• Proceedings of the Korea Water Resources Association Conference
• /
• 1998.05a
• /
• pp.62-67
• /
• 1998

낙동강 수계 다목적댐 하류 지역에 대한 홍수조절 의사결정 능력을 향상시키고자 강우- 유출 모형으로 선정된 저류함수법으로 낙동강 수계 다목적댐 하류부의 유역유출 체계를 먼저 구 성하였다. 저류함수법에 의한 낙동강 수계 유역유출 체계도는 유역의 물리적 특성을 감안하여 소 유역은 41개, 하동망은 28개로 구성하였다. 또한 수문학적 하도추적 기법이 갖는 결점을 보완하기 위하여 낙동강 본류 및 상류에 댐이 있는 금호강, 황강, 남강, 밀양강 등 1 지류 이상의 홍수추적 을 수리학적 모형으로 보완하여 유역유출 체계를 이원화하여 두시스템을 상호·연계할 수 있도록 하였다. 상기 두 시스템을 '93년 8월 홍수(8, 7~8, 15)에 시험 적용하였다. 모형수행 경과 홍수기 댐운영시 저류함수모형에 의한 강우 유출 모형과 수리학적 하도추적 모형을 통합한 시스템을 동시에 적용하여 상호 보완 과정을 통해 운영한다면 다목적댐의 홍수조절 의사결정능력을 향상시킬 수 있다고 판단된다. 본 연구에서는 사용자가 해석적 방법으로 유역에서 수문자료를 이용하여 매개변수를 대화식으로 산정할 수 있는 GUI 시스템을 EXCEL97 환경에서 개발하여 신뢰성 있는 Rating curve가 확보 상·하류에 위치한 12개 수위관측소에서 89개 홍수사상을 대상으로 유역의 매개변수를 산정하였다. 또한, 미계측 유역의 저류함수 관련 매개변수 확장을 위하여 12개 소유역 에 대한 매개변수의 평균값과 유역면적, 하도연장 및 경사, 유역의 사면경사 등의 지형인자들을 조합하여 지역화분석을 수행하여 미계측 유역의 매개변수 산정식으로 제안하였다. 본 회귀식으로 산정된 소유역별 매개변수를 '93년 8월 홍수(8, 7~8, 15)에 적용한 결과, 낙동강 수계 본류상 주요 수위관측소별 홍수량예측이 이근천공식 보다 양호한 결과를 주어 본 연구에서 제시한 유역의 매 개변수 회귀식은 미계측 유역의 매개변수 산정시 충분한 활용성을 입증하였다. 저류함수법에 의 한 낙동강 수계 다목적댐 하류부의 유역유출 체계도는 수리학적 하도추적 모형과의 연계와 유역 의 물리적 특성을 감안하여 현재의 홍수통제소에서 운영하는 홍수예경보 시스템의 유출체계도와 우리공사 물관리 상황실의 저수관리 모형의 유출체계도를 기준으로 재구성하여 다목적댐 하류부의 소유역은 41개, 하도망은 28개로 결정하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.27-37
• /
• 2021

The use of additive manufacturing processes for the repair and remanufacturing of mechanical parts has attracted considerable attention because of strict environmental regulations. Directed energy deposition (DED) is widely used to retrofit mechanical parts. In this study, finite element analyses (FEAs) were performed to investigate the influence of the substrate phase and inclination angle on the heat transfer characteristics in the vicinity of Hastelloy X regions deposited via DED. FE models that consider the bead size and hatch distance were designed. A volumetric heat source model with a Gaussian distribution in a plane was adopted as the heat flux model for DED. The substrate and the deposited powder were S45C structural steel and Hastelloy X, respectively. Temperature-dependent thermal properties were considered while performing the FEAs. The effects of the substrate phase and inclination angle on the temperature distributions and depth of the heat-affected zone (HAZ) in the vicinity of the deposited regions were examined. Furthermore, the influence of deposition paths on depths of the HAZ were investigated. The results of the analyses were used to determine the suitable phase and inclination angle of the substrate as well as the appropriate deposition path.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.159-166
• /
• 2003

