• Restorative Dentistry and Endodontics
• /
• v.35 no.1
• /
• pp.13-19
• /
• 2010

The purpose of this study was to compare the microshear bond strength of a self-etching primer adhesive to dentin prepared with different diamond points, carbide burs and SiC papers, and also to determine which SiC paper yield similar strength to that of dentinal surface prepared with points or burs. Fifty-six human molar were sectioned to expose the occlusal dentinal surfaces of crowns and slabs of 1.2 mm thick were made. Dentinal surfaces were removed with three diamond points, two carbide burs, and three SiC papers. They were divided into one of eight equal groups (n = 7); Group 1: standard diamond point(TF-12), Group 2: fine diamond point (TF-12F), Group 3: extrafine diamond point (TF-12EF), Group 4: plain-cut carbide bur (no. 245), Group 5: cross-cut carbide bur (no. 557), Group 6 : P 120-grade SiC paper, Group 7: P 220-grade SiC paper, Group 8: P 800-grade SiC paper. Clearfil SE Bond was applied on dentinal surface and Clearfil AP-X was placed on dentinal surface using Tygon tubes. After the bonded specimens were subjected to uSBS testing, the mean uSBS (n = 20 for each group) was statistically compared using one-way ANOV A and Tukey HSD test. In conclusion, the use of extrafine diamond point is recommended for improved bonding of Clearfil SE Bond to dentin. Also the use of P 220-grade SiC paper in vitro will be yield the results closer to dentinal surface prepared with fine diamond point or carbide burs in vivo.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.300-305
• /
• 2020

Purpose: The purpose of this study is to compare the shear bond strength of 3D printing denture base resin according to surface treatment of artificial teeth. Materials and methods: 3D printing denture base resin was fabricated as specimens using 3D printer. The experimental group divided the surface treatment of artificial teeth into five groups according to the application of sandblasting and primer (n=10). Shear bond strengths between denture base and artificial teeth were measured by universal testing machine. All measurements were analyzed by one-way ANOVA and Turkey test (α=.05). Fracture mode of each specimen was analyzed. Microscopic evaluation was conducted by using a scanning electron microscope. Results: Unsurfaced treated group represented the lowest value. The primer groups had significantly higher result values (P<.05). Most specimens of the primer groups had cohesive failure. Conclusion: In 3D printing denture base resin group, mechanical and chemical surface treatment of artificial teeth has increased the shear bond strength. Therefore, if dentures are produced using 3D printing, proper mechanical and chemical treatment of artificial teeth is necessary for adhesion of dentures and artificial teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.4
• /
• pp.445-454
• /
• 2018

The aim of this study was to measure the shear bond strength (SBS) of different adhesive systems to calcium silicate-based materials (Biodentine and RetroMTA). Eighty cylindrical acrylic blocks, with a hole (5.0 mm diameter, 2.0 mm height) in each, were prepared. The holes were filled with Biodentine (BD) and RetroMTA (RMTA), and the specimens were divided into 2 groups. Each group was classified into 4 subgroups: Clearfil$^{TM}$ SE (CSE) ; AQ bond (AQ) ; All bond universal Self-etch (ABU-SE) ; and All bond universal Total-etch (ABU-TE). After the application of different adhesive systems, composite resin (Z350) was applied over BD and RMTA. The SBS was measured using a universal testing machine, and the data were compared using the Kruskal-Wallis test and the Mann-Whitney test. The highest and lowest values of SBS were observed for BD-ABU-SE and RMTA-AQ, respectively. No significant differences were found in the SBS between ABU-TE and ABU-SE and between ABU-TE and CSE to BD and RMTA. According to the data, BD showed a higher SBS than did RMTA when BD and RMTA are compared in the same adhesive agents. Further, among all groups, composite resin with ABU-SE showed better bond strength to BD and RMTA.

