• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.55-61
• /
• 1982

An analytic solution for the spectral response of linearly-chirped grating filter is derived, which takes the finite physical length of filter into account. In the usual case of broad-band linearly-chirped grating filter the analytic solution is expressed in terms of elementary functions, by approximating asymptotically the involved parabolic cylinder functions over different ranges of its argument. It is also shown that derived results are general enough to include previously-available approximations as particular cases, and that they agree well with the numerical solutions based upon the Runge-Kutta method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.27-33
• /
• 2003

Circular Distributed-feedback (DFB) guiding structures can be incorporated in most of the semiconductor laser devices because of the frequency-selective property applicable as an optical filter in optical communications. In this paper, we present a novel and simple modal transmission-line theory (MTLT) using Floquet-Babinet's principle to analyze the optical filtering characteristics of Bragg gratings with cylindrical profile. The numerical results reveal that this method offers a simple and convenient algorithm to analyze the filtering characteristics of circular DFB configurations as well as is extended conveniently to evaluate the guiding problems of circular multi-layered periodic structures.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.35-42
• /
• 2000

A new dynamic passband filter enable to control the bandwidth using converging readout beam in photorefractive diffraction grating with high-efficiency is proposed and experimentally demonstrated. In this proposed scheme, the 3dB passband of a volume grating in crystal is theoretically predicted and the experimental results are obtained in consistent with our derivation that the bandwidth is controlled from 0.35nm to 3.3nm at the center wavelength of 670. 1nm.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.91-97
• /
• 2001

We present a fiber Bragg grating (FBG) sensor system for measuring static and high-speed dynamic strains with a resolution of about $5\mu$strain. This sensor system demodulates signals from the FBG sensor utilizing a compensated tunable narrow bandpass filter. We have placed a set of twelve FBGs to concrete specimen and measured its internal stress under various applied load conditions.itions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.430-436
• /
• 2009

In this paper, we propose and describe our implementation of an automatic control system for the center wavelength of a fiber Bragg grating. The proposed system consists of a Fabry-Perot filter and cantilever structure controlled by a step motor interfacing computer. We consider the change of the center wavelength and the reflective spectrum shape for a given FBG according to the translation distance of the push stick and the cantilever thickness variation. The proposed system can control the center wavelength of a FBG with a resolution of 0.01 nm by applying compression or extension to the FBG. The proposed system has characteristics that keep the desired wavelength of the FBG with a variation of environmental conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.53-59
• /
• 1989

A new proposed method can separate heart sounds and lung sounds by the realization of adaptive noise canceler using adaptive lattice Wiener filter in contrast to adaptive transversal LMS filter and high pass filter as before. Lung sounds and ECG signal are detected for this purpose, and especially the second heart sounds are reduced by finding T wave location with a T wave seeking algorithm. As a result, for heart sounds reduction It was found that adaptive transversal LMS filter required 100-200's orders, 75-100's orders In adaptive transversal MLMS filter, and only 10-20's orders in adaptive lattice Wiener filter. Adaptive filtering technique has shown greater accuracy than high pass filtering without loss of low frequency component.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.76-83
• /
• 1991

자기회귀-이동평균모델에 의하여 시스템의 파라미터를 추정할 수 있는 벡터채널 원형 격자 필터(vector channel circular lattice filter)의 알고리즘을 제시하였다. 이 알고리즘은 스칼라 연산만으로 이루어져 계산이 간단한 장점이 있다. 3자유도 시스템의 시뮬레이션 결과로부터 격자 필터의 성능을 검증하였으며, 1자유도 팔의 고유진동수와 감쇄비를 추정하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1711-1717
• /
• 2017

In this paper, we propose a fast and accurate method of extracting lens array lattice in integral imaging by using an appropriate calibration pattern image and fast median filtering. In order to extract the lattice of a lens array, vertical and horizontal edge images are required. To extract edge images, the well-known previous method used separable median filters. However, this method is slow and difficult to determine the median filter size. In order to overcome this problem, we try to improve speed by calculating median value through binary counting method. In addition, we propose a calibration pattern image that detects edges well and improves the accuracy. Experimental results indicate that the proposed method is superior to the existing method in extracting the lattice of a lens array in integral imaging.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.190-195
• /
• 2007

A novel optical coupling filter with finite-thickness metal-strip gratings printed on optical planar dielectric slabs is proposed, and Bragg conditions of the device are rigorously evaluated by using Modal Transmission-Line Theory (MTLT). The numerical results reveal that the guiding structures have filtering properties due to a leaky-wave stop-band while conventional DFB guiding structures consisted of dielectric gratings depend on a feedback-wave stop-band. Consequently, it shows that the optical coupling titter dependent on the leaky-wave filtering characteristics can be compounded of such optical devices as LD and optical fiber.