In this study, we develop a finite element model to directly solve the Laplace equation while keeping the same computational efficiency as the models based on the extended mild-slope equation which has been widely used for calculation of wave transformation in shallow water. For this, the computational domain is discretized into finite elements with a single layer in the vertical direction. The velocity potential in the element is then expressed in terms of the potentials at the nodes located at water surface, and the Galerkin method is used to construct the numerical model. A common shape function is adopted in horizontal direction, and the cosine hyperbolic function in vertical direction, which describes the vertical behavior of progressive waves. The model was developed for vertical two-dimensional problems. In order to verify the developed model, it is applied to vertical two-dimensional problems of wave reflection and transmission. It is shown that the present finite element model is comparable to the models based on extended mild-slope equations in both computational efficiency and accuracy.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.70-78
• /
• 1997

3Y-TZP/SUS316 Functionally Graded Material (FGM) was fabricated by slip casting method. Alumina mold was used to overcome problems of gypsum mold in slip casting process, and the optimal dispersion con-ditions of 3Y-TZP/SUS316 binary slurries was determined using electrokinetic sonic amplitude and a viscometer, and observing sedimentation behavior. The properties of the specimens casted by gypsum mold and alumina mold were compared in terms of changes in shrinkage rate, drying and sintering conditions, and microstructure. It was found that the specimens obtaine from the alumina mold showed a clean surface, easier thickness control of each layer, and higher productivity. Especially, no degradation was observed in the SUS316 prepared using alumina mold. Thus it is desirable to use porous alumina mold rather than gyp-sum mold for the slip casting of 3Y-TZP/SUS316-FGM.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.1
• /
• pp.27-32
• /
• 2008

Purpose : We developed a 3D CSI (chemical shift imaging) sequence that uses the PRESS (point resolved spectroscopy) excitation scheme and spiral-based readout gradients. Materials and Methods : We implemented constant-density spirals ($32{\times}32$ matrix, $24{\times}24\;cm$ FOV) which use analytic equations to enable real-time prescription on the scanner. In-vivo data from the brain were collected and reconstructed using the gridding algorithm. Results : Data illustrate that with our imaging sequence, the benefits of the PRESS technique, which include elimination of lipid artifacts, remain intact while flexible scan time versus resolution tradeoffs can be achieved using the constant-density spirals. Volumetric high resolution 3D CSI covering 5760 cm3 could be obtained in 12.5 minutes. Conclusion : Spiral-based readout gradients offer a flexible tradeoff between scan time versus resolution. By combining this feature with PRESS based excitation, efficient methods of volumetric spectroscopic imaging can be accomplished by obtaining whole brain coverage while eliminating lipid contamination.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.329-329
• /
• 2011

제방은 하천의 범람으로부터 제내지의 인명, 가옥, 재산, 각종 시설 등을 보호하고 유수의 원활한 소통을 유지하기 위해 하천을 따라 축조한 구조물로서 침식 피해를 방지하기 위해 호안을 설치하도록 규정하고 있다. 호안은 만곡부, 하천 급경사, 지형의 간섭효과 등에 의한 유수의 침입으로부터 제방 및 하안을 직접 보호하기 위해 제방 앞비탈에 설치되는 구조물을 의미한다. 따라서 호안의 안정은 곧 제체의 안정과 직결되는 요소라 할 수 있다. 호안의 안정성은 역학적인 측면에서 외력과 저항력의 크기에 따라 평가할 수 있다. 국내 실무에서 적용되고 있는 호안설계 방법은 하천설계기준 해설(2009)에 제시되어 있으며, 경험과 이론의 양면을 고려하여 설계를 수행하도록 하고 있다. 이로 인해 호안 안정성에 대한 역학적인 검토 방법의 한계 때문에 과대 또는 과소 설계의 우려가 있다. 따라서 호안설계시 유속 및 소류력의 크기에 따른 정량적 평가기법이 요구되는 상황이다. 본 연구에서는 호안의 정량적인 설계기법 개발을 위하여 수리실험을 통해 유속증가로 인한 호안재료의 이탈현상을 재현하였다. 실험수로는 폭 2 m, 길이 25 m, 수로경사 1/300의 직선수로 형태이며 우안의 1:2 경사면에 다양한 크기의 사석과 블록을 차례로 설치하여 실험을 수행하였다. 수리실험은 다른 하상변동 요인이 제한된 고정상으로 수행되었으며 정상류 흐름조건에서 유량을 변화시키며 유속변화 등 흐름현상에 의한 호안재료 이탈을 관찰하였다. 실험결과를 바탕으로 호안설계시 1차원 접근유속을 대표유속으로 적용하는 방법의 특성을 파악하고, 호안재료의 이탈유속과 흐름특성간의 상관관계를 분석하였다. 또한, 호안설계시 입력자료로 사용될 수 있는 단면평균유속과 2차원적 국부유속과의 상관관계를 파악하여 호안의 정량적 설계기법에 활용될 제원결정 경험식을 제안하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.16-22
• /
• 2016