• Korean Journal of Poultry Science
• /
• v.44 no.3
• /
• pp.189-198
• /
• 2017

This study was conducted to develop a new synthetic breed of Korean native chicken. The combining ability and reciprocal effects for production traits were estimated on 1,157 hens from a $5{\times}5$ diallel cross-mating design using grand parent stock (GPS) lines of Korean native chicken. Body weight, viability, age at first egg laying, egg weight, and hen-day egg production were measured and analyzed. The results showed that the general combining ability (GCA) of the survival rate during laying periods was -9.6 to 11.1, with the highest value obtained in the W strain. Additionally, the GCA of the body weight at 12 weeks was -209.7 to 162.2, with the highest value obtained in the F strain. The GCA for age at fist egg laying was estimated to be -2.8 to 3.7, while the GCA of egg weight was -0.91 to 0.96, and the GCA of hen-day egg production was -4.9 to 6.0. In the estimation of specific combining ability, the YW combination showed the highest survival rate, FW showed the highest body weight at 12 weeks, and GW showed the highest hen-day egg production. The reciprocal effects were significantly different among crosses for almost all productivity traits. In identical breeding combinations, differences in ability were observed when the maternal or paternal breeds were switched. The mean value based on combining ability was higher in WY, WF, and GW combinations for survival rate; GF, HG, and HF combinations for body weight at 12 weeks; and GW, YW, and FW combinations for hen-day egg production. It is concluded that the GF and HF combinations, which have excellent growth performance and moderate survival rate, are the most desirable paternal parent stock (PS) strains, and the GW and FW combinations, which have great laying performance and moderate body weight, are the most desirable maternal PS strains.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.437-444
• /
• 2009

The purpose of this study was to evaluate the physical properties of different automixing resin cements and the shear bond strength on dentin. For this study, two self-adhesive automixing resin cement(Rely-X Unicem(3M ESPE, St. Paul, USA), Embrace resin cement(Pulpdent, Oakland, USA)) and one chemical polymerizing resin cement(Resiment Ready-Mix(J.L.Blosser Inc., Liberty Missouri, USA)) were used. To evaluate the physical properties, compressive strength, diametral tensile strength and flexural strength were measured. The specimens were fabricated using Teflon mould according to manufacturers' instructions and stored for 24 hours in an atmosphere of 100% humidity. To evaluate the shear bond strength on dentin, each cements were adhered to buccal dentinal surface of extracted human lower molars in 2mm diameter. Physical properties and shear bond strengths were measured using universal testing machine(Z010, Zwick GmbH, Ulm, Germany) at a crosshead speed of 0.5mm/min. The physical properties and shear bond strength of different automixing resin cements were statistically analyzed and compared between groups using One-way ANOVA test and Schffe post-hoc test at the 95% level of confidence. The result shows that chemical polymerizing automixing resin cement represents the relatively higher physical properties and shear bond strength than self-adhesive automixing resin cements.

• Korean Journal of Environment and Ecology
• /
• v.15 no.2
• /
• pp.173-185
• /
• 2001

마편초과의 좀목형 엽에 함유된 물질의 allelopathy 효과를 구명하기 위해 수용성 엽 추출액, 메탄올 엽 추출액, 엽 분말과 토양과의 혼화된 pot에 각각 상치, 이탈이란라이그라스, 개솔새, 억새 종자를 발아실험하여 발아억제물질을 분석한 결과는다음과 같다. 1. 좀목형 엽 분말을 증류수에 각각 24, 48, 72 시간 침지 후 추출물에 상치, 이탈리안라이그라스, 개솔개, 억새 종자를 파종한 후의 발아율은 각 처리구마다 대조구마다 높은 발아억제를 보였고, 48시간 침지시에는 각각 26.9%, 58.8%, 6.6%, 22.2%의 발아율을 보여 강한 발아억제현상르 보였다. 2. 좀목형 엽 분말을 메탄올 75%에 24, 48시간 침지 후 추출물에 이탈리아라이그사스, 개솔새, 억새 종자를 파종한 후의 발아율은 48시간 추출액때 각각 33.3%, 15.4%, 7.7%를 보여 48시간 수용성 추출액과 24시간 메탄올 추출액보다 강한 발아억제효과가 있었다. 3. 좀목형 엽 분말과 Vermiculite를 1: 99.5: 95, 10:90, 20:80(w/w)으로 구분한 pot에 공시수종을 파종한 결과 엽 분말의 비율이 높을수록 발아억제효과가 컸으며, 엽 분말이 20%인 경우 발아된 부분의 건중량의 비율은 실험구와 대조구간에 비교한 발아율의 비율보다 훨씬 낮아 생장억제효과가 있는 것으로 나타났다. 4. Column chromatography의 TLC를 이용하여 최종 7 fraction을 찾고 생물검정 결과, 5, 6번 fraction에 강한 활성을 나타냈다. 5. UV 와 IR분광분석 결과 UV 분광분석은 256 nm과 336nm에서 흡수 최대를 나타내었으며, 이들은 시르시트시약을 사용하여 검토한 결과 7위에 에테르 결합한 전형적인 플라본류로 추정되었고, IR 분광분석 결과 지방족에 에테르결합이 존재하는 것으로 생각되었다. 6. Py-GC-MS 분석으로부터 5, 6 fraction의 경우 플라본류에 1개의 당이 결합한 배당체 구조이고 B환의 경우 1개 또는 2개 이상의 페놀성 수산기의 존재가 예상되었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.520-527
• /
• 1999

