• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.11-24
• /
• 2008

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.26-37
• /
• 2009

This paper suggests a sensor's placement method for detecting the dilemma zone problem when real-time driver's safety service is provided at signalized intersections by multiple pointed traffic sensors using USN environments. For detecting the dangerous situations from vehicles accelerating through yellow intervals, red-light running and stopping abruptly like as dilemma zone problem, VISSIM(microscopic, behavior-based multi-purpose traffic simulation program) is used to perform a real-time multiple detection situation by changing the input data like as various inflow-volume, design speed change, driver perception and response time. As a result, the optimal interval of traffic sensors is 20~27m, and the initialized sensor location from stop-line is different according to road design speed. Moreover, the pattern of detection about dilemma zone is also different according to inflow-volumes. This paper shows that the method is useful to evaluate the sensor's placement problem based on micro-simulation and the results can be used as the basic research for USN services.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.1
• /
• pp.79-90
• /
• 2007

In this paper we proposed and implemented an incident detection model which combines fuzzy algorithm and traffic pattern in order to enhance the efficiency of incident detection for the highways with lamps. Most of the existing algorithms dealt with highways without lamps and can not be used for detecting incidents in the highways with lamps. The data used for model building are traffic volume, occupancy, and speed data. They have been collected by a loop sensor at 5 minutes interval at a point in the Internal Circular Highway of Seoul for the period of 3 months. In this model, the three parameters collected by sensor were fuzzified and combined with the daily traffic pattern of the link. The test of efficiency of the propsed model was performed by comparing the result of proposed model with traditional APID algorithm and fuzzy algorithm without the pattern data respectively. The result showed significant amount of improvement in reducing the false incident detection rate by 18%.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.59-67
• /
• 2009

With the development of high-cost vehicle detectors, low-cost detectors have also been studied due to the advantage that more detectors are provided within limited budgets. This study proposed a method to estimate vehicle speeds using vehicles' track data from auto manufacturers and time stamps obtained when vehicles' tires pass an inclined sensor (here, a tape switch sensor). In speed estimation, small vehicles and large vehicles is distinguished according to the ratio of time stamps for a wheelbase and a rear track obtained from a tape switch sensor. In particular, speed estimation can be adjusted through a parameter to determine vehicles' size so as to take into account location properties such as vehicles' classification ratio. The low-cost vehicle detector with an inclined sensor proposed in this study is expected to be widely utilized to monitor traffic conditions thanks to low cost.

• Journal of Korean Society of Transportation
• /
• v.17 no.4
• /
• pp.111-124
• /
• 1999

The Purpose of this thesis is to develop a vehicle classification algorithm using single Magnetometer detector during presence time of vehicle detection and is to examine a held application from field test. We collected data using Magnetometer detector on freeway and used digital data to change voltage values according to magnetic flux density in analysis. We collected these datum during the presence time and then obtained characteristics from wave form in these datum. Based on these characteristics, We used the following three methods for this a1gorithm :1. Template Matching Method,2. Neural Network Method using Back-propagation Algorithm 3. Complex Method using changed slope points and mixing method 1, 2. Of course, Before processing of over three methods, These data were processed normalizing by 20, 40 of size in only X axis and moving average by 0, 3, 4, 5 of size. Vehicle classification were Processed in three steps ; 2, 3, 5 types classification. In 2 types vehicle classification, recognition rate is 83% by template matching method.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.135-146
• /
• 2005

Up to now studies on the fusion of travel time from various detectors have been conducted based on the variance raito of the intermittent data mainly collected by GPS or probe vehicles. The fusion model based on the variance ratio of intermittent data is not suitable for the license plate recognition AVIs which can deal with vast amount of data. This study was carried out to develop the fusion model based on travel time acquired from the license plate recognition AVIs and the point detectors. In order to fuse travel time acquired from the point detectors and the license plate recognition AVIs, the optimized fusion model and the proportional fusion model were developed in this study. As a result of verification, the optimized fusion model showed the superior estimation performance. The optimized fusion model is the dynamic fusion ratio estimation model on real time base, which calculates fusion weights based on real time historic data and applies them to the current time period. The results of this study are expected to be used effectively for National Highway Traffic Management System to provide traffic information in the future. However, there should be further studies on the Proper distance for the establishment of the AVIs and the license plate matching rate according to the lanes for AVIs to be established.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.119-129
• /
• 2004

