• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.97-115
• /
• 1991

본 시스템은 주어진 건축 부지위에 최대 건축 가능 공간을 산정한다. 한국 건축법규와 건축조례를 검토하여 가능공간을 산정하며 입력 데이타로는 부지 및 도로의 도형정보 및 부지의 위치정보등을 사용한다. 본 시스템은 일반적인 CAD S/W와 달리 Non-geometric 데이터를 많이 포함하여 데이터 구조 부분이 타 시스템과 많은 차이가 있으므로, 그에 따른 알고리즘을 자체 개발 적용하였다. 본 시스템은 건축 법규 추론 시스템의 결과에 따라 건축 가능 공간을 솔리드 모델로 생성한다. 이를 위해 평면만을 가지는 경계 표현법(B-Rep)솔리드 모델링 기능이 사용되었으며 생성되는 솔리드 모델은 Half-Edge데이터 구조로 저장되며 물성치 계산 기능, 은선제거기능, 음영처리기능들이 개발되었다. 적용시 각 단계를 시각화하고 출력하여 지금까지의 수작업을 배제하고 정확한 결과를 얻게 하여 설계시간을 최소화하고 건축주에게 만족한 결과를 얻게 한다.

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.113-129
• /
• 2022

A building's eco-friendliness is directly related to various values including the life cycle cost of a building. However, the conventional architectural design method has a limitation in that it cannot create an optimized case according to the surrounding environmental conditions. Therefore, the purpose of this research is to present a design assistance tool that can review planning cases optimized for the environmental conditions of the building site in the planning stage of architectural production. To achieve the purpose of the study, an algorithm for realizing 3D modeling of the region and analysis of the solar environment was produced based on the site contours, building, and road information from the digital topographic map provided by the National Geographic Information Institute. To examine the validity of the developed algorithm, a comparative experiment was conducted targeting the elevation direction of the existing building. As a result, it was found that the optimal elevation direction selected by the algorithm can receive higher insolation compared to the front facade of the main building.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.484-487
• /
• 2010

본 논문에서는 BIM(Building Information Modeling)의 핵심기술인 파라메트릭 기술을 기반으로 하여 철근콘크리트 구조물의 기둥부재 주철근 자동배근시스템을 구축함으로써 기존 프로그램에서 사용자가 직접 입력해야하는 변수의 수를 최소화하고 사용성과 정확성을 높이는 것을 목적으로 한다. 기존 철근배근 형상 자동 모델링에서 기둥철근의 자동 모델링은 기둥단면이 변하는 부분에서의 철근 배근과 정착 및 이음길이를 고려하지 않고 있다. 만약 고려하더라도 이용자가 직접 입력하는 방식이기 때문에 규모가 큰 건물일 경우 방대한 정보의 처리 미숙으로 인해 정확한 모델링을 기대하기 어려운 실정이다. 본 연구에서는 기둥 부재에 대하여 대상 건물을 선정하고 구조해석 모델링을 구축한 후 구조해석 결과 데이터베이스를 추출하여 얻은 정보와 건축구조설계기준에 따른 정착 및 이음 길이 산정에 관한 알고리즘을 구축하여 철근배근 형상 자동화 모듈에 적용하여 배근 자동 설계 및 자동 형상화 모듈을 생성하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.533-536
• /
• 2010

현재 우리나라 건설 사업에는 BIM의 관심과 사용이 급증하고 있다. BIM의 현주소는 실무에 적용하기 어려운 단점이 많고 IFC를 이용한 정보호환에 어려움이 많다. 결과적으로 Architectural BIM Tool에서 모델링한 프로젝트를 Structural BIM Tool에서 다시 모델링을 하고 MEP단계에서도 다시 한 번 더 BIM 모델링을 하는 반복 작업과 반복 작업으로 인한 인력손실과 프로그램간의 유통과 호환에 문제가 많은 것이 현 실정이다. 이에 본 연구는 타 분야와의 정보 공유를 설계단계에 따라 상세 수준별로 분류하여 설계/설비 분야와 정보를 공유하고 물리적 모델과 해석적 모델의 상이로 인하여 현 정보 교류에 많은 문제점이 있어 두 모델간의 정보변환을 위한 알고리즘을 개발하고 구현하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.612-614
• /
• 2018