The research on two-wheeled inverted pendulum (TWIP) mobile robots has been ongoing in a number of robotic laboratories around the world. In this paper, we consider a robust controller design for the TWIP mobile robot driving on uniform slopes. We use a 2 degree-of-freedom (DOF) model which is obtained by restricting the spinning motion in a 3 DOF motion dynamic equation. In order to design the robust controller guaranteeing stability of the TWIP mobile robot driving on inclined surface, we propose a sliding mode control based on the theory of variable structure systems and design a sliding surface using the theory of the linear quadratic regulation (LQR). For simulation, the dynamic model of the TWIP mobile robot is constructed using Mathworks' Simulink and the sliding mode control is also implemented using Simulink. From simulation results, we show that the proposed controller effectively controls the TWIP mobile robot driving on slopes.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.255-263
• /
• 1999

The laboratory datas are for local scour depth measurement at vertical-wall abutment. These include the data to demonstrate the effects of local scour depth of abutment nose shape, alignment angle, flow depth and flume slope. The pattern of local scour were measured and analyzed the abutments which are rectangular, sharp, chamfered rectangular and ablong nose shapes. The experiments were carried out with varing the flume slope and alignment algle increasing flow depth every step in 1cm for four abutment types on the live-bed scour conditions. The flume slope and alignment angle were varied in five cases : for latter 30 $^{\circ}$, 60 $^{\circ}$, 90 $^{\circ}$, 120 $^{\circ}$ and 150 $^{\circ}$, for former 0.01%, 0.03%, 0.05%, 0.1% and 0.2%. The maximum scour depths were analyzed for the shaped of abutment nose with rectangular, ablong, chamfered rectangular and sharp in order. The results of the experiments show that the scour depth varies not only with abutment nose shapes and alignment angle but also with the flow depth and flume slope.

• 연구논문집
• /
• s.30
• /
• pp.101-110
• /
• 2000

Weft insertion mechanism is for completing the structure of yarn and weft yarn and its driving method is screw type. In the high speed rapier loom, weft yarn is thrown by insert rapier and carrier rapier into the shed which make divide two parts of upper part ant lower part for warp yarn. It is possible for this mechannism to reduce the size of rapier and wheel, and directly connected to the main shaft without gear belt. Therefore, exact rapier motion through realization of arbitrary acceleration diagram requested rapier and optimal design for high speedization and operating rate increasing are necessary. In this study, with a view to exact system analysis for understanding of overall trace and high speedization of rapier loom through computer simulation. we report not only deduction of displacement, velocity, and acceleration components of rapier for analysis theory establishment, of weft insertion mechanism and exact motion induction according to screw rotation, but also development of simulation program for realization these on the monitor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.35-41
• /
• 1997

A series-fed microstrip array antenna of beamwidth $10^{\circ}$, squint angle $80^{\circ}$ and SLL -15 dB below is designed. Series-fed arrays are formed by interconnecting all the elements by high-impedance transmission lines and feeding the power at the first element and it is a traveling-wave antenna which is terminated with a matched load. Radiation patterns and impedance matching of the antenna are analyzed by Ensemble 4.0, which is a popular software package for designing printed antennas and arrays. The squint angle of beam can be controlled by the spacing between the elements. The major advantages of series-fed array antennas are that feed arangement is compact and the losses associated with the feeding network are less than those of a corporate feed type. The antennas are fabricated on the RT/Duroid Laminates of 62 mil thickness. The experimental results are very close to the specifications to be designed.