• The korean journal of orthodontics
• /
• v.2 no.1
• /
• pp.7-14
• /
• 1971

저자는 한국인 정상교합에 있어서 상하악 전치의 위치가 ANB각과 어떠한 상관관계가 있는지 그리고 전치의 위치가 돌출도와 경사도와 상관관계가 있는 지를 조사 연구하기 위하여 $20\~24$세 연령의 남자 54명, 여자 56명 합계 110명의 한국인 정상교합의 측모두부 X-선사진을 사용 분석했다. 이의 통계분석은 Computer 과정을 거쳤으며 다음과 같은 결과를 얻었다. 1. 상하악 전치 경사는 ANB각과 밀접한 상관관계가 있고, 상악전치의 위치는 ANB각에 (-)상관관계 하악전치의 위치는 ANB각에 (+) 상관관계가 있으며 이는Steiner 분석법의 acceptable compromise에서 보여준 것과 유사한 경향을 나타냈다. 2. 상악전치 경사는 상악돌출도와 (-) 상관관계가 있다. 3. 1-NA각은 상악경사도와 상호독립적이다. 4. 1-NA각은 하악돌출도와 하악경사도와 의의있는 상관관계를 나타냈다. 5. 1-NA거리와 상악경사도와의 상관관계는 여성군에서만 의의있는 것으로 나타났다. 6. 하악전치치축경사는 하악돌출도와 하악경사도와는 남성군에서만 상관관계가 있고 여성군에서는 의의가 없는 것으로 나타났다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.369-375
• /
• 2010

Since multi-view images can be utilized for 3D visualization and surveying as well, a system calibration is an essential procedure. The cameras in the system are mounted to the holder and their locations and attitudes are relatively fixed. Therefore, the locations and the attitudes of the perspective centers of the four oblique looking cameras can be calculated using the location and attitude of the nadir looking camera and the boresight values between the cameras. In this regard, this research is focusing on the analysis of the relative location and attitude between the nadir and oblique looking cameras based on the results of the exterior orientation parameters after the aerial triangulation of the real multiview images. We acquired high standard deviations of the relative locations between the nadir and oblique cameras. Standard deviations of the relative attitudes between the cameras were low when only the exterior orientations of the oblique looking cameras were allowed to be adjusted. Moreover, low standard deviations of the relative attitudes came when we considered not all the exterior orientations of the cameras but the attitudes of them only.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.10-18
• /
• 2019

In this study, flow characteristics and the starting pressure of a center body diffuser (CBD) were analyzed at various center body (CB) positions and cone angles. According to the CB position, the location of oblique shock moved to the front from behind the CB cone with an increase in the flow momentum. Additionally, when a strong oblique shock occurred, the direction of supersonic flow was affected and induced to diffuser wall. As a function of different cone angles for the oblique shock, the starting pressure of the CBD was significantly affected.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.21-32
• /
• 2010

The convergence angle of a prepared tooth is a very important factor in the retention and resistance of a crown restoration. But various intraoral environments and clinician's techniques make it difficult to obtain the ideal inclination. Therefore, in this study, clinical convergence angle of a prepared tooth was investigated. The data was collected from the patient models of prosthodontic residents and the patient models of general practitioners. The images of mesiodistal and buccolingual surfaces were taken with a digital camera to evaluate the convergence angle on 'ImageJ' program. The images were classified according to the criteria (1. Clinician group, 2. Position in the dental arch, 3. The purpose of abutment preparation)and then analyzed. The mean convergence angle of a prepared tooth for Korean clinicians was $15.02^{\circ}$ (${\pm}10.13^{\circ}$). 1. It was significant in the convergence angle between the general practitioner group and the prosthodontic resident group(p<0.05). 2. It was significant between the mesiodistal and buccolingual surface in the the prosthodontic resident group(p<0.05). 3. For the general practitioner group, it was significant when anteriors and premolars were compared with molars(p<0.05). For the prosthodontic resident group, it was significant when anteriors and premolars were compared with molars (p<0.05). 4. When divided into upper and lower arches, for the general practitioner group, it showed significant difference in the buccolingual aspect(p<0.05). Also in the prosthodontic resident group, it showed significant difference in the buccolingual aspect(p<0.05). 5. Dividing left and right sides of the arches, there was no significant difference in the general practitioner group and the prosthodontic resident group(p>0.05). 6. In the general practitioner group, it was significant in the mesiodistal axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). In the prosthodontic resident group, it was significant in the mesiodistal and overall axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). Clinical convergence angle of prepared tooth in Korea was included in agreement with other studies investigating convergence angle that ranged from 10 to 22 degrees, achieved in clinical practice.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.117-120
• /
• 2004