For the purpose of providing some suggestions in selection of filling materials used in 'sandwich technique', the bond strengths between glass ionomer cement bases and composite resins were investigated and compared. For lining materials, 'Vitrebond' and 'Ketac-fil' were used. Using these two as bases, 10 of each following resins were built up on the top ; Z-100 (light curing resin) Clear-fil (chemical curing resin), Bis-core (dual cure resin), Dyract (compomer), therfore 10 specimens of each group and total of 80 specimens were made. After storing specimens in $37^{\circ}C$ deionized water for 24 hours, the shear bond strengths were measured under universal testing machine with 50 kg of full load scale and 1mm/min of cross-head speed and obtained the results as follows : 1. Over Vitrebond base, Z-100 showed the lowest bond strength but the other three did not show any difference in bond strength. 2. Over Ketac-fil base, Clear-fil showed the highest bond strength followed by Dyract, Bis-core, and Z-100 showed the lowest bond strengths. 3. Whereas Clear-fil showed the similar bond strengths on the Vitrebond base as other resins, it showed the highest bond strength on Ketac-fil base, which showed some difference in bond strength by differing GIC bases. 4. The bond strengths between base materials and composite resin showed a stronger resin-dependence tendency in cases with Ketac-fil bases rather than with Vitrebond bases.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1320-1324
• /
• 2005

Soybean (Glycine max L.) is an increasingly important food source and functional food. Platelet aggregation plays an important role in thrombogenesis and atherosclerosis. Here, we studied the anti-platelet aggregating effects of solvent extracts from Korean soybean varieties and isoflauone derivatives. Nine Korean soybean varieties were extracted by solvents (methanol and buthanol and their extracts was investigated for the inhibition against tile aggregation of washed rabbit platelets induced by collagen or thrombin. Maximal inhibition of buthanol extracts against platelet aggregation induced by collagen was $95\%$ in Black-kong and Jinpum - kong. The potency of their inhibition was in the following order : Black > Jinpum > Bokwang > Hwangkum > Pureun > Malli > Danbaek > Danyeob > Jangsu - kong. The Black - kong only seemed to produce the maximal inhibition against platelet aggregation induced by thrombin. Total isoflavone content measured was Jinpum-kong ($1347.8{\mu}g/g$) and Black-kong ($918.7{\mu}g/g$). Maximal inhibition of isoflavone derivatives against platelet aggregation induced by collagen was $97\%$ in genistein. The potency of their inhibition was in the following order: genistein>daidzein>genistin. The isoflavone derivatives did not affect the platelet aggregation induced by thrombin. However, Black-kong cortex seemed to Produce the optimal inhibition against platelet aggregation induced by collagen. These results suggest that Black-kong and Jinpum-kong may be a good source for antiplatelet agents, and their antiplatelet effect be related to tile content and the chemical structure with the number of -OH group and the attached glycoside in the isoflavone derivative.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.257-269
• /
• 2012

Global crisis expedites the change in the environment of industry and puts small size enterprises in danger of mass bankruptcy. Because of this, domestic small size enterprises is an urgent need of restructuring. Based on the small business data registered in the Credit Guarantee Fund, we estimated the survival probability in the context of the survival analysis. We also analyzed the survival time which are distinguished depending on the types of business in the small business. Financial variables were also conducted using COX regression analysis of small businesses by types of business. In terms of types of business wholesale and retail trade industry and services were relatively high in the survival probability than light, heavy, and the construction industries. Especially the construction industry showed the lowest survival probability. In addition, we found that construction industry, the bigger BIS (bank of international settlements capital ratio) and current ratio are, the smaller default-rate is. But the bigger borrowing bond is, the bigger default-rate is. In the light industry, the bigger BIS and ROA (return on assets) are, the smaller a default-rate is. In the wholesale and retail trade industry, the bigger bis and current ratio are, the smaller a default-rate is. In the heavy industry, the bigger BIS, ROA, current ratio are, the smaller default-rate is. Finally, in the services industry, the bigger current ratio is, the smaller a default-rate is.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1122-1127
• /
• 2001

This paper proposed a speed adaptive control system with load torque observer and feed-forward compensation using neural network for air compressor system driven an induction motor. The motor receive impact load change under the influence of piston movement of up and down, and so it difficult to obtain good speed control characteristics. With real-time adjusting control gain estimated in neural network, control characteristics of motor is improved. The validity of the proposed system is confirmed through the theoretical analysis and computer simulation.