• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.4
• /
• pp.125-130
• /
• 2024

Preparation of ferromagnetic powders for the mixture of hematite and pure Mg powders by ball milling has been investigated. Also, consolidation of the ball-milled powders was performed in a spark plasma sintering machine at 800-1,000℃. It is found that a ferromagnetic Fe-MgO composite powders are obtained by ball milling of hematite and pure Mg powders before 1 hour. The magnetization and coercivity of ball-milled samples change at the results of the solid state reaction of hematite by pure Mg during ball milling. The saturation magnetization of ball-milled samples increases with increasing ball milling time and reaches to a maximum value of 93.4 emu/g after 5 hours of ball milling. Shrinkage change after sintering of ball-milled sample for 5 hours was significant above 300℃ and gradually increased with increasing temperature up to 800℃. X-ray diffraction result shows that the average grain size of Fe in Fe-MgO bulk sample sintered at 900℃ is 50 nm. It can be also seen that the coercivity of bulk sample sintered at 900℃ is still high value of 90 Oe, indicating that the grain growth of magnetic Fe phase during sintering process tend to be suppressed.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.1012-1017
• /
• 1997

Mg-Zn-Ca합금의 잉곳트는 BN을 내벽에 바른 4x$10^{-5}$Torr의 진공의 석영관내에서 제조하였다. Mg-Zn합금계의 입자미세화를 위하여 0.5-5wt.%조성범위의 Ca를 첨가하였다. 제조된 합금을 용체화처리한 후 결정립크기와 경도를 측정하였다. Mg-6wt.%Zn합금의 입자미세화효과는 Ca가 1.5wt%첨가 될 때 최적의 조건이었다. Mg-6wt.% Zn과 Mg-6wt.% Zn-2wt.% Ca및 Mg-6wt.% Zn-1.5wt.% Si합금을 시효처리하여 시효거동을 조사하였다. 입자미세화에 의한 경도증가효과는 Mg-Zn-Ca합금계에서 크게 나타났으며 시효에 의한 경도증가효과는 Mg-Zn-Si합금계에서 크게 나타났다. Mg-6wt.%Zn합금의 부식전류밀도는 0.5wt.% Ca의 조성에서 감소되었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.142-147
• /
• 1998

Rotary bending fatigue tests were carried out on the nitrided titanium in order to investigate the effect of nitriding layer on fatigue limit. Main results obtained are as follows. (1) The fatigue limit of nitrided pure titanium is remarkably reduced because of enlargement of grain size at high heat treating temperature and high stress field created from the elastic interaction in the compound layer. (2) Further test using specimen which was removed nitrified layer gradually, were also conducted and it was found that by removing the compound layer the fatigue limit recovered as the level of basic material and rather increased by coming of a diffusion layer. Therefore it is concluded that the surface compound layer generated by nitriding treatment reduced the fatigue limit but diffusion layer increased it.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.639-642
• /
• 2001

전형적인 비저항-온도 특성을 갖는 BaTiO$_3$계 PTC 세라믹을 일반적인 세라믹 공정을 이용하여 제조하였고, 결정립계면에 형성된 전위장벽의 높이를 구하였다. ZnO 바리스터의 전위장벽을 구하기 위해 이용되었던 커패시턴스-전압 관계식과는 다른 새로운 관계식을 제안하였고, 기존의 비저항-온도 관계식을 다소 변경한 관계식을 이용하여 전위장벽을 구하였다. 두 관계식으로부터 구한 전위장벽의 높이는 매우 유사한 값을 보이고 있으며 타 연구자들에 의해 보고된 값과도 잘 일치하고 있다. 비저항-온도 관계식과 커패시턴스-전압 관계식을 이용하여 130-18$0^{\circ}C$ 구간에서 구한 전위장벽의 크기는 각각 0.41-0.76V와 0.36-0.80V이었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.783-789
• /
• 2003

An experimental method to investigate the fracture strength and fracture toughness for the silicon nitrides sintered at various sintering temperature is established. The erosion rate for these materials in the various concentration of NaOH solution is also investigated. In result, the fracture strength of Si3N4 is decreased with the increase of sintering temperature. On the other hand, the fracture toughness KIC is increased with the increase of sintering temperature. The erosion rate of silicon nitride in the NaOH solution depend largely on the grain size and the concentration of NaOH solution. The erosion rate of silicon nitride sintered at $1800^{\circ}C$ was much higher than that at $1950^{\circ}C$. These results are due to the unique columnar structure of silicon nitride.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.04a
• /
• pp.46-47
• /
• 2006

