• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.27-37
• /
• 1991

In this paper the nonlinear free surface flows for an axisymmetric submerged body oscillating beneath the free surface are solved and the forces acting on the body are calculated. A boundary integral method is applied to solve the axisymmetric boundary value problem and the Runge-Kutta 4-th order method is used for the time stepping of the free surface location. The nonlinear forces acting on the axisymmetric body are computed and compared with published results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1001-1006
• /
• 2004

본 연구에서는 요소를 사용하지 않고 절점들만을 이용하여 해석이 가능한 수치기법인 무요소절점법(element-free Galerkin method)의 개념을 선형파의 회절 및 방사문제에 적용하는 방법에 대해 연구하였다. 파동장에 놓인 부유식 구조물에 의한 연직 2차원 경계치 문제를 해석 대상으로 하였고, 파랑과 구조물의 상호작용을 해석함에 있어 구조물에 작용하는 동유체력과 이로 인한 구조물의 동적응답을 계산하기 위해서 무요소절점법을 이용하였다. 무요소절점법의 수식화과정을 체계적으로 정리하였으며, 무요소절점법의 타당성 및 적용성을 입증하기 위해서 직사자형 부유체에 내한 수치해석을 실시하여 타 논문의 결과와 비교하였다. 또한 해의 정확도에 직접적으로 영향을 미치는 절점간격과 파수와의 관계에 대한 기준 설정을 위한 수치실험도 수행하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.643-645
• /
• 2002

본 논문은 영상의 isophote정보를 constraint로 사용만 유전자 알고리즘 (Genetic Algorithms) 기반의 컬러 영상 복원방법을 제안한다. 제안만 방법은 오염된 관측 영상으로부터 원 영상으로 복원하기 위해. 영상 복원 문제인 illposed 문제를 유전자 알고리즘을 이용하여 비용함수(cost funcition)가 최소가 되도록 하는 최적화 문제로 모델링 한다. 본 논문에서 제안만 방법은 영상에서 같은 밝기 값을 가진 영역의 경계선을 나타내는 isophole 를 비용함수의 정칙화(regularization) 연산자로 사용하여 영상을 복원한다. 사용자가 복원할 영역을 지정만 후, 유전자 알고리즘을 사용하여 복원될 영역치 isophote 를 자연스럽게 유지하도록 복원한다. 제안한 방법은 디지털 비디오에서 상업적인 광고나, 자막 측은 로고등을 제거하는데 사용될 수 있으며, 실험 결과, 일반적으로 영상 복원에 많이 사용하는 Constraint 로 라플라시안(Laplaoian) 연산자보다 isophote를 정칙화 연산자로 사용함으로써 효율적으로 영상이 복원됨을 알 수 있다.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.1
• /
• pp.28-37
• /
• 1999

In this paper. we developed a delay test architecture and test procedure for clocked 5-bit asynchronous counter circuit based on boundary scan architecture. To develope, we analyze the problems of conventional method on delay test for clocked sequential circuit in boundary scan architecture. This paper discusses several problems of delay test on boundary scan architecture for clocked sequential circuit. Conventional test method has some problems of improper capture timing, of same pattern insertion, of increase of test time. We suggest a delay test architecture and test procedure, is based on a clock count-generation technique to generate continuous clocks for clocked input of CUT. The simulation results or 5-bit counter shows the accurate operation and effectiveness of the proposed delay test architecture and procedure.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.33-35
• /
• 2006

배전 독립사업부제 도입 및 분산전원의 출현으로 배전계통은 계획 및 운영에 있어서도 변화가 일어 날 것이다. 예로, 기존의 방사상 구조의 배전 계통은 분산 전원의 출현으로 부분적인 그물망 구조로 변형될 수 있으며, 사업 구역이나 사업 지역으로 나누어진 배전계통에서는 서로 다른 관리 체제 하에서 운영이 필요하기 때문에 각 배전회사간의 정보 공유 문제가 발생할 수도 있다. 이러한 문제를 해결하기 위해 분화된 배전 계통의 특성을 고려하여 송전계통과 같이 전체 시스템에 대해 조류 계산하지 않고 배전 계통을 몇 개의 영역으로 나누고 다른 영역과의 경계 정보만을 이용하여 자신의 영역에 대한 조류 계산을 수행하는 알고리즘을 제안하였다. 이런 특성을 최대한 반영한 각 영역의 조류 계산은 분산 전원의 투입으로 인한 양방향 조류가 발생하게 되므로 그물망 구조로 된 구역과 기존의 방사상 구조로 된 영역으로 구분할 수 있다. 본 논문에서는 구역 특성에 맞고 배전 계통에 적용 가능한 알고리즘으로 먼저 분리 구역별 조류 계산을 수행한 후 그 다음 경계치 교환으로 배전 계통 전체의 조류 계산을 수행하는 알고리즘을 제안한다. 즉 방사상 구조 영역에서는 back/forward sweep 방법으로 수행하고 그물망 구조 영역에서는 Full Newton-Raphson 방법으로 구분하여 영역의 특성에 맞게 수행하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.675-691
• /
• 2002

