Abstract
In order to evaluate applicability of rock cut-slope investigation system, typical clinometer and photogrammetry investigation system were used for rock slopes; first for 7 discontinuities, and secondly, 10 discontinuities, and the results were compared. The first verification was performed depending on discontinuity joint shapes and slope angles, and the second verification was performed depending on shot time and shot locations. The results showed that differences of dip direction $1^{\circ}{\sim}4^{\circ}$, dip $0^{\circ}{\sim}4^{\circ}$. In the second verification test, the differences of dip direction was $0^{\circ}{\sim}6^{\circ}$, and dip $0^{\circ}{\sim}6^{\circ}$. The photogrammetry method for rock slope survey system is quite reliable when clinometer generally shows ${\pm}10^{\circ}$ errors due to surface roughness and investigator.
암반절취사면의 지질구조를 측정하기 위하여 개발된 조사시스템의 현장 적용성을 겸토하기 위하여 절취사면에 대해 클리노 컴퍼스와 조사시스템을 이용하여 암반 불연속면을 1차 7개, 2차 10개를 측정하여 그 결과를 비교하였다. 1차 시험은 불연속면의 절리형태와 경사각에 따른 측정 결과 값의 차이를 비교하였고, 2차 시험은 촬영 시간과 촬영위치를 달리하여 비교분석하였다. 비교 결과 1차 시험은 클리노 컴퍼스로 측정한 값과 경사방향 $1^{\circ}{\sim}4^{\circ}$, 경사각 $0^{\circ}{\sim}4^{\circ}$의 차이를 보였고, 2차 시험은 경사방향 $0^{\circ}{\sim}6^{\circ}$, 정사각 $0^{\circ}{\sim}6^{\circ}$의 차이를 보였다. 일반적으로 클리노 컴퍼스를 활용한 암반 불연속면 조사시 표면상태가 고르지 않고 측정위치에 따른 경사방향과 경사각의 차이가 ${\pm}10^{\circ}$정도 나타날 수 있다는 점과 측정자의 숙련도에 따른 오차를 감안할 때 본 조사시스템의 정확성에 대한 신뢰도는 비교적 높은 것으로 나타났다.