• 한국주거학회논문집
• /
• 제16권4호
• /
• pp.101-108
• /
• 2005

Because of the airtightness of building, misuse of building materials and abuse of furniture, indoor air pollution problems have been increasingly concerned especially with apartment buildings. To improve the IAQ(Indoor Air Quality) in apartment building, this study was aimed at analyzing the factor of interior building material and furniture and calculating the ventilation rate of living room and bed room according to the surface area of interior building material and furniture in terms of VOCs(Volatile Organic Compounds) and HCHO(Formaldehyde). The results of this study are as follows; 1) In the concerned rooms, the living room has less pollution emission rate L(surface area/volume) than that of the bed room but, the living room needs more ventilation rate than that of the bed room because of built-in furniture in terms of VOCs and HCHO. 2) Built-in interior furniture is very important factor in IAQ problems of apartment building, but until now there is no provision about the built-in furniture, so that the provision must be regulated to control the IAQ. 3) To control the IAQ problem, the effective ventilation plans must be established according to the required ventilation rate by means of natural or mechanical ventilation method.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.1-7
• /
• 2011

본 연구에서는 한옥의 주요 부재에 대한 난연기술 개발 및 성능향상을 위한 기초단계로 미국, 일본, 유럽 및 국내의 건축물 마감재의 난연성능 관련 법규 및 시험기준 등을 비교 분석하여 각 부재의 난연성능 평가기준을 제시하고자 하였다. 미국의 경우 최근 통합되어 사용 중인 IBC(International Building Code) 및 NFPA(National Fire Protection Association) Code가 적용되고 있으며, 평가항목으로는 바닥재에 대해서는 임계열유속을, 천장 및 벽체에 대해서는 화염확산지수 및 연기발생량을 적용하고 있다. 유럽의 경우 통합된 Euroclass가 적용되고 있는데 바닥재와 비바닥재를 구분하여 난연성능 등급별로 불연성시험, 화염 전파성시험, 소규모실물화재시험, 발열량시험 등을 평가항목으로 두고 있다. 일본의 경우는 우리나라의 체계와 유사하였는데, 이들 각국의 기준을 비교분석하여 목조물인 한옥 부재에 적용할 수 있는 정량적인 난연성능 평가방법에 대해 고찰해 보았다.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.95-102
• /
• 2012

고층건축물의 구조부재로 적용되는 철골이나 고강도콘크리트로 시공된 경우 내화대책은 필수 불가결한 요소이며 특히, 고강도콘크리트로 적용된 경우 폭렬 등에 의한 단면결손이 발생하기 쉽기 때문에 이에 대한 대책이 필요하다. 즉, 내화성능 확보를 위해 온도상승을 허용범위 이내로 억제하는 대책이 필요하며 이 중 가장 효율적인 방법이 내화성 마감을 실시하는 것이다. 일반적으로 내화성 마감재에 사용되는 시멘트계 재료는 C-S-H, 및 CH가 단계적으로 열 분해되어 압축강도는 저하하게 된다. 내화성능을 발휘하기 위해 고온에서 강도감소가 작고 안정적인 고온특성을 보인다면 보다 효과적으로 성능 발현이 가능할 것이다. 본 연구는 고층건축물의 철골 및 콘크리트 부재의 효과적인 내화성능 발현을 위한 경량 내화성 마감재 개발을 위한 연구로 내화성능이 우수하다고 알려진 Alumino-silicate계 재료를 내화성 마감에 적용하기 위해 고온특성에 대해 검토하였다. 검토 결과, 플라이애시, 메타카올린 및 경량골재를 활용한 경량 내화성 마감재는 고온에서 비교적 안정적인 특성을 발현하여 내화성 마감재로의 효용성을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.77-80
• /
• 2005