The focus of this work is on the development of large-scale numerical optimization methods for optimal control of steady incompressible Navier-Stokes flows. The control is affected by the suction or injection of fluid on portions of the boundary, and the objective function of fluid on portions of the boundary, and the objective function represents the rate at which energy is dissipated in the fluid. We develop reduced Hessian sequential quadratic programming. Both quasi-Newton and Newton variants are developed and compared to the approach of eliminating the flow equations and variables, which is effectively the generalized reduced gradient method. Optimal control problems we solved for two-dimensional flow around a cylinder. The examples demonstrate at least an order-of-magnitude reduction in time taken, allowing the optimal solution of flow control problems in as little as half an hour on a desktop workstation.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.72-78
• /
• 2024

It is essential to coincide with moving target planet at future arrival changing point during space flight time in an interplanetary orbit design. Transition orbit elements can be obtained from traditional Lambert solutions by adjusting initial and final positions include flight time. Two-point boundary values of orbits can be selected in the design process. From this point of view, interplanetary orbits are infinite if they can be acquired from departure velocity without limit. However, appropriate and optimized procedures are needed to obtain an optimum interplanetary orbit to meet given conditions. The departure velocity is highly dependent on space launch vehicle's ability up to now. In this paper, algorithms of professor Howard Curtis at Embry-Riddle Aeronautical University were applied to obtain Lambert solution and orbit elements.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.187-195
• /
• 2024

This paper presents two-dimensional boundary value problems of the stress-based gradient elasticity within the smoothed finite element method (S-FEM) framework. Gradient elasticity is introduced to address the limitations of classical elasticity, particularly its struggle to capture size-dependent mechanical behavior at the micro/nano scale. The Ru-Aifantis theorem is employed to overcome the challenges of high-order differential equations in gradient elasticity. This theorem effectively splits the original equation into two solvable second-order differential equations, enabling its incorporation into the S-FEM framework. The present method utilizes a staggered scheme to solve the boundary value problems. This approach efficiently separates the calculation of the local displacement field (obtained over each smoothing domain) from the non-local stress field (computed element-wise). A series of numerical tests are conducted to investigate the influence of the internal length scale, a key parameter in gradient elasticity. The results demonstrate the effectiveness of the proposed approach in smoothing stress concentrations typically observed at crack tips and dislocation lines.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.4
• /
• pp.257-264
• /
• 2002

This paper is concerned with the analysis of wave reflection and transmission from multiple floating breakwaters. Linear potential theory was used for modeling wave field, and the behaviors of the floating breakwaters was represented as linearized equation of motions. The boundary value problem for the wave field was discretized by Galerkin technique. The radiation condition at infinity was modeled as infinite elements developed by Park et al.(1991). The validation of the developed model was given through the comparison with hydraulic experimental data conducted by Park et al.(2000). The possibility for the application of multiple floating breakwaters was also discussed based on the numerical experiments.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.521-526
• /
• 2003

In this paper, we propose a geometric active contour model based on intensity information and curve evolution for detecting region boundaries. We put boundary extraction problem as the minimization of the difference between the average intensity of the region and the intensity of the expanding closed curves. We used level set theory to implement the curve evolution for optimal solution. It offered much more freedom in the initial curve position than a general active contour model. Our methods could detect regions whose boundaries are not necessarily defiened by gradient compared to general edge based methods and detect multiple boundaries at the same time. We could improve the result by using anisotropic diffusion filter in image preprocessing. The performance of our model was demonstrated on several data sets like CT and MRI medical images.