxide, and grass transition temperature. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property. The result of fractography shows that the grain distribution of DGEBF/DDS system is more irregular than that of the DGEBF/DDM system.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.78-89
• /
• 2001

Morphological changes of unsaturated polyester/polyvinylacetate semi-IPN were studied while the phase separation and the cure reaction occurred in a competing fashion. The light scattering and thermal analysis techniques were used to investigate the phase separation rates and mechanical properties resultantly induced by molecular diffusion of thermoplastic polymer during the curing process of thermosetting polymer. The reaction activation energy was calculated by using Flynn-Wall method and the semi-IPN structure exhibited various phase-separation morphological characteristics. When PVAc composition was 10 wt%, the phase separation was not observed during the curing reaction, but the phase separation occurred in a similar fashion to nucleation and growth(NG) mechanism at room temperature. On the other hand, when PVAc composition was over 11.65 wt%, the phase separation was generated in the middle of the curing process. Consequently, the phase separation seemed to influence the curing reaction rate, which was also supported by the changing activation energy with conversion and PVAc composition. Finally, the total scattered intensity was measured at various temperature, and subsequently the diffusion rates of phase separation R(${\beta}m$) were evaluated.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.95-100
• /
• 1993

Abstract Fourier transform infrared (FT -IR) instrument was used to st.udy the thermoset behavior of DGEBA/MDA system with succinonit.rile. That was experimented with the samples which were cured from 8$0^{\circ}C$ to 17$0^{\circ}C$ every 3$0^{\circ}C$ for 1 hour and uncured with different SN content. respect.ively. It was known that prImary amine hydrogen reacted wit.h epoxide group, secondary amine hydrogen with epoxide group and hydroxyl with epoxide group. In addition. the reaction of primary amine hydrogen with nitrile gorup of SN and of hydroxyl group with nitrile group of SN came about. These t.wo reactions made chain bond length longer between main chains.

• Composites Research
• /
• v.14 no.2
• /
• pp.1-7
• /
• 2001

The studies on the formulation and curing behaviors of Kevlar/Epoxy prepreg for NOSE CONE of aircraft were presented in this paper. Dielectrometer and differential scanning calorimeter were used in order to check the curing behaviors. This prepreg showed the lowest ionic viscosity around $120^{\circ}C$, and then the ionic viscosity was gradually increased up to $200^{\circ}C$. This indicated that the curing reaction of this prepreg started at $120^{\circ}C$ and the molecular weight was increased by the accelerated thermal cross-linking reaction. The loss factor and tan $\delta$ values were also measured and discussed. The loss factor behaviors of Kevlar/Epoxy prepreg, which is related to the fluidity of matrix, were fecund to be similar with that of ionic viscosity. The thermal reaction properties of this prepreg were also studied by differential scanning calorimeter.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.121-126
• /
• 2013

UV-curable high refractive index di-functional epoxy acrylate, 4,4'-thiodibenzenethiol diglycidyl ether diacrylate, was synthesized from acrylic acid and 4,4'-thiodibenzenethiol diglycidyl ether that was obtained by reacting 4,4'-thiodibenzenethiol and epichlorohydrin using a direct method (Taffy process). Its chemical structure was identified by $^1H$ NMR and FTIR. After its dilution with a reactive diluent, 2-phenoxythiol ethyl acrylate as 5, 10, 15, 20, and 30 wt% content, the relationship between their viscosity and refractive index was investigated. Their degree of cure decreased with increasing the amount of reactive diluent, and the refractive index of UV-cured film increased with increasing the degree of cure.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.392-399
• /
• 2013

The purpose of this study is to identify the manufacturing possibility of non-cement mortar using blast furnace slag and alkali accelerator. In this experimental study, the blast furnace slag which is the by-product of the steel industry substitute for cement, and the potassium hydroxide(KOH), calcium hydroxide ($Ca(OH)_2$) and sodium hydroxide(NaOH) as stimulus were added to each specimen. And the analysis on reaction property of non-cement mortar was conducted by measurement such as flexural and compressive strength, XRD, EDS and SEM. From the test results, it can be founded that $SiO_2$ and CaO included in the blast furnace slag are released and make the calcium silicate hydrate like the hydration reaction of the cement. Also, the continued study is need to reduce emission of $CO_2$ because of major content in filed of the building construction.