한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제32권11호
  • /
  • Pages.937-944
  • /
  • 2015
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

결정 소성학과 강소성 유한요소해석을 연계한 ECAE 공정에서의 변형 집합 조직 발달에 대한 연구

Prediction of Texture Evolution in Equal Channel Angular Extrusion (ECAE) Using Rate-Independent Crystal Plasticity with Rigid-Plastic Finite Element Method

  • Kim, Kyung-Jin (School of Mechanical and Automotive Engineering, Kyungil University) ;
  • Yoon, Jeong-Whan (School of Engineering, Deakin University) ;
  • Yang, Dong-Yol (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2015.08.28
  • 심사 : 2015.10.13
  • 발행 : 2015.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, the change of mechanical properties and microstructural evolution during severe plastic deformation (SPD), such as Equal Channel Angular Extrusion (ECAE), has been the subject of intensive investigation because of the unique physical and mechanical properties of severely deformed materials. In this study, two types of ECAE processes were considered, dies with intersection angles ${\Phi}$ of $90^{\circ}$ and $120^{\circ}$, using experiments and simulations. The decoupled method, in which the rigid-plastic finite element method is incorporated with the rate-independent crystal plasticity model, was applied to predict the texture evolution in commercially pure aluminum during the ECAE processes with $120^{\circ}$ and $90^{\circ}$ dies. The simulated textures were compared with a measured texture via an EBSD OIM analysis. The comparison showed that the simulated textures generally were in good agreement with the experimentally measured texture.

키워드

참고문헌

  1. Aukrust, T., Tjotta, S., Vatne, H., and Van Houtte, P., "Coupled FEM and Texture Modelling of Plane Strain Extrusion of an Aluminium Alloy," International Journal of Plasticity, Vol. 13, No. 1, pp. 111-125, 1997. https://doi.org/10.1016/S0749-6419(97)00003-X
  2. Beaudoin, A. J., Mathur, K., Dawson, P., and Johnson, G., "Three-Dimensional Deformation Process Simulation with Explicit Use of Polycrystal Plasticity Models," International Journal of Plasticity, Vol. 9, No. 7, pp. 833-860, 1993. https://doi.org/10.1016/0749-6419(93)90054-T
  3. Kwon, G., Chae, S., Kwon, S., Kim, M., and Hwang, S., "Frictional Effects on the Deformation Behavior of Materials and Die during Equal Channel Angular Pressing (ECAP) with Pure-Zr," J. Korean Soc. Precis. Eng., Vol. 18, No. 6, pp. 182-187, 2001.
  4. Segal, V., "Equal Channel Angular Extrusion: From Macromechanics to Structure Formation," Materials Science and Engineering: A, Vol. 271, No. 1, pp. 322-333, 1999. https://doi.org/10.1016/S0921-5093(99)00248-8
  5. Iwahashi, Y., Wang, J., Horita, Z., Nemoto, M., and Langdon, T. G., "Principle of Equal-Channel Angular Pressing for the Processing of Ultra-Fine Grained Materials," Scripta Materialia, Vol. 35, No. 2, pp. 143-146, 1996. https://doi.org/10.1016/1359-6462(96)00107-8
  6. Nakashima, K., Horita, Z., Nemoto, M., and Langdon, T. G., "Development of a Multi-Pass Facility for Equal-Channel Angular Pressing to High Total Strains," Materials Science and Engineering: A, Vol. 281, No. 1, pp. 82-87, 2000. https://doi.org/10.1016/S0921-5093(99)00744-3
  7. Iwahashi, Y., Horita, Z., Nemoto, M., and Langdon, T. G., "An Investigation of Microstructural Evolution during Equal-Channel Angular Pressing," Acta Materialia, Vol. 45, No. 11, pp. 4733-4741, 1997. https://doi.org/10.1016/S1359-6454(97)00100-6
  8. Kim, K., Yang, D., and Yoon, J., "Microstructural Evolution and Its Effect on Mechanical Properties of Commercially Pure Aluminum Deformed by ECAE (Equal Channel Angular Extrusion) via Routes A and C," Materials Science and Engineering: A, Vol. 527, No. 29, pp. 7927-7930, 2010. https://doi.org/10.1016/j.msea.2010.08.084
  9. Gambin, W., "Plasticity of Crystals with Interacting Slip Systems," Engineering Transactions, Vol. 39, No. 3-4, pp. 303-324, 1991.
  10. Gambin, W., "Crystal Plasticity Based on Yield Surfaces with Rounded-off Corners," Zeitschrift fur Angewandte Mathematik und Mechanik, Vol. 71, No. 4, pp. T265-T268, 1991.
  11. Gambin, W. and Barlat, F., "Modeling of Deformation Texture Based on Rate Independent Crystal Plasticity," International Journal of Plasticity, Vol. 13, No. 1-2, pp. 75-85, 1997. https://doi.org/10.1016/S0749-6419(97)00001-6
  12. Hill, R. and Rice, J., "Constitutive Analysis of Elastic-Plastic Crystals at Arbitrary Strain," Journal of the Mechanics and Physics of Solids, Vol. 20, No. 6, pp. 401-413, 1972. https://doi.org/10.1016/0022-5096(72)90017-8
  13. Taylor, G. I., "Plastic Strain in Metals," Journal of the Institute of Metals, Vol. 62, pp. 307-324, 1938.
  14. Yoon, J. and Yang, D., "A Three-Dimensional Rigid-Plastic Finite Element Analysis of Bevel Gear Forging by Using a Remeshing Technique," International Journal of Mechanical Sciences, Vol. 32, No. 4, pp. 277-291, 1990. https://doi.org/10.1016/0020-7403(90)90094-Y
  15. Park, K. and Yang, D., "Mismatching Refinement with Domain Decomposition for the Analysis of Steady-State Metal Forming Process," International Journal for Numerical Methods in Engineering, Vol. 48, No. 7, pp. 1089-1106, 2000. https://doi.org/10.1002/(SICI)1097-0207(20000710)48:7<1089::AID-NME918>3.0.CO;2-4