• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.113-120
• /
• 2012

This study was conducted basic research for introduction plan of building dismantlement to reduce construction waste fundamentally and efficiently. The current domestic and overseas legislations relation with dismantlement were compared. In addition, the difference of construction waste treatment and pure demolition cost that were applied to dismantlement and general deconstruction method in building were compared. The total cost that was estimated to apply dismantlement in building was higher about 6% than that of general deconstruction.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.66-74
• /
• 2020

To prevent incident of demolition work the Building Management Act was implemented to manage demolition work. According to this law, buildings with the scale upper than 500㎡ of floor area are classified as permission to conduct the demolition work, however it may be hard to perform safety management at demolition work. In addition, the risk level of demolition work is varied with related to the structure type. So, the purpose of this study is to suggest the improvements of criteria on demolition work considering building structure types including small-scale structures such as masonry, wooden, and other structure. The research process was conducted by three steps. (I) Application of Building Management Act; (II) Analysis of demolition work by structure types; and (III) Subdivision of permission targets by building structure types. The result of this study, permission ratio was only 10% for total demolition work and 2.43% for masonry. Because the masonry, wooden, and other structure types are concentrated on a floor area of small-scale, the separate criteria of demolition work is need to prevent the accident and fatal incident. Through the results, the decision maker can be utilized (1) For the special building structure types, the criteria of enhanced safety management are applied by referring to the overseas law ; and (2) The demolition work can be considered by the criteria of separate permission in terms of structure types.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.841-849
• /
• 2023

The rising number of accidents during building demolition work has significantly heightened interest in this field. This study undertakes a comprehensive analysis of the essential capabilities required for building demolition experts, drawing on both domestic and international examples. This includes an examination of training courses for building demolition inspectors and the competencies mandated for structural demolition roles as per Korea's National Competency Standards(NCS). Furthermore, the study reviews the qualification tests and training programs for building demolition professionals in the United States, Japan, and England. The research concludes that the expertise needed for demolition construction professionals should be categorized into seven key domains: legal, structural, safety, planning, operational, constructional, and environmental aspects. These competencies are further divided across three professional tiers: technician, engineer, and manager.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.189-196
• /
• 2013

In order for efficient recycling and eco-friendly treatment of construction waste, there is a need to apply a building separation and dismantling technique early on in the stage of waste generation. This study was conducted to analyze the relevant domestic circumstances and propose the applicable range of buildings in order to introduce a building separation and dismantling system to Korea. For this purpose, related policies and systems implemented overseas and the current situation of buildings were examined, and the workability of separation and dismantling of buildings according to their uses was compared. Also, the economic impact of the separation and dismantling system was examined and a survey was conducted, seeking the opinions of the relevant companies regarding the need for the system and the selection criteria for eligible buildings. Based on the results, it was determined that it would be impossible to apply the separation and dismantling system to all buildings in Korea, considering the current technical power and economic situation, and that the system should be introduced in phases, according to the building classification determined based on floor area and use, as the cost may vary depending on a number of variables including the level of difficulty and field conditions.

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.195-204
• /
• 2011

During mechanical demolition of RC structures, weights of dismantling equipment and demolition waste of building are applied to unexpected load which did not be considered during the design of structural member. Nevertheless, the loading of dismantling equipment and dismantling process are mainly dependent on field managers' field workers' or experiences without considering safety of structural member by a structural engineer. It is urgently required that reflecting actual circumstance of mechanical demolition, safety evaluation method to evaluate the safety and the guideline for appropriate capacity of structural member to support dismantling equipment weight, be provided. Through site investigation and questionnaire on field workers, this paper proposed demolition waste load, load factor, strength reduction factor, and so on. These are essential to safe evaluation of a building, ready to demolition. Considering actual circumstance of mechanical demolition, safety evaluation method of building and design method of slab and beam was suggested to a dilapidated building. An capability to loading of dismantling equipment was proposed, applied to RC slab and RC beam. Therefore, the suggested safety evaluation method and the guideline for an capability to loading of dismantling equipment weight can reasonably evaluate the capacity of structural member in demolition and use effectively as increasing efficiency and improving safety of demolition through proper management of dismantling equipments.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.536-539
• /
• 2008