The surface of concrete tiles is weak in moisture that it occurrenced efflorescence, but in the former study we found that it is possible to ensure moisture stability of concrete surface by autoclaving. So this study is to discuss the moisture stability and Physical Properties of high-strength glossy concrete according to time and temperature of autoclave curing. As the results, by increasing time and temperature of autoclave curing, compressive strength and surface hardness increased and glossiness decreased. In the case to 3 hour and $180^{\circ}C$ of autoclave curing, there is not effloescences in mosture stability test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.216-217
• /
• 2014

Optimum finishing position, thickness and phase change temperature of winter and summer season were selected and suitability of finishing materials was evaluated based on temperature measurement of specimens applying the coating material mixed phase change materials(PCM). As a result, when finishing position was interior and finishing thickness of coating material mixed n-Octadecane(28℃ PCM) was 4mm, thermal performance was effective. n-Octadecane in summer season and n-Hexadecane(18℃ PCM) in winter season are indicated effective on energy savings, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.218-219
• /
• 2014

The purpose of this study is to develop eco-friendly internal material of acrylic emulsion mortars using light-weight aggregate carrier which contains pyroligneous liquid. Four types of light-weight aggregates (vermiculite, perlite, charcoal, zeolite) that are widely used in building materials are selected and the properties such as adhesion, water absorption coefficient, antibiosis, crack and impact resistance are evaluated in accordance with KS F 4715. As a result, the properties of acrylic emulsion mortars using light-weight aggregate carrier are satisfied with KS requirements. The antibiosis is improved with increasing zeolite light-weight carrier content.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 추계학술논문발표회 논문집
• /
• pp.119-122
• /
• 2011

도심 건축물의 고층화가 빠르게 진행됨으로 인하여 국내외의 외장재 화재사고가 빈번히 발생하고 있다. 현재 국내 건축법에서는 외벽 마감재에 관한 관련법이 제정되어 있으나, 외장재의 수직 화재 확산에 대한 구체적인 화재안전성능 확보 기준 및 표준 시험 방법 등이 마련되어 있지 않다. 본 연구에서는 해운대 화재사고에 대한 사례 분석을 통하여 국내 제도 개선방향을 검토하고자 하였으며, 새로운 외장재 수직화재확산 성능 평가 기준 및 시헙법 도입을 제안하고자 하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.23-24
• /
• 2018

Most finishing materials are vulnerable to durability, humidity resistance and fire. And those products used formaldehyde to protect, during the manufacturing process. Also most finishing materials used adhesives to construction process indoor. All of these elements are major causes of releasing formaldehyde. In this study, concrete used by phytoncide was examined to remove the formaldehyde. As a result of the experiment, we found that compressive strength was increased and formaldehyde effectively removed by using mixture of cement matrix and phytoncide.

• KIEAE Journal
• /
• 제9권6호
• /
• pp.3-11
• /
• 2009

Building materials have a great impact on the health of a building's occupants. Thus, it is imperative that their health-related properties be taken into during the course of construction project. Unfortunately, no current database system exists that can provide information on the health performance of building materials at each stage of construction project management, from planning and design to building and maintenance. therefore, an inordinate amount of time and effort is required to choose the right health-friendly materials(DBHM). To solve this problem, this study aims at building a database management system for health-friendly building materials. It analyzes the health-related properties and performance of various materials, and proposes a database structure and operation algorithm. The system proposed in this study is expected to contribute to the objective evaluation of health-friendly building materials through the accumulation of relevant data.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.118-119
• /
• 2019

The exterior finish not only has a relationship to the functionality of building, but also the spatial aesthetics and visual perception. Common exterior finishes are wood, stone or acrylic based and etc. However, these finishes have different attributes which can alter the quality of the architecture, such as durability, moisture and fire resistance. To make up for the short-comings of these materials, we have used iron based resources for optimization. However, iron materials are expensive, so they have limitations in general use. In this study, we have experimented with various forms of exterior finishes using cement, which is the most efficient and widely used building material with several economic advantages. We experimented with different materials to use as the formwork for the gloss of the cement matrix. As a result, the gloss show that order of urethane, steel, and wood material.