• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.632-639
• /
• 1997

Relative density and microstructure of the pressureless sintered TiC-$TiB_2$ composite has been studied. The maximum sintered density was 95% and the critical amounts of sintering aids were 1 wt% Fe and 3 wt% Ni. It was found that TiC matrix phase inhibited effectively grain growth of the dispersed $TiB_2$ phase. The TEM investigation reveals that the Ni-rich precipitates were solidified from the liquid phase, confirmed by the presence of the waved and/or step phase boundaries. The precipitates also acts as the origin of the dislocation formation in the matrix phases.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.63-68
• /
• 2002

Zn/sub 2-x/Mn/sub x/SiO/sub 4/ phosphors for PDP were synthesized by solid state reaction method. The effects of firing temperature, ratio of hydrogen gas to nitrogen for heat treatment and concentration of activator and co-dopants on the luminous properties have been investigated. It was found that the phosphor fabricated at 1400℃ with x = 0.002 Mn concentration had a maximum brightness. Luminous properties of a phosphor were improved when Cr/sup 3＋/ was added as a co-dopant rather than other co-dopants.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.937-944
• /
• 2015

Recently, the change of mechanical properties and microstructural evolution during severe plastic deformation (SPD), such as Equal Channel Angular Extrusion (ECAE), has been the subject of intensive investigation because of the unique physical and mechanical properties of severely deformed materials. In this study, two types of ECAE processes were considered, dies with intersection angles ${\Phi}$ of $90^{\circ}$ and $120^{\circ}$, using experiments and simulations. The decoupled method, in which the rigid-plastic finite element method is incorporated with the rate-independent crystal plasticity model, was applied to predict the texture evolution in commercially pure aluminum during the ECAE processes with $120^{\circ}$ and $90^{\circ}$ dies. The simulated textures were compared with a measured texture via an EBSD OIM analysis. The comparison showed that the simulated textures generally were in good agreement with the experimentally measured texture.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.54-59
• /
• 2009

It was difficult for the existing rotary kiln to fabricate the fine aggregates under 3 mm due to the sticking phenomenon between specimens. In this study, the vertical type fluidizing furnace was designed and manufactured by which the lightweight fine aggregates of specific gravity $1.1{\sim}1.7$, water absorption $11{\sim}19%$ could be fabricated from the green body of clay: stone sludge: spent bleaching clay = 60 : 30 : 10 (wt%) without sticking-together happening. The minimum sintering temperature for bloating of aggregates was $1130^{\circ}C$. The specimens sintered over $1140^{\circ}C$ showed the typical bloating characteristics of lightweight aggregates and an inner layer was discovered due to widened cracks on a surface. But the crack on a surface did not propagate into a black core area so had no effect on a water absorption of aggregates. The sintering temperature made the thickness of shell and the black core area thin and expanded respectively but the sintering time did not affect the microsturcture of aggregates. The water absorption of aggregates decreased with increasing temperature owing to increased amount of liquid formed on a surface. Also sintering time affected a lot on a water absorption because it takes a time to form a liquid, which change the open pores to closed pores by blocking.

• Transactions of Materials Processing
• /
• v.14 no.4 s.76
• /
• pp.319-326
• /
• 2005

In this study, the nano-deformation behavior of semi-solid Al-Si alloy was investigated using a molecular dynamics simulation as a part of the research on the surface crack behavior in thixoformed automobile parts. The microstructure of the grain-size controlled Al-Si alloy consists of primary and eutectic regions. In eutectic regions the crack initiation begins with initial fracture of the eutectic silicon particles and inside other intermetallic phases. Nano-deformation characteristics in the eutectic and primary phase of the grain-size controlled Al-Si alloy were investigated through the molecular dynamics simulation. The primary phase was assumed to be single crystal aluminum. It was shown that the vacancy occurred at the zone where silicon molecules were.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1516-1523
• /
• 1996

The present study is concerned with the development of anisotropy and deformation texture in polycrystals. The individual grain in an aggregate is assumed to experience the viscoplastic dedformation with crystallographic slip that unsure uniquenessof the active slip systems and shearing rate onthese systems. Two different methods for updating the grain orientation are examined. Texture development for some deformation modes such as plane strain compression, uniaxial tension and simple shear are found. Changes in anisotropic flow potential due to texture development during large deformation are also given. Anisotropic behavior of polycrystals with defferent textures are examined.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.4
• /
• pp.196-201
• /
• 2009

In order to give emission functionality for laponite the laponite-X (x = Eu, Tb) phosphors were prepared by calcination of cryogels which were prepared through Na ion exchange reaction with Eu and Tb ions. Thermal stability and emission properties of new laponite-X (X = Eu, Tb) phosphors were investigated by X-ray diffractormeter and UV/VUV spectrofluorometer. The phosphors were stable around up to $600^{\circ}C$ and new crystalline phases were observed at $700^{\circ}C$. Red and green emissions of phosphors under UV/VUV excitation were also identified at $300^{\circ}C$ and $500^{\circ}C$ as emission peaks of $Eu^{3+}$ and $Tb^{3+}$, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.209-212
• /
• 2001

It is known that the mim forming processes show somewhat different phenomena compared with the conventional metal forming processes, namely, the size effect, enhanced friction effect and etc. Such typical phenomena, however, are not predicted by the conventional finite element analysis, which has been an efficient numerical tool to predict the metal forming processes. It is due to the fact that the constitutive relations used does not describe the microstructural characteristics of the materials. In the present investigation, the finite element formulation using the rate-dependent rigid plastic crystal plasticity model of the face-centered cubic materials is conducted to predict the micro mechanical behaviors during the mim forming processes. The finite element analysis, however, provides mesh-dependent solutions for the intragranular deformations. Therefore, the couple stress energy is additionally introduced into the variational principle and formulated within the framework of the rigid plastic finite element method to obtain mesh-independent solutions. Micro deformations of single crystal and bicrystal with various orientations are calculated to show the potential of the developed formulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.287-290
• /
• 2005

The shearing and punching processes are analyzed with the finite element method using an isotropic material model. The experimental result in the punching process shows that final radiuses of sheet metal according to the rolling direction and transverse direction are different because of the material anisotropy. The material anisotropy is induced by complicated large deformation in the polycrystalline aggregate. The contact region between the punch and sheet metal experiences severe deformation such as shear, compression and tension in the punching process. In this paper, the analysis of punching process for Al 1100 is performed with the ABAQUS Standard. The analysis of texture development and evolution is carried out based on the deformation history in the punching process. The deformation histories are extracted by UMAT in the ABAQUS Standard. The torture development is investigated with the pole figure and yield surface during the punching process.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.406-409
• /
• 2004

A blue phosphor(ZnS:Cu) is manufactured by solid state reaction for ACPEL(AC powder EL). The effect of artificial defect on phosphor surface on the ZnO phase conversion and resulting luminescence have been studied. It was found that ZnS:Cu could converse to cubic phase more easily due to the formation of artificial defect on 1st fired phosphor by ball-milling process, resulting in improvement of luminescence of phosphor phosphors under the driven EL condition. We found out an optimized ball-mill condition through considering effect of each ball-mill conditions such as milling time and milling rpm on defect. Also we determined relationship between emission luminescence and phase of phosphor based on analyses of crystal structures of phosphors. A significant improvement above 30% was observed in electroluminescence by the artificial defect on ZnS:Cu phosphors compared to non-treated phosphors.