• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.223-231
• /
• 2011

The purpose of this case report is to introduce new attachment system(milled titanium bar with $Locator^{(R)}$ attachment) for implant supported overdenture in maxillary edentulous patients. A 56-years-old male patient visited the hospital due to the mobility of his maxillary fixed partial dentures(10-unit bridge). Including temporomandibular joint(TMJ), there was no specific PMHs to influence dental treatment. In radiographic and clinical evaluation, there was a severe bone resorption and mobility in maxillary teeth. Accordingly all the remaining maxillary teeth was extracted and fabrication of implant supported overdenture was planned. The milled titanium bar with $Locator^{(R)}$ was designed as an attachment system, considering the stability and retention of denture, masticatory efficiency, oral hygiene care, esthetics, pronunciation, and patient's financial state. The milled titanium bar was manufactured using CAD/CAM technology, and $Locator^{(R)}$ attachment connected to the bar by tap & drill method. For over 1-year, in terms of function and esthetics, satisfactory result was obtained.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.4
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.1
• /
• pp.54-62
• /
• 2018

In the 2000's, due to a change in hospital management strategy, the organizational structure shifted from a hierarchical system to a team system. While the hierarchical system is characterized by being activity centered, job title linked, and vertically managed, the team system is characterized by being competency centered, job title segregated, and horizontally managed. The job titles of medical technologist manager was surveyed three times in 1997, 2007, and 2017. It has been confirmed through staff members working at 24 hospitals in more than 500 beds in the metropolitan area. The results of job titles follow are as follow: "Team Leader; Part Leader" 14/24 (59%), "Chief Technologist; Area Head Technologist" 7/24 (29%), and "Chief" 3/24 (12%). The present authors propose an alternative name based on the team system to refine the three job titles currently used by medical technologists. First, the Chief Technologist is unclear if it refers to the Technologist General Manager or Technologist Manager. The Chief Technologist should be changed to "Team Leader". Second, given that Area Head Technologist or Section Chief are on the same position as Head Nurse, we suggest that Area Head Technologist or Section Chief should be changed to "Part Leader". Third, while the organization regulation is marked merely as Department of Laboratory Medicine according to the hierarchical system, it is marked as Laboratory Medicine Team according to the team system. Medical technologists come to have more belongingness, feeling of solidarity, and intimacy under the team system.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.185-192
• /
• 2019

DXA is the most commonly used BMD examination equipment with the best performance on reflecting the biological alteration with tiny change of bone density. In spite of the importance of the quality control to maintain the accuracy and precision of the examination, considerable number of hospitals are not conducting QC due to the difficulty and high cost of the phantom product. This study develops the cross revision phantom with 3D printer and the change of the degree of infilling filaments which can be readily secured, and provides the usefulness assessment of the developed phantom by comparing with existing products. The Hounsfield Units of ABS, TPU, PLA, 30% Cu-PLA, and 30% Al-PLA are assessed. The Hounsfield Units result at infilling rate 100% was $-149.74{\pm}2.36$, $-55.62{\pm}7.14$, $-7.68{\pm}3.82$, $87.53{\pm}1.07$, and $1795.20{\pm}16.15$. The L1, L2, L3 BMD of 3D printing phantom with linear regression model were $0.620{\pm}0.010g/cm^2$, $1.092{\pm}0.025g/cm^2$, $1.554{\pm}0.026g/cm^2$ which are statistically relevant to the existing phantom products. This result provides the base line data for various medical phantom produce and capability of proper quality control of DXA equipment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.55-60
• /
• 2020

The aim of this study was to investigate the change of microbial contamination levels in the different areas and at the different time points after application of a quaternary ammonium compound (QAC) that has mechanical antimicrobial effect. The microbial contamination levels were measured in three different areas; unit chair handle, spit sink area and hand piece holder at different time points using adenosine triphosphate (ATP) monitoring system and ATP surface test kit. Hand piece holder showed the highest level of microbial contamination. In most of the clinics, QAC significantly reduced the levels of microbial contamination, and maintained antimicrobial activity for 4 to 6 months. QAC may be used effectively in dental clinics due to the duration of antimicrobial effect and the minimal exposure of chemicals and further studies are needed with large sample size.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1416-1429
• /
• 2005

