• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1676-1686
• /
• 2021

In this paper, we propose a general cross-chain solution based on the idea of modularity, abstraction, and layering, which decoupling the cross-chain function from the consensus algorithm and specific application logic, and utilize a Merkle proof to ensure the validity and legality of cross-chain operations. Since the underlying implementations of homogeneous and heterogeneous blockchains are different, we treat them separately. For homogeneous blockchains, we suggest a TCP-like cross-chain transport protocol (CCTP). While for heterogeneous blockchains, we present a method to construct the relay chain to realize the cross-chain function. The proposed scheme can enable the correct, effective, reliable, orderly, and timely transmission of cross-chain data. However, the essential difference between the operations within a single blockchain and the interoperability between different blockchains is that the trust domain is different. Cross-chain interoperation itself breaks the completeness of the blockchain, therefore, some efficiency and safety must sacrifice to trade-off.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.39-48
• /
• 2011

The present investigation evaluates the flexural behavior of pre-tensioned lightweight concrete beams under two-point symmetrical concentrated loads according to the variation of the partial prestressing ratio and the effective prestress of prestressing strands. The designed compressive strength of the lightweight concrete with a dry density of 1,770 $kg/m^3$ was 35 MPa. The deformed bar with a yield strength of 383 MPa and three-wire mono-strands with tensile strength of 2,040 MPa were used for longitudinal tensile reinforcement and prestressing steel reinforcement, respectively. According to the test results, the flexural capacity of pre-tensioned lightweight concrete beams increased with the increase of the partial prestressing ratio and was marginally influenced by the effective prestress of strands. With the same reinforcing index, the normalized flexural capacity of pre-tensioned lightweight concrete beams was similar to that of pre-tensioned normal-weight concrete beams tested by Harajli and Naaman and Bennett. On the other hand, the displacement ductility ratio of pre-tensioned lightweight concrete beams increased with the decrease of the partial prestressing ratio and with the increase of the effective prestress of strands. The load-displacement relationship of pre-tensioned lightweight concrete beam specimens can be suitably predicted by the developed non-linear two-dimensional analysis procedure. In addition, the flexural cracking moment and flexural capacity of pre-tensioned lightweight concrete beams can be conservatively evaluated using the elasticity theorem and the approach specified in ACI 318-08, respectively.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.750-754
• /
• 2003

본 논문에서는 X-선 관전류를 직접 검출하여 제어하는 2.4kW(80kv,30mA)급 최소형, 최경량 휴대용 X-선 발생 장치를 제안한다. 본 장치는 X-선발생을 위한 고전압 발생단에 모노탱크 블록 사용하였고, 고주파 고전압용 인버터에는 스위칭 전력소자로서 MOS-FET를 채용, 70kHz로 스위칭 함으로서 고전압 변압기를 비롯한 고전압 발생부의 크기와 무게를 최소화하였다. 또한, 설정 관전류에 대한 정밀한 제어를 위하여 2단계 모드로 필라멘트 예열을 행하여 관전류 응답특성을 개선하였으며 제안한 휴대용 X-선 발생장치의 부하변동에 따른 X-선 관전압과 관전류의 개선된 특징을 실험파형을 통하여 입증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.151-153
• /
• 2016

80/128-비트 마스터키 길이와 ECB, CBC, OFB, CTR의 4가지 운영모드를 지원하는 PRESENT 경량 블록암호 프로세서를 설계하고, Virtex5 FPGA에 구현하여 정상 동작함을 확인하였다. PRESENT 크립토 프로세서를 $0.18{\mu}m$ 공정의 CMOS 셀 라이브러리로 합성한 결과 8,237 GE로 구현되었으며, 최대 434 MHz 클록으로 동작하여 868 Mbps의 성능을 갖는 것으로 예측되었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.12-13
• /
• 2019

The bearing capacity of the wall against the eccentric load when the washbasin was attached on the ALC block wall was tested. Test methods are BS EN 14688 and BS 5234-2. Tests in accordance with BS EN 14688 showed that the holding capacity of steel was much stronger and more stable when HA-II (chemical anchor) was used than when the washbasin was fixed using HA-I (plastic anchor). As an experimental result according to the Annex K of BS 5234-2, the bearing capacity of ALC block wall corresponded to the "stage in which the force works(performance grade) 1,500N" for all of the cases where a washbasin is fixed using two types of the wall's dedicated anchors(HA-I and HA-II).