고주파유도가열 연소합성법으로 60MPa의 기계적 압력과 고주파유도가열 장치의 총용량 (15KW)의 90%의 출력을 가해 75초의 짧은 시간에 97%이상의 상대밀도를 갖는 $TaSi_2-SiC$ 복합체를 제조하였으며, 제조된 시편의 미세조직 사진으로부터 선형분석법으로 측정한 $TaSi_2-SiC$ 의 평균 결정립크기는 각각 250nm 과 60nm 이었다. 또한 제조된 시편을 연마하여 비커스 경도계를 이용하여 기계적 특성평가를 한 결과 경도 와 파괴인성은 각각 $1366Kg/mm^2$ 와 $305MPam^{1/2}$ 이었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.95-102
• /
• 1994

Aluminum sheet application to automobile body panels has now become an important objective to meet the requirements of automobile weight reduction. As the Mg content in Al-Mg based alloys increased up to 7.19%, the strength and elongation increased. For instance. Al-7.19Mg alloy had a high strength of 305MPa and a high elongation of 35%. A study was also made to investigate the interrelation between grain size and tensile properties with varying the contents of Mg, Ti and Zr elements and annealing conditions. The yield stress decreased as the grain size increased, which increased the uniform elongation. The strain hardening exponents n increased as the Mg content increased, which depended on the increasing difficulties of the cross slip of dislocation.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.1
• /
• pp.22-30
• /
• 2007

Effects of ferrite grain size on static and dynamic deformation behaviors of SCM415 stels were investigated in this study. Dynamic torsional test was conducted using torsional Kolsky bar with the strain rate of $1.6{\times}10^3/s$. Specimens with three different grain size of ferrite, $4.6{\mu}m$, $11{\mu}m$, $35.5{\mu}m$ were used. Dimple fracture mode of the dynamic test specimens showed adiabatic shear bands on the beneath of fracture surface. Increased uniform elongation and decreased non-uniform elongation appeared as grain size of ferrite decreased in dynamic torsional test. However, shear strength was independent on grain size of ferrite.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.50-53
• /
• 2019

In this study, polycrystalline silicon thin film useful for the solar cells was fabricated by AIC(Aluminum Induced Crystallization) process. A diffusing barrier for this process is prepared with $Al_2O_3$. For the maximization of the grain size of the polycrystalline silicon, a selective blasting of the $Al_2O_3$ diffusing barrier was conducted before annealing treatment. The heat treatment for the activation of the amorphous-Si (a-Si) layer was carried out with Rapid Thermal Annealing (RTA) process. Crystallization of the a-Si layer was analyzed with XRD. It was confirmed that a-Si was crystallized at $500^{\circ}C$ and the silicon crystal is observed to be formed and the grain size of the polycrystalline silicon was observed to be $15.9{\mu}m$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.158-163
• /
• 1996

Attritor mill로 분쇄처리된 $UO_2$-30mo1%CeO2$_2$(masterblend) 분말을 turbular mixer와 attritor mill 에서 $UO_2$와 혼합, $UO_2$-5mol%CeO$_2$ 분말을 만들고, 이를 통해 분말처리 및 소결분위기가 각 성형체의 소결거동에 미치는 영향을 연구하였다. $UO_2$-30mo1%CeO$_2$ 분말을 attritor mill로 1 시간동안 분쇄하면 평균 분말크기는 3.7 $\mu\textrm{m}$ 이었다. Turbular mixer에서 만들어진 $UO_2$-5mol%CeO$_2$ 분말이 H$_2$ 및 Ar-4%H$_2$ 분위기에서 소결되면, 분말처리 방법에 따라서 소결밀도는 각각 10.07-10.11, 9.81-9.85 g/㎤이었다. 이러한 방법으로는 masterblend 분쇄처리 과정에 만들어진 agglomerate 는 소결이 거의 이루어지지 않아서 소결체내에 그대로 잔존되었다. Agglomerate는 그 내부에 균열이 생성되어 있었고, 또한 $UO_2$ 지지내의 확산도 방해하여 기지내부에도 큰 기공들이 많이 분포하였다. 희석혼합을 turbular mixer 대신 attritor mill에서 하게되면, 밀도는 H$_2$ 및 Ar-4%H$_2$ 분위기에서 각각 10.54, 10.39 g/㎤ 이었으며, 결정립크기는 5, 9.5 $\mu\textrm{m}$ 이었다. 이 경우에는 소결체내에 agglomerate가 거의 잔존하지 않았다.