• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.239-245
• /
• 2023

Cellulose is an abundant biodegradable material in nature with excellent properties, but due to its poor processability, it has been widely studied for processing through modification. Cellulose acetate propionate (CAP) is a cellulose derivative in which the hydroxyl group of cellulose is replaced by acetyl and propionyl groups. CAP has several advantages, such as excellent solubility, structural stability, light and weather resistance, and good transparency. Porous nanofibers with excellent specific surface area, which can be applied in various fields, can be easily formed by the phase separation method using highly volatile solvents. High speed centrifugal spinning is a nano/micro fiber preparation method with advantages such as fast spinning and easy alignment control. In this study, a CAP/polybutylene succinate (PBS) spinning solution with chloroform as solvent was prepared to prepare porous microfibers and the fiber morphology was examined as a function of the disk rotation speed in an high speed centrifugal spinning device.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.1
• /
• pp.33-39
• /
• 2024

Understanding the behavior of soil under cyclic loading conditions is essential for assessing its response to seismic events and potential liquefaction. This study investigates the effect of non-plastic fines content (FC) on excess pore pressure generation in medium-density sand-silt mixtures subjected to strain-controlled cyclic direct simple shear (CDSS) tests. The investigation is conducted by analyzing excess pore pressure (EPP) ratios and the number of cycles to liquefaction (Ncyc-liq) under varying shear strain levels and FC values. The study uses Jumunjin sand and silica silt with FC values ranging from 0% to 40% and shear strain levels of 0.1%, 0.2%, 0.5%, and 1.0%. The findings indicate that the EPP ratio increases rapidly during loading cycles, with higher shear strain levels generating more EPP and requiring fewer cycles to reach liquefaction. At 1.0% and 0.5% shear strain levels, FC has a limited effect on Ncyc-liq. However, at a lower shear strain level of 0.2%, increasing FC from 0 to 10% reduces Ncyc-liq from 42 to 27, and as FC increases further, Ncyc-liq also increases. In summary, this study provides valuable insights into the behavior of soil under cyclic loading conditions. It highlights the significance of shear strain levels and FC values in excess pore pressure generation and liquefaction susceptibility.

• Microbiology and Biotechnology Letters
• /
• v.38 no.3
• /
• pp.283-288
• /
• 2010

Yam (Dioscorea spp.) has been used as important edible and medicinal natural resource in worldwide and D. alata L. is most popular nourishment among the yam. In this study the composition, color, antioxidation and antimicrobial activity of D. alata Gyeongbuk No. 6 (GB-6), which was established in Gyeongbuk Agricultural Research & Extension Services, Andong, Korea, was compared to those of D. batatas Gyeongbuk No. 1 (GB-1), a major domestic cultivation species. Water content of GB-6 was $78.02{\pm}0.16%$, which is slightly lower than that of GB-1 ($82.6{\pm}0.07%$). The contents of crude protein, crude fat, crude fiber and ash of GB-6 were 0.95, 0.26, 0.85 and 0.70%, whereas those of GB-1 were 1.58, 0.15, 1.39 and 0.88%, respectively. Analysis of color using colormeter showed that the GB-6 is slight dark-yellow than GB-1, and total polyphenol content of GB-6 was 2-fold higher compared than that of GB-1. Sequential organic solvent fractions from methanol extract of GB-6 showed that the ethylacetate fraction has highest total polyphenol ($144.1{\pm}3.20\;mg/g$). Determination of antioxidation activity showed that the ethylacete fraction and water fraction has strong DPPH radical scavenging activity ($IC_{50}=78.32\;{\mu}g/mL$) and reducing power, respectively. In antimicrobial activity assay, the n-hexane and ethylacetate fraction showed antibacterial activity against B. subtilis, L.monocytogenes, S. epidermidis, S. aureus, P. vulgaris, and S. typhimurium. These results provide the possibility of domestic cultivated D. alata GB-6 as a healthy food.

• Journal of the Korean Society of Radiology
• /
• v.83 no.6
• /
• pp.1342-1353
• /
• 2022

Purpose We compared the radiation dose and image quality between the 2nd generation and the 3rd generation dual-source single-energy (DSSE) and dual-source dual-energy (DSDE) CT of the abdomen. Materials and Methods We included patients undergoing follow-up abdominal CT after partial or radical nephrectomy in the first 10 months of 2019 (2nd generation DS CT) and the first 10 months of 2020 (3rd generation DS CT). We divided the 320 patients into 4 groups (A, 2nd generation DSSE CT; B, 2nd generation DSDE CT; C, 3rd generation DSSE CT; and D, 3rd generation DSDE CT) (n = 80 each) matched by sex and body mass index. Radiation dose and image quality (objective and subjective qualities) were compared between the groups. Results The mean size-specific dose estimation of 3rd generation DSDE CT group was significantly lower than that of the 2nd generation DSSE CT (42.5%, p = 0.013) and 2nd generation DSDE CT (46.9%, p = 0.015) groups. Interobserver agreement was excellent for the overall image quality (intraclass correlation coefficient [ICC]: 0.8867) and image artifacts (ICC: 0.9423). Conclusion Our results showed a considerable reduction in the radiation dose while maintaining high image quality with 3rd generation DSDE CT as compared to the 2nd generation DSDE CT and 2nd generation DSSE CT.

• Journal of the Korean association of regional geographers
• /
• v.19 no.2
• /
• pp.246-258
• /
• 2013

The relocation of the public institutions such as the provincial government attracts much attentions since it results in substantial regional economic impacts. In this context this paper analyzes the effects of relocation of Gyeongsangbuk-Do provincial government from Daegu city to Gyeongsangbuk-Do, which is scheduled for 2014, on Daegyeong economic region. Based on the interregional input-output model and I-O data which were provided by the Bank of Korea, this paper examines the multiplier effects of the relocation in terms of production, value added, and employment on Daegyeong economic region and other regions, except for the construction effects of the provincial capital. According to the analysis, the relocation is expected to reduce the production by 290million won, value added by 709million won, and employment by 571 persons in Daegyeong economic region. Also, the relocation turns out to decrease the production by 1,179million won and value added by 123million won of other regions. This paper discusses some policy implications of the analysis.