Today, technologies that can acquire modeling data by using image are emerging. That 3D modeling production method, which is frequently utilized in contents industries, creates modeling data by using creator's intuitive sense, with drawings sketched without accurate measurement tools is also true. Recently, technologies that can facilitate modification and amendment of existing design by producing and reorganizing three-dimensional data of a sculpture through combination of image information are developing. This thesis gives suggestion of how to utilize and study the way to produce accurate three-dimensional modeling data by utilizing multiple image data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.375-384
• /
• 2005

Three dimensional urban models are being increasingly applied for various purposes such as city planning, telecommunication cell planning, traffic analysis, environmental monitoring and disaster management. In recent years, technologies from CAD and GIS are being merged to find optimal solutions in three dimensional modeling of urban buildings. These solutions include modeling of the interior building space as well as its exterior shape visualization. Research and development effort in this area has been performed by scientists and engineers from Computer Graphics, CAD and GIS. Computer Graphics and CAD focussed on precise and efficient visualization, where as GIS emphasized on topology and spatial analysis. Complementary research effort is required for an effective model to serve both visualization and spatial analysis purposes. This study presents an efficient way of using the CAD plans included in the building register documents to reconstruct the internal space of buildings. Topological information was built in the geospatial database and merged with the geometric information of CAD plans. as well as other attributal data from the building register. The GIS network modeling method introduced in this study is expected to enable an effective 3 dimensional spatial analysis of building interior which is developing with increasing complexity and size.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.113-118
• /
• 2017

Purpose: This study amis at proposing strategies on the basis of BIM techniques to promote the spread of industrialized wooden buildings for implementation of sustainable architecture. Method: We employed social network analysis (SNA) technique to identify the mutual influences among factors that hinder popularization of new Hanok as the industrialized wooden building. Four strategies were established to reduce the factors with serious influences on each category and stakeholder using BIM techniques. Result: it was demonstrated that the problems occurred in spreading new Hanoks can be reduced by changing the influence structure of social network according to the proposed strategies.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.277-287
• /
• 2022

ZEB is a building that increases the energy independence of the building itself, and new and renewable elements that can produce energy are essential, and BIPV is the most notable technology. In ZEB's design, BIPV should be planned early in the design, but BIPV plans are insufficient in the early stages. Therefore, this study derived elements for theoretical consideration of BIM and ZEB and analysis of ZEB independence rate based on BIM, a convergence design technology, and analyzed BIPV energy production and building energy consumption. Finally, by calculating the energy independence rate and reviewing the rating criteria in the project model, a basic research method for calculating the energy independence rate of ZEB at the beginning of the design was presented. Through this, it is expected that design productivity can be improved by supporting the decision of ZEB subjects.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.117-120
• /
• 2002

일반적으로 많은 건축물들은 형태의 규칙성에 기인된 일련의 정의된 규칙을 이용하여 축조된다. 하지만, 기존 사진실측으로 건축물에 대한 3차원 모델링을 수행하기 위해서는 많은 기준점의 배치, 영상의 피복범위에 따른 촬영점 선점, 중복도 고려 등 다소 복잡한 절차가 수반된다. 본 연구에서는 평행, 수직성, 평면과 같은 대상물에 대한 사전정보가 유용하게 적용될 수 있는 건축물의 3차원 재건분야에 직선측정기법을 적용함으로써, 기존의 까다로운 조건을 탈피하여 보다 효율적으로 3차원 모델을 재현해 본 후, 정확도 검증을 통해 건축물 사진측량 분야에 이러한 기법의 효용 가능성을 제시하고자 하였다.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.263-270
• /
• 2019

In order to meet the needs of integrated design process in architect industry, BIM(Building Information Modeling) education in university is urgently needed. However, the investigation of the current status of BIM education at 60 universities shows that most universities do not offer BIM education at all, or opened only one regular course for BIM education. The survey on BIM education for students shows that non-curricular activities brought bigger educational achievements than regular courses. Considering these findings and the practical restrictions of the universities, and through evaluation and feedback from professors as educational providers and working architects as professional users, the desirable strategy for BIM education in architect design was able to be suggested, which is consisted of regular curriculum of two courses and 40 hours non-curricular activities.