In order to meet the increasing competitive pressures coupled with higher demands for component quality, whirling machines have been at the cutting edge of the automobile industry for more than 25 years. The hard whirling process can save on machining time and operation elimination. Hard whirling is done dry, without coolant. The chips carry away nearly all of the heat during cutting, leaving the workpiece cool and minimizing any thermal geometry variations. The surface finish and profile accuracy are close to grinding quality. Whirling machines usually consist of four major parts; 1) loading system that requires the necessary axial speeds, 2) head stock that needs high precision clamping and positioning system at the chuck and tailstock, 3) whirling unit that demands the high cutting speeds and cutting power fer cutting deep thread profiles and 4) unloading system that requires an easy workpiece unloading. Also, capabilities of the whirling machine can be improved by attaching a vision system to the machine. Most of whirling machines in Korean automobile industry are imported from the Leistritz company, Germany and the Hasegawa company, Japan. Tn this paper, a basic research will be performed to improve and enhance the existing whirling machines. Finally, a new Korean whirling machine will be proposed and developed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.1017-1026
• /
• 2009

The solar cell system operates by facing the sun-light. Minor cracks, static discharge, and thermal shock that can happen during production/testing phase can lead to degradation in performance during operation, since solar cells are exposed to extreme thermal/mechanical environment in space. In order to detect small cracks and internal damages in the solar cells due to thermal shocks, which are the core units of a solar cell system, expensive equipment, complicated test process, and much time are required. Therefore, a qualitative method for easily and quickly testing the 'health' of solar cell functionality is required. This dissertation describes a theoretical and technical grounds for quickly and easily evaluating the health of solar cells using electroluminescence effect of Gallium-Arsenide solar cells that are most widely used by spacecrafts in recent years. Also described in the dissertation is the technical issues and constraining factors for applying the proposed method to actual space-rated solar cell systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.95-104
• /
• 2018

Purpose: The purpose of this study is to analyze the factors affecting the longevity of failed prosthesis and the success rate of the prosthesis based on the data evaluated with the newly developed Korean Academy of Prosthodontics (KAP) criteria. Materials and methods: Evaluation was performed in the restored prosthesis for patients who visited the prosthodontics department of the 13 dental university hospitals and general hospitals. The status of the prosthesis was classified into four categories: Good, Fair, Bad, Worst. The success was recorded if only the category was classified in 'good'. The mean duration of failed prostheses and the success rate through Kaplan-Meier method were analyzed. Results: A total of 1,804 cases of prosthesis were evaluated: 810 cases of fixed dental prostheses (FDP), 519 cases of Removable Dental Prostheses (RDP), and 475 cases of implant prosthesis. The mean duration of failed FDP was $11.41{\pm}0.30years$ and the median was 10 years. The mean duration of failed RDP was $8.18{\pm}0.29years$ and the median was 7 years. The mean duration of failed implant prosthesis was $7.99{\pm}0.30years$ and the median was 7 years. The factors related to the failure were as follows: number of units, abutments, abutments treated with root canal, and plaque index in FDPs; treated and opposing dentition in RDPs; the number of implants, duration of use, and plaque index in implant prostheses. Conclusion: The average duration of failed prosthesis was 11.41 years for FDPs, 8.18 years for RDPs, and 7.99 years for implant prosthesis, according to the evaluation with newly developed KAP criteria.