• Journal of Biomedical Engineering Research
• /
• v.40 no.3
• /
• pp.105-115
• /
• 2019

Brain tumor surgery may be difficult, but it is also incredibly important. The technological improvements for traditional brain tumor surgeries have always been a focus to improve the precision of surgery and release the potential of the technology in this important area of the body. The need for precision during brain tumor surgery has led to an increase in Robotic-assisted surgeries (RAS). One of the challenges to the widespread acceptance of RAS in the neurosurgery is to recognize invisible tumor accurately. Therefore, it is important to detect brain tumor size and location because surgeon tries to remove as much tumor as possible. In this paper, we proposed brain tumor detection procedures for MRI (Magnetic Resonance Imaging) system. A method of automatic brain tumor detection is needed to accurately target the location of the lesion during brain tumor surgery and to report the location and size of the lesion. In the qualitative assessment, the proposed method showed better results than those obtained with other brain tumor detection methods. Comparisons among all assessment criteria indicated that the proposed method was significantly superior to the threshold method with respect to all assessment criteria. The proposed method was effective for detecting brain tumor.

• Journal of The Korean Society of Emergency Medicine
• /
• v.29 no.6
• /
• pp.568-577
• /
• 2018

Objective: Performing high quality cardiopulmonary resuscitation (CPR) is important for improving the survival rate with a good neurological outcome and fewer complications. The retention of accurate CPR knowledge is essential for providing high quality CPR. This study examined the effects of chest compression only CPR training on the retention of correct CPR knowledge. Methods: In December 2016, an interview survey to target the study population was conducted by trained interviewers, using a structured questionnaire. The respondents' general characteristics, status of CPR education, and knowledge and willingness regarding CPR were investigated. Pearson's chi-square tests and multivariate logistic regression analyses were used to determine which education-related factors affected the correct skill knowledge of performing CPR. Results: Among the respondents, there are 80 persons (17.4%) who answered correctly in the questions regarding the skills of performing CPR. The respondents who had a willingness to perform CPR to family and strangers were 90.2% and 44.9% respectively. Through multivariable analysis, the factors related to correct skill knowledge in performing CPR in the didactic with practice group were people who had undergone CPR training within 2 years (odds ratio [OR], 2.293; 95% confidence interval [CI], 1.311-4.009), and person who had undergone chest compression only CPR training (OR, 2.044; 95% CI, 1.033-4.042). Conclusion: Chest compression only type of CPR training and the experience of CPR education within 2 years were associated with accurate skill knowledge of performing CPR.

• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.404-413
• /
• 2023

In this research, we studied the development of a SUS304 microneedle array based on microfabrication technology and the applicability of Parylene-C thin film, a medical polymer material. First of all, four materials commonly used in the field of medical engineering (SUS304, Ti, PMMA, and PEEK) were selected and a 5 ㎛ Parylene-C thin film was deposited. The applicability of Parylene-C coating to each material was confirmed through SEM analysis, contact angle measurement, surface roughness(Ra) measurement, and adhesion test according to ASTM standards for each specimen. Parylene-C thin film was deposited based on chemical vapor deposition (CVD), and a 5 ㎛ Parylene-C deposition process was established through trial and error. Through characteristic experiments to confirm the applicability of Parylene-C, SUS304 material, which is the easiest to apply Parylene-C coating without pretreatment was selected to develop a microneedle array based on CNC micromachining technology. The CNC micromachining process was divided into a total of 5 steps, and a microneedle array consisting of 19 needles with an inner diameter of 200 ㎛, an outer diameter of 400 ㎛, and a height of 1.4 mm was designed and manufactured. Finally, a 5 ㎛ Parylene-C coated microneedle array was developed, which presented future research directions in the field of microneedle-based drug delivery systems.

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.1029-1042
• /
• 2023

This study aimed to apply the technology of increasing the volatile aromatic compounds in wine through mixed fermentation of Saccharomyces cerevisiae and non-Saccharomyces yeasts to make distilled soju. The expectation was to induce changes in metabolites such as volatile aromatic compounds before the distillation process, followed by concentrating these compounds through distillation to enhance the odor property of distilled soju. Additionally, the study aimed to examine the impact of mixed fermentation with S. cerevisiae and non-Saccharomyces yeasts on distilled soju's free amino acid content. As a result, when Hanseniaspora uvarum yeast was used, there was an increase in the content of low molecular weight volatile aroma compounds, particularly esters. Distilled soju co-fermented with S. cerevisiae and H. uvarum SJ69 exhibited similar amino acid content to distilled soju single-fermented with S. cerevisiae. However, distilled soju co-fermented with S. cerevisiae and H. uvarum S6, a decrease in amino acid content. Sensory evaluation results indicated a higher odor score in distilled soju co-fermented with S. cerevisiae and H. uvarum S6, suggesting that the mixed fermentation technology utilizing H. uvarum could contribute to improving the quality of distilled soju in the future.

• The Science & Technology
• /
• v.29 no.3 s.322
• /
• pp.86-87
• /
• 1996

경북대 내에 자리한 센서기술연구소는 센서관련 연구기관으로 유일한 곳이다. 현재 21개 대학에서 53명의 교수가 함께 참여하고 연구원만 3백40명이 포진하고 있는 이 센서기술연구소의 산학협동은 성공적인 사례로 손꼽히고 있다.