This paper is to investigate theoretically position fixing by using gyroscopic inertia of free gyroscope. with respect to a reference position or starting point, the changes of the inclination angle of the spin axes and the elapsed time are taken a measurement. By using the two basic factors like changes of angles a position is fixed.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.653-657
• /
• 2004

The authors aim to design further an upgraded and self-contained position fixing system to meet the future commercial requirements. As a first step this paper is to investigate the theoretical structure of position fixing based on the nature of free gyro, in which the tilt angles of the two spin axes at an arbitrary position are measured respectively and the elapsed time with respect to a reference position or starting point is observed And it illustrates some limitations to be expected in this system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.402-411
• /
• 1993

비디오 주행계의 안정성에 영향을 주는 인자들은 많이 있다. 그중 수직포스트의 경사각은 수직포스트를 지나는 테이프의 주행높이 변동에 영향을 주기 때문에 비디오 데크의 조립상에서 수직포스트의 경사각을 관리하는 것이 비디오 주행계의 안정성을 확보하는데 있어서 필요하다. 특히 비디오 데크의 조립시 수직 포스트의 경사각을 어느정도까지 허용해도 비디오 주행계의 안정성에 영향을 주지 않는지 알때 비디오 데크의 주립시 보다 효과적인 조립공정의 관리가 이루어 질 것으로 사료된다. 본 연구에서는 수직포스트의 경사각에 대한 허용오차를 결정하는 방법과 이에 따르는 다음 포스트들이 세워져야 할 위치를 결정하는 방법을 제시하였는데 이를 위하여 기구학과 통계적인 방법을 사용하였다.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.548-556
• /
• 2009

In order to evaluate applicability of rock cut-slope investigation system, typical clinometer and photogrammetry investigation system were used for rock slopes; first for 7 discontinuities, and secondly, 10 discontinuities, and the results were compared. The first verification was performed depending on discontinuity joint shapes and slope angles, and the second verification was performed depending on shot time and shot locations. The results showed that differences of dip direction $1^{\circ}{\sim}4^{\circ}$, dip $0^{\circ}{\sim}4^{\circ}$. In the second verification test, the differences of dip direction was $0^{\circ}{\sim}6^{\circ}$, and dip $0^{\circ}{\sim}6^{\circ}$. The photogrammetry method for rock slope survey system is quite reliable when clinometer generally shows ${\pm}10^{\circ}$ errors due to surface roughness and investigator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2428-2435
• /
• 2014

Numerical analysis with ALE (Arbitrary Lagrangian Eulerian) Adaptive Meshing technique was performed to evaluate the pullout capacity of the embedded suction anchors (ESA) in uniform clay. The numerical method was verified by the previous study, analytical results based on limit-equilibrium theory and centrifuge tests. The pullout capacity of the ESA under horizontal, vertical, and inclined loading were evaluated, and the effect of initial rotation of the ESA on pullout capacity was also investigated. The analysis results showed that the maximum horizontal capacity was obtained at the mid-point, and the each vertical capacity gave the similar value regardless of the loading points. Furthermore, the inclined capacity was decreased as the load inclination angle increased at the mid-point of the anchor, and almost the same pullout capacity was obtained when the initial rotation angles were below 30 degrees.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.506-510
• /
• 2009

대수층내의 담수-염수 경계면의 위치와 기울기를 파악하는 것은 해안가의 지하수 개발을 위해 선행되어야 하는 연구이다. 가로 140 cm, 세로 70 cm의 사각형 수조에 모래를 채운 모래염수조를 이용하여 포화된 다공질 매체에서 형성되는 담수-염수 경계면을 모의하였다. 다공질 매체의 입자크기에 따른 수리전도도, 해안가 지형의 지표경사, 해수의 염도에 대한 조건을 각기 달리하여 여러 실험조건에서 각 경우에 따라 형성되는 경계면의 형태를 모의하였고, 각 인자가 경계면의 형성에 어떠한 영향을 미치는지를 분석하였다. 각 조건에 따른 총 31가지의 실험을 수행하였으며, Glover 포텐셜 유도식을 이용한 염수침투 경계면을 비교하였다. 모형에서 측정된 염수침투 경계면은 위의 이론식들의 계산치와 유사한 양상을 보였으며, 경계면의 위치와 기울기는 수리전도도, 지표면경사, 염도에 영향을 받는 것으로 나타났다.