This paper is designed to report the results of development and validation procedures in relation to the Freeway Incident Management System (FIMS) prototype development as part of Intelligent Transportation Systems Research and Development program. The central core of the FIMS is an integration of the component parts and the modular, but the integrated system for freeway management. The whole approach has been component-orientated, with a secondary emphasis being placed on the traffic characteristics at the sites. The first action taken during the development process was the selection of the required data for each components within the existing infrastructure of Korean freeway system. After through review and analysis of vehicle detection data, the pilot site led to the utilization of different technologies in relation to the specific needs and character of the implementation. This meant that the existing system was tested in a different configuration at different sections of freeway, thereby increasing the validity and scope of the overall findings. The incident detection module has been performed according to predefined system validation specifications. The system validation specifications have identified two component data collection and analysis patterns which were outlined in the validation specifications; the on-line and off-line testing procedural frameworks. The off-line testing was achieved using asynchronous analysis, commonly in conjunction with simulation of device input data to take full advantage of the opportunity to test and calibrate the incident detection algorithms focused on APID, DES, DELOS and McMaster. The simulation was done with the use of synchronous analysis, thereby providing a means for testing the incident detection module.

• Proceedings of the KOR-KST Conference
• /
• 2003.02a
• /
• pp.3-18
• /
• 2003

본 논문은 ATMS와 ATIS에서 요구되는 교통관리 및 정보제공의 효과분석을 위해, 운전자의 주행 및 경로선택 의사결정과 교통제어에 대한 반응등 운전자 행태를 모의실험에 반영함으로써 교통시스템의 실시간 특성을 모사할 수 있는 모형을 구축하고 이를 기반으로 하는 미시적 교통 모의실험기를 개발하는 것을 목적으로 하였다. 본 연구에서는 운전자, 차량, 교통망, 검지 및 신호시스템, 교통정보제공시스템 등을 교통시스템의 주요 구성요소로 설정하였으며 운전자 및 차량특성, 차두시간분포와 차량발생모형, 차량주행모형, 차로변경 및 간격수락모형, 경로선택모형을 주모의실험모형을 구성하는 부모형으로 결정하였다. 따라서 본 논문에서는 각각의 부모형들에 대한 최근의 연구결과들을 검토하고, 현실모사 능력과 함께 다른 부모형들과의 연계, 모의실험기의 구현상에서의 적합성 등을 고려하여 적정모형의 선정 및 수정, 새로운 부모형의 구축을 수행하였다. 구축된 부모형을 통합하여 교통모의실험기를 개발하였으며 구축된 모형의 타당성 및 적용성 검토를 위해 현장자료 및 가상자료를 이용한 검증을 수행하였다. 검증결과 모형의 목적인 교통제어 및 정보제공등의 시스템 대안의 평가에 이용 가능한 것으로 나타났다. 또한 본 논문의 연구결과는 교통제어 및 정보제공전략 대안의 평가뿐만 아니라 차량추종 및 차로변경 등의 미시적 교통모형 연구, 동적기종점 통행량 추정, 동적통행배정의 연구에도 활용할 수 있을 것으로 판단된다. 본 논문의 연구모형은 현단계에서는 현실의 모사 및 분석을 위한 도구보다는 새로운 대안들간의 비교평가를 위한 도구로 활용할 수 있을 것으로 판단된다. 이에 따라 현실모사의 정확도를 확보하기 위한 검증 및 개선이 필요할 것이며, 각 부모형들에 대한 계속적인 연구와 새롭게 발표되는 연구결과를 수용한 지속적인 개발이 필요할 것이다.유기적인 연계에 있음을 밝히고 있다. 건설을 위한 정책적 시사점과 동북아 연구개발정보 Portal 및 APEC APGrid 연구망 등의 구체적인 정보인프라 구축방안을 도출하였다.술 주기를 도출하고, 산업 내 평균 권리 청구 항목 수를 이용하여 각 산업의 기술 범위를 비교하였다. 각각의 동적 분석을 통해 시간에 따른 변화 양상이 관찰하였고, ANOVA 분석을 이용하여 통계적 유의성을 검증하였다. 본 연구는 현재의 기술 패러다임 내에서 Pavitt이 제시한 산업 분류의 근거를 보충 설명하였고 특허 정보를 이용하여 기술혁신의 산업별 유형에 대한 폭넓은 분석방법을 제시하였다.별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9%