Construction waste is given a great deal of weight on the total waste. Because of many reconstructions, urban redevelopment projects and dismantlement of dilapidated building, construction waste that generated by dismantlement is having a great effect on total construction waste. Problems about waste treatment are increasing along with an amount of construction waste. Therefore, environmental problems that related to waste treatment become a social issue recently and problems about waste treatment are confronted with a major subject. A study focuses on giving solutions to treat construction waste through quantitative analysis of the problems about waste treatment.

• 월간 기계설비
• /
• s.226
• /
• pp.53-57
• /
• 2009

그동안 많은 논란이 있었던 석면문제가 또다시 도마 위에 올랐다. 최근 아기에게 바르는 파우더를 비롯하여 화장품 등에까지 석면공포가 확산됨에 따라 환경부는 석면이 주로 건축자재(80% 이상)에 사용된 만큼 국민건강 보호를 위해 건축물에 사용된 석면의 안전한 관리가 무엇보다 중요하다고 판단, 가이드라인을 제정, 시행에 들어갔다. 가이드라인의 주요 내용은 $\Delta$건축물에 사용된 석면함유 설비 또는 자재를 조사하여 석면지도 작성 및 6개월마다 훼손 여부 평가 관리 $\Delta$석면 해체 제거작업 과정에서 석면이 비산되지 않도록 주변 대기 중 석면농도 0.01개/cc(실내공기질 권고기준) 기준 설정 $\Delta$석면 해체 제거 작업 및 폐석면 처리 시 안전한 석면관리를 위한 준수사항 등이다. 이번 가이드라인은 건축물 사용단계부터 철거 폐기까지 전 생에에 걸친 석면 관리 방법 및 기준 등을 포함하고 있어 건축물 이용자, 철거지역 인근 주민의 석면 노출 차단에 기여할 것으로 기대된다. 환경부는 가이드라인을 자치단체, 다중이용시설 관리자, 건축물 철거업체 등을 통해 널리 알리는 한편, 노동부 등 관계부처와 함께 관련제도 보완 등 건축물 석면관리 개선방안을 오는 6월까지 마련할 계획이다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.101-109
• /
• 2009

This CW(Construction wastes) are increasing as construction industry is growing, so many countries make efforts to recycle CW. Korea also made a stipulation for recycling CW. But the main content of this stipulation is for using recycled aggregates. Advanced countries try to increase reuse rate of not only recycled aggregate but also other kinds of wastes. So they are adopting SDM(separating dismantlement) method and we are also planning to make the system for SDM. This study is about SDM analysis through construction field investigation and difference analysis between SDM and UDM comparing predictive amount by UDM with real generated amount by SDM. First, the generated amount of construction wastes by SDM is more than estimated amount by UDM, and mixed waste was specially reduced more than UDM. The warehouse is easier than the office building to applicate SDM. But still there is no manual for SDM in the site, so establishment of SDM is demanded.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.241-242
• /
• 2023

This paper discusses an innovative acoustic membrane developed by doAZ Co., Ltd., offering enhanced noise barrier and dust control for urban construction and demolition, surpassing the performance of traditional non-woven fabrics. The membrane is made from recyclable bubble sheets and designed to be seamlessly integrated into single and double-row scaffolding systems, ensuring broader applicability and sustainability.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.45-53
• /
• 2010

Safety management for building deconstruction works has been received extremely limited attention in the domestic construction society. Lack of systematic safety management practices and defective education system lead to the high level of fatality compared to that of advanced countries. Under the above domestic deconstruction environment, the authors intend to develope an integrated safety management guidelines that covers both mechanical and partial deconstruction works. Research outcome includes such specific educational materials as safety manual, checklists, pocket pamphlets, and e-manuals. Furthermore, to validate the applicability of the above materials, questionnaire survey and interviews were conducted. Detailed descriptions are provided for each research outcome.