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.113-116
• /
• 2021

일반적으로 딥러닝 기반의 객체 검출(Object Detection)기법은 합성곱 신경망(Convolutional Neural Network, CNN)을 통해 입력된 영상의 특징(Feature)을 추출하여 이를 통해 객체 검출을 수행한다. 최근 자연어 처리 분야에서 획기적인 성능을 보인 트랜스포머(Transformer)가 영상 분류, 객체 검출과 같은 컴퓨터 비전 작업을 수행하는데 있어 경쟁력이 있음이 드러나고 있다. 본 논문에서는 YOLOv4-CSP의 CSP 블록을 개선한 one-stage 방식의 객체 검출 네트워크를 제안한다. 개선된 CSP 블록은 트랜스포머(Transformer)의 멀티 헤드 어텐션(Multi-Head Attention)과 CSP 형태의 공간 피라미드 풀링(Spatial Pyramid Pooling, SPP) 연산을 기반으로 네트워크의 Backbone과 Neck에서의 feature 학습을 돕는다. 본 실험은 MSCOCO test-dev2017 데이터 셋으로 평가하였으며 제안하는 네트워크는 YOLOv4-CSP의 경량화 모델인 YOLOv4s-mish에 대하여 평균 정밀도(Average Precision, AP)기준 2.7% 향상된 검출 정확도를 보인다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.405-408
• /
• 2020

양자 컴퓨터를 활용한 양자 알고리즘은 우리가 현재 사용하고 있는 많은 암호들의 안전성을 깨뜨릴 수 있다. 그루버 알고리즘을 n-bit 보안레벨을 가지는 대칭키 암호에 적용한다면 보안레벨을 O(2^n/2)까지 낮출 수 있다. 그루버 알고리즘을 적용하기 위해서는 우선 대상 암호가 양자 회로로 구현되어야 한다. 때문에 대상 블록암호를 양자 회로로 최적화하는 연구들이 최근 활발히 진행되고 있다. 이에 본 논문에서는 국산 경량 블록암호 LEA를 양자 회로에서 최적화 하였다. 기존의 LEA 양자 회로구현과 비교하여 양자 게이트는 더 많이 사용하였지만, 큐빗을 획기적으로 줄일 수 있었으며 이에 대한 성능 평가를 수행하였다. 마지막으로 제안하는 LEA 구현에 그루버 알고리즘을 적용하기 위한 양자 자원을 평가하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.229-231
• /
• 2021

In this paper, we describe a hardware design of the SIMECK block cipher algorithm that can be implemented in lightweight hardware with appropriate security strength. To achieve fast encryption and decryption operations, it was designed using two-step method that reduces the number of operation rounds. The designed SIMECK cryptographic core was implemented in Arty S7-50 FPGA device and its hardware operation was verified with a GUI using Python.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.401-403
• /
• 2015

This paper describes an efficient hardware design of 128-bit block cipher algorithm LEA(lightweight encryption algorithm). In order to achieve area-efficient and low-power implementation, round block and key scheduler block are optimized to share hardware resources for encryption and decryption. The key scheduler register is modified to reduce clock cycles required for key scheduling, which results in improved encryption/decryption performance. FPGA synthesis results of the LEA processor show that it has 2,364 slices, and the estimated performance for the master key of 128/192/256-bit at 113 MHz clock frequency is about 181/162/109 Mbps, respectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.6
• /
• pp.1353-1360
• /
• 2016

We analyze the efficiency of the double-block-length hash functions, Abreast-DM, HIROSE, MDC-2, MJH, MJH-Double based on AES or LEA. We use optimized open-source code for AES, and our implemented source code for LEA. As a result, the hash functions based on LEA are generally more efficient than those, based on AES. In terms of speed, the hash function with LEA are 6%~19% faster than those with AES except for Abreast-DM. In terms of memory, the hash functions with LEA has 20~30 times more efficient than those with AES.