• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.97-106
• /
• 2002

이 연구는 채소의 생산에서 가장 많은 노동력이 소요되고 단순ㆍ반복적인 결속작업의 기계화기술을 개발하기 위하여 수행되었다. 본 논문은 이 연구의 제1보로서 채소의 결속작업실태를 조사분석하여 결속기의 개발방향을 설정하고, 채소의 이송 및 결속끈의 공급장치를 개발한 결과를 수록한 것이다. 채소의 결속작업은 철심이 내장된 끈을 사용하여 타원형으로 결속하고 있었으며, 작업자가 경험적으로 계량하여 결속된 단의 크기는 작물별 차이는 있으나 동일 작물에서 작업자간 차이는 없는 것으로 나타났다. 따라서 결속기는 작업자가 채소를 공급하면 일정 길이의 결속끈을 사용하여 타원형으로 결속하여 배출하는 방식으로 개발한 필요성이 있다고 생각된다. 이를 위해서 결속기는 작업자가 채소를 용이하게 공급할 수 있으며 결속장치까지 흐트러짐이 없이 이송하는 채소의 이송장치, 결속끈의 길이를 조절하여 공급하는 결속끈의 공급장치, 이송된 채소를 결속끈을 꼬아서 타원형으로 결속하는 결속장치 등으로 구성되어야 할 것이다. 채소의 이송장치는 작업자가 채소의 일정량을 용이하게 공급할 수 있도록 폭의 조절이 가능한 트레이를 체인콘베이어에 부착한 구조, 결속끈의 공급장치는 압축력이 걸려 있는 우레탄 재질의 구동 및 종동롤러로 원하는 길이의 결속끈을 피딩하면 칼날로 절단하는 구조로 개발하였다.

• Annual Conference on Human and Language Technology
• /
• 2001.10d
• /
• pp.226-232
• /
• 2001

본 연구는 결속장치(cohesive devices)가 과학텍스트의 읽기 속도와 내용 이해에 끼치는 영향에 대해 연구하였다. 연구의 목적을 위한 실험을 통해서 먼저, 텍스트의 문단별 읽기 시간을 측정하여 온라인 처리 과정을 검토하였고, 둘째, 회상과 재인 검사를 실시하여 오프라인 상태에서의 이해도를 조사하였다. 이 연구의 재료로 사용된 텍스트는 번개 생성과정에 대한 과학텍스트로서, 반복, 지시사, 정박(anchoring), 인과적 접속사 등의 결속장치를 이용하여 응집성(coherence)의 강도를 높고, 낮게 조작하였다. 실험 결과, 결속장치가 길속장치의 종류와 지엽적 응집성의 강도에 따라 과학텍스트 읽기와 이해에 선택적으로 영향을 끼친다는 것을 발견하였다. 첫째, 인과적 접속사는 읽기 시간에는 영향을 주지 않는 반면, 이해를 촉진했는데, 이 긍정적 효과는 과제의 종류에 따라 다르게 나타났다. 즉, 회상 검사 결과에서는 인과적 접속사가 쓰인 모든 문단에서 유의한 차이가 나타났으나, 재인 검사에서는 유의한 차이가 부분적으로만 나타났다. 둘째, 반복 결속장치는 다른 결속장치와 같이 발생할 경우에만 읽기 시간과 이해를 부분적으로 촉진하는 것으로 나타났다. 셋째. 정박 결속장치의 영향은 읽기와 이해 두 처리 과정에 모두 선택적으로 영향을 준 것으로 나타났다. 인과적 접속사와 함께 쓰인 문단의 경우에는 회상 검사에서만, 반복 결속장치가 함께 쓰인 문단에서는 회상, 재인 검사에서 모두 긍정적 영향을 준 것으로 관찰되었다.

• Convergence Security Journal
• /
• v.11 no.2
• /
• pp.13-24
• /
• 2011

Policemen judge the situations rationally and use their equipment such as handcuffs and rope within the purview, finding them needed to arrest criminals in the act who commit crimes which conforms to death penalty, life imprisonment or long imprisonment for over 3 years in accordance with Clause 10-2, Article 1 of the Police Mandate Law and prevent fleeing from them, defend their and others' lives and bodies, or if there are probable causes to be recognized that using equipment is necessary to restrain the interference with government officials in the execution of their duties. However, as the cases which the criminals run away in handcuffs or with both hands tied occur, it results in the waste of police force, distrust and enormous trouble in the pursuit of their duties. Therefore, if the way to perceive fleeing of criminals who have already worn the police equipment by some simple assistive devices without developing other new equipment, it will be very effective for police duties. This study is about the combination apparatus for fugitive prevention attached to the existing handcuffs and rope whose alert sounds let the staffs working inside the office perceive the fleeing of wanted criminals and examined suspects who wear the handcuffs or are tied up with rope, providing that they go through the exit where a transmitter and a receiver were set. The combination apparatus for fugitive prevention which the study introduces contains the connecting parts which connect a flexible tube(cognition tags inside of the tube) of connector equipped with the police equipment with the ends of the tube and the part where these two meet and which connect them inside of the tube. The connecting parts are easy to be attached to the police equipment such as handcuffs and rope, but hard to be dismantled by the people tied up with the equipment. It enables watchers to perceive the fleeing of wanted criminals and examined suspects who wear the handcuffs or are tied up with rope, providing that they go through the exit where a transmitter and a receiver were set. Plus, if it is combined together with the portable receiver, it can be installed on the patrol cars and easily adopted to supervise illegally accessing of evidences. It is also avaliable to be adjunctively utilized for the handcuffs provided and the cost is so reasonable. Owing to its snap-on way to the cuffs, it can clear up any invasion of privacy and it can not be used as a self-injury tool because of the soft tube. Using AM Tag minimizes the lack of malfunction.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.241-244
• /
• 2001