• Korean Journal of Poultry Science
• /
• v.32 no.3
• /
• pp.211-217
• /
• 2005

This study was carried out to investigate the effects of Saccharomyces cerevisiae (wild yeast mutant), Saccharomyces cerevisiae hFeHLC (ferritin containgig yeast) and chelated Fe diets on the Productivity and egg qualify of laying hens. A total of 245 'Brown Tetra' layers 35 weeks aged was randomly alloted to seven dietary treatments : 1) control diet no iron added, 2) diet supplemented $0.1\%$ wild yeast mutant (YM03), 3) diet supplemented $1.0\%$ wild yeast mutant (YM03), 4) diet supplemented $0.1\%$ ferritin with yeast (YF04), 5) diet supplemented $1.0\%$ ferritin with yeast (YF04), 6) diet supplemented $0.01\%$ chelated Fe and 7) diet supplemented $0.1\%$ chelated Fe. The egg Production rate was significantly increased in layers 134 Fe supplemented diets (p<0.05). Egg weight was significantly reduced in layers fed $0.1\%$ chelated Fe diet (P<0.05). Fe content of egg yolk was significantly increased in $1.0\%$ YF04 and $0.1\%$ chelated Fe treatments (P<0.05). There were no significant differences in shape index, albumin index and yolk index of eggs of layers fed diets Fe supplementation (P>0.05). The haugh unit of eggs was significantly increased in layers fed YM03, YF04 and chelated Fe supplemented diets (p<0.05). TBA value of egg was significantly increased in different iron Fe treatments except of $0.1\%$ YM03 (P<0.05). The yolk cole. of eggs was significantly increased in $1.0\%$ YF04 diet (P<0.05).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.3
• /
• pp.25-34
• /
• 2020

This study examined the definition and major values, the designated procedures and types, and the designation trend in Korean scenic sites and national parks in the United States. Based on this, the analysis of the characteristics of the designation of the two natural heritages. The results are as follows; First, Scenic Sites has characteristics of complex heritage that includes academic, historical, and humanities values on the basis of landscape. As a natural heritage based on public nature, the U.S. National Park aims to contribute to the people's natural heritage and satisfy both ecological and historical values through the protection of the landscape. Second, the designation of a scenic sites are decided through deliberation by the Cultural Heritage Committee after the request of the owner, manager, or local government or by the authority of the head of the Cultural Heritage Administration. The designated survey is divided into basic resource surveys and resource surveys by type. Since the initial designation of the Sogeumgang Mountain in Cheonghakdong, Myeongju in 1970, the number of designated scenic sites was low until the 2000s, but the number of designated scenic sites has increased rapidly since 2006 due to the policy to promote the scenic site, and the proportion of natural and historical and cultural scenic sites has been balanced. The designation of the U.S. national park is decided by the Congress or the president, and the National Park Service makes a series of decisions on whether to conduct a special resource study of provisional resources through a preliminary inspection survey, whether to satisfy the criteria for designation of national parks based on the results of special resource research, and to prioritize them. The U.S. National Parks have been expanded not only by Congress but also by the president's empowerment to designate them as national monuments. With the integrated operation of the National Park Service, the number of designated cases increased as the national park included the heritage sites under the control of various ministries. In addition, a number of historical areas were designated by the enactment of the Historical Site Act, and recreational areas were designated to provide leisure space and classified and managed in a total of 18 units. Third, the comparison of the designation characteristics of the two heritage properties confirmed that the designation of natural heritage with complex value, the classification of types according to complementary designation system and resource characteristics, the establishment of the competent ministry and the balancing of the heritage according to the designation policy. The two heritages had the characteristics of complex natural heritages that met ecological, historical and academic values at the same time based on landscape and public nature. In addition, both countries have identified a system for deliberating the designation of heritage through a basic resource survey and an in-depth designation survey, and classified each type according to the characteristics of the resource. In addition, the policies for promoting scenic sites in Korea and the integrated operation of the National Park Service in the U.S. influenced the designated aspects of the two heritage sites, balancing natural heritage with historical and cultural heritage. Fourth, the resource types and conservation management methods of Scenic site and National Park were largely related. The natural areas of the U.S. National Park include types of natural monuments in Korea as major resources, and have characteristics similar to natural scenic sites. In addition, historical resources were similar to the criteria for designation of historical and cultural scenic sites in terms of landscape, and the aspects of war and celebrity-related relics were related to the types of historic sites. In terms of conservation management, the natural area of the U.S. national park has a way of keeping the original ecosystem intact, but the Korean natural heritage protection system is likely to be useful for focusing on the resource of viscosity. Meanwhile, historical resources include historical sites and historical and cultural scenic sites in the traditional era, but historical relics in the U.S. National Parks have set a time limit to modern times for war history and celebrity-related relics, and the active provision of entertainment programs based on existing resources was derived as a difference.