• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.40-41
• /
• 2020

This study has resulted in the following findings. First, Using more than 30% of GBFS to replace FA enabled bleeding control through improved fluidity. Moreover, it has been confirmed that effective strength and proper quality can be achieved when it was applied as a backfilling material with higher early strength than the base material. Second, When using more than 30% of FNS to replace sand, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Third, When using more than 30% of both GBFS and FNS in combination, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Also, it was confirmed that proper mixing of 15~60% of GF secured the effective strength and desired quality as a refiller and joint filler material.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.103-109
• /
• 2009

The construction industry has the highest death rate related to safety accidents of any industry. Furthermore, in contrast to other industries, where the death rate related to safety accidents has been steadily declining, both the death toll and the number of accidents in the construction industry have been on the rise. Construction accidents occur when various risks increase in an intertwined way to reach a tipping point; a moment when such factors cannot be tolerated any longer Conventional safety management methods have restrictions in terms of their ability to fully prevent all types of safety accidents. This research considers ways in which USN technology can be applied to safety management on a construction site, and derives a method of applying USN technology for safety management monitoring. The tasks related to safety management on construction sites, as well as the occurrence of accidents, are first analyzed. By analyzing the characteristics of construction accidents, the factors that must be a priority and the factors that can be a lower priority are derived. Finally, the configuration of a monitoring system for safety management on a construction site to which USN technology is applied is presented. It is expected that safety accidents can be prevented from occurring on construction sites by applying this cutting-edge USN technology.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.7-12
• /
• 2002

The purpose of this study is to design and to apply the self-compaction concrete mixture to field, having not only high strength but also compensation for shrinkage without thermal crack under 4 sides outer restraint of the member. In the experimental mix, replacement ratio of limestone Powder, CSA expansive additives, and unit water were selected as parameters, using portland blast-furnace slag cement. And, bleeding test, expansibility test, hydration heat analysis were performed. As a results, when Cement is replaced with 35% limestone Powder, 6% CSA expansive additives at unit water 175kg/$m^3$, demanded performances of fresh and hardened self-compaction concrete are accomplished in the field application.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.55-57
• /
• 2012

In this study, the field applicability on reducing the heat of hydration of mass concrete by using the hydration heat difference method is analyzed with the following summary. As a result of applying the hydration heat difference method by using low heating combination, the temperature difference between the central part and the surface part of mass material was reduced, and as a result of visual observation, there was no showing of cracks by the hydration heat on the upper surface part. Therefore, the cracking index of the field to apply this method was shown to be approximately 1.57 with very little crack occurrence probability of less than 3%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.197-202
• /
• 2005

This study started to confirm and prove for the applicability of the dry-process waterproofing system to cover the defects of the wet-process waterproofing system according to weather circumstance, foundation condition and maintenance, etc. This process has triple combined waterproofing system using asphalt sheet, metal sheet, engineering plastic film. It is not influenced by the concrete's crack as the foundation of the roof according to the movement of the building because the waterproofing system is designed for maintaining good quality by absorbing the stress of contraction and expansion that is occurred by the variation of temperature. Ali components used in this process can be recycled environmentally. The superiority of this process proved and reconfirmed through with the investigation of about 130 fields, around 30,000nf for two years.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.207-210
• /
• 2005

Information Technology (IT) makes a great contribution towards improvement of productivity in construction industry. Because most of researches of construction industry's IT are focused on the whole field of the industry or development of information system, however, these have no regard for conditions in fields. Thus, this study proposes the requirements in order to improve the productivity and efficiency of field execution of construction industry. To achieve this aim, the surveys are conducted of the problems and conditions of IT application on site workers and managers. As a result, the followings are suggested: (1) user training should be exercised continuously, (2) infrastructure of IT constructed, (3) total management system of field execution developed, and (4) the development of IT system focused on fields. Therefore, this study provides meaningful proposal that can be set up basic direction toward IT investment and IT system development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.21-24
• /
• 2005

In this paper, field application of mass concrete using setting time difference of super retarding agent is reported to reduce hydration heat of concrete placed at newly constructed apartment house in Daejeon. Horizontal placing lift is applied. According to test results,: slump and air content meets the requirement of target values. For compressive strength, it exceeds the nominal strength ordered by the costumer. For temperature history, maximum temperature of center at top section shows $25.6^{\circ}C$, and at bottom section, $35.4^{\circ}C$. According to naked eye's investigation, no hydration heat crack is observed at the surface of concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.63-66
• /
• 2011

The aim of this study is to estimate the field applicability of PBFM to replace in-site soil with pile backfill used to replace the existing cement paste. As results, the flowability, segregation and bleeding, and bond strength of PBFM was a good performance than that of the existing cement paste. But the skin friction of pile by Pile Driving Analyzer (PDA) and compressive strength was slightly decreased than that of the existing cement paste. However, as pile backfill materials, and in terms of economics and environment, the applicability of PBFM is considered very effective.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.90-91
• /
• 2017

Military camps deal with various types of explosives. For instance, military engineering unit conducts education and training for laying landmines. However, in case of land mine craters installed with regular-level RC, structural safety may be in danger thus there is a necessity to utilize High Performance Fiber-Reinforced Cement Composites (HPFRCC), which has high functionality in protection and blast resistance. Therefore, in this research we conducted an field application of land mine crater of HPFRCC, using the existing optimal fiber mixing ratio and ERCO addition ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.197-200
• /
• 2012

Concrete has cracks from shrinkage that necessarily result from in hardening process. Shrinkage-reduced concrete developed for crack reduction was utilized at a sample construction project. As a result, it is confirmed that crack initation ratio was remarkably reduced when compared to the case of normal concrete utilization. Additional sample project is supposed to use delay joints as well as srinkage-reduced concrete. Subsequently, the result will be reported. The greatest factor which affects in drying shrinkage is unit quantity of water. However, there are a lot off difficulties in field supervision because proper measuring means is not presented in present standard. Therfore, problems depending on ready-mixed concrete concrete companies should be improved by preparing the related standard assoon as possible.