스냅핏은 일종의 결속장치로서 흔히 플라스틱 부품들을 서로 체결하는데 이용되는데, 다른 결속장치에 비해 간편하고 생산품의 조립단가를 줄일 수 있고, 또한 분리력은 큰 반면에 결합력은 작게 만들 수 있는 장점을 가지고 있어 널리 사용된다. 스냅핏의 설계는 재료에 따른 물성(property) 및 구조적 강성(stiffness)이 설계 초기단계에서 고려되어야 하고, 또한 사출성형공정에서 스냅핏의 성형성도 예측되어야 한다. 그러나 스냅핏의 형상, 치수, 위치 등을 적절히 설계합성(synthesis)하고 적절한 재료를 선택하는 작업은 공정에 관한 종합적인 지식을 지원해 주는 합리적인 설계도구가 제공되지 못했던 이유로 사출 전문가의 오랜 기간 축적된 경험과 지식에만 전적으로 의존하여 왔다. 본 연구에서는 기존의 전문가에 의존해온 스냅핏 설계방법을 개선하기 위해 사출성형에 의해 제한되어지는 지식을 규칙베이스화하고 재료의 물성과 스냅핏의 형상 및 치수에 파라 스냅핏이 갖는 결합력, 분리력, 변형하중 및 허용언더컷 등을 출력하는 지적 설계 프로그램을 제안하였다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.79-94
• /
• 2009

The research project was conducted to develop a paper bagging machine for grape. This technology was aimed to highly reduce a labor for paper bagging in grape and bakery. In agriculture labor and farm population has rapidly decreased since 1980 in Korea so there was so limit in labor. In particular there is highly population in women and old age at rural area and thus labor cost is so high. Therefore a labor saving technology in agricultural sector might be needed to be replaced these old age with mechanical and labor saving tool in agriculture. The following was summarized of the research results for development of a paper bagging machine for grape. 1. Development of a new paper bagging machine for grape - This machine was designed by CATIA VI2/AUTO CAD2000 programme. - A paper bagging machine was mechanically binded a paper bag of grape which should be light and small size. This machine would be designed for women and old age with convenience during bagging work at the field site. - This machine was manufactured with total weight of less than 350g. - An overage bagging operation was more than 99% at the actual field process. - A paper bagging machine was designed with cartridge type which would be easily operated between rows and grape branches under field condition. - The type of cartridge pin was designed as a C-ring type with the length of 500mm which was good for bagging both grape and bakery. - In particular this machine was developed to easily operated among vines of the grape trees. 2. Field trials of a paper bagging machine in grape - There was high in grape quality as compared to the untreated control at the application of paper bagging machine. - The efficiency of paper bagging machine was 102% which was alternative tool for the conventional. - The roll pin of paper bagging machine was good with 5.3cm in terms of bagging precision. - There was no in grape quality between the paper bagging machine and the conventional method. - Disease infection and grape break was not in difference both treatments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.72-80
• /
• 2020

The purpose of this study is to secure the same or more structural performance and constructability for the details of hooks cross-constructed at 135 degrees used as external-ties standard detail in RC columns, therefore, to the purpose of improving constructability, the clip-type binding implement was suggested and A total of 28 pull-out specimens were prepared with the parameters of concrete compressive strength and clip-embeded length, clip installation location to examine the anchorage behavior of the clip-type binding implement. The experiment was carried out. The results of the experiment confirmed that the anchorage strength of the clip-type binding implement was higher than the details of hooks cross-constructed at 135-degree regardless of the diameter of tie and concrete strength, embeded clip length, clip installation. and The 90-degree end hook with clip-type binding implement was showed a similar an anchorage behavior of 135-degree end-hooked transverse reinforcement, consequently, The 90-degree end hooked with clip-type binding implement is evaluated to be the same anchorage behavior and performance as standard 135-degree end hook detail.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.28-33
• /
• 2015

In this study, the optimal design for the support and the binding device for the protection of crops for the maximum allowable stress of the shape necessary to minimize volume has been proposed. Optimization of the support and the binding device for the crops should be designed to support businesses in terms of profit, in part to reduce the material, and to profit from the ease and speed of working that part of the farmers. We used CATIA for the mechanical design and the ANSYS program for the structural analysis. Additionally, the optimization was performed by PIAnO with seven design variables for the binding device and three parameters for the support. The weight method using a multi-objective function was also determined by the Pareto optimal solution. The volume of the binding device in the optimum design result was found to be reduced by 16%, from $2.278e-005m^3to1.912e-005m^3$. From the result, we confirmed the effectiveness of the design method proposed as a multi-objective function optimization problem.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.668-673
• /
• 1999

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.02a
• /
• pp.614-620
• /
• 2000

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.1-5
• /
• 2001

One of the major advantages of using engineering plastics is ease of part assembly through a locking mechanism known as a snap fit. The typical snap fit involves a short cantilever beam with a projection at the free end. which slides over a one way ramp on the mating part to lock in place. The tightness of the mechanism is determined by the lateral interference of the two sliding members If too small they become loose and can't hold together. while if too large. excessive force can be generated. causing failure of the cantilever beam during the assembly operation. Therefore. the accurate determination of the force-deflection relationship for cantilever beams is a key element in snap fit design. And also. the process of injection molding should be considered when cantilever beam is designed. But it is not easy for novice designers to design them appropriately because of the profound knowledge related to injection molding. In this paper. an intelligent design program has been developed and proposed to improve a conventional empirical design method.