• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.1
• /
• pp.32-37
• /
• 2005

The procedure of soil sampling for on-farm quick test of soil nitrate is very important to improve practical application without weighing or drying soil. To improve application of test strip reflectometer as a quick on-farm analytical procedure for the estimation of soil nitrate concentration, three sampling methods such as gravimetric sampling (GS), particle density sampling (PDS) and bulk density sampling (BDS) for on-farm analytical procedure were investigated with twelve soils of 45 to $281mg\;kg^{-1}$ nitrate nitrogen concentration. The nitrate nitrogen concentrations measured from different soils were compared with two analytical methods, ion electrode method as a standard laboratory analysis (SLA) and test strip reflectometer at three moisture conditions, viz. air dried soil, 20 and 40% of maximum water holding capacity (MWHC). Nitrate nitrogen concentration measured by test strip reflectometer was significantly correlated with that of SLA, and the coefficients of variation (CV) were in the range of 3.5 to 10.9%. These CV values less than 10.9% were thought to be acceptable for the measurement of soil nitrate as an on-farm real time analytical procedure. The nitrate nitrogen concentration by BDS for test strip reflectometer as well as ion electrode method was more similar to that of SLA compared with those by GS and PDS especially in case of moist soils. This result suggests that the BDS is more useful than GS and PDS in case of on-farm analytical procedure of soil nitrate for moist soils. Further the practical measurement by BDS could be improved by substituting the bottle cap with a larger container.

• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.211-218
• /
• 2003

For the Exp. 1, a total of sixty pigs (10.57$\pm$0.30kg average initial body weight) were used in a 15-d growth assay to determine the effect of dietary $\alpha$-1,6-galactosidase and $\beta$-1,4-mannanase on growth performance and nutrient digestibility. Dietary treatments included 1) CON (corn-dried whey-SBM based diet), 2) EC0.1 (CON diet+0.1% enzyme complex of $\alpha$-1,6-galactosidase and $\beta$-1,4-mannanase). Through the entire experimental period, gain/feed of pigs fed EC0.1 diet was higher (0.43 vs 0.52) than that of pigs fed CON diet (P<0.05). Pigs fed EC0.1 diet showed significant (P<0.05) improvement in dry matter (74.82% vs 82.41%) and nitrogen (70.59% vs 77.88%) digestibilities compared to pigs fed CON diet. For the Exp. 2, a total of thirty six pigs (22.30$\pm$0.45kg average initial body weight) were used in a 30-d growth assay to determine the effects of dietary $\alpha$-1,6-galactosidase and $\beta$-1,4-mannanase in low energy diet on growth performance and nutrient digestibility. Dietary treatments included 1) AME (adequate ME diet), 2) AME+EC0.1 (AME diet+0.1% enzyme complex) and LME+EC0.1 (low ME diet + 0.1% enzyme complex). Through the entire experimental period, average daily feed intake of pigs fed enzyme complex supplemented diets was higher than that of pigs fed CON diet (P<0.05). Also, pigs fed AME+EC0.1 diet showed significant (P<0.05) increase in ADFI (1,401g vs 1,733g) compared to pigs fed CON diet. Pigs fed enzyme complex supplemented diet showed significant (P<0.05) improvement in dry matter and nitrogen digestibilities compared to pigs fed CON diet. In conclusion, the results obtained from these feeding trials suggest that the supplementation of $\alpha$-1,6-galactosidase and $\beta$-1,4-mannanase was an effective means for improving growth performance and dry matter and nitrogen digestibilities in nursery and growing pigs.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.27-38
• /
• 2009

To investigate the feasibility of refuse derived fuels (RDFs) combined of sewage sludge and combustible wastes such as substitutive fuels instead of a stone coal, several different RDFs made with different mixtures of sewage sludge and combustible wastes were analyzed by various experiments. The combustion characteristics for the RDFs were investigated by analyzing fuel gases, and heating values were also measured by a bomb calorimeter. The fundamental properties such as moisture contents, ratios of combustible materials, amounts of ashes, heavy metals, ratios of each chemical elements and heating values were analyzed in accordance with mixing ratios of wt(%) for researching the characteristics of the RDFs. $RDF_{k-1}$ was made of mixing materials which were dried sewage sludge, food wastes and combustible wastes. $RDF_{k-2}$ was made of mixing materials which were peat-moss, tar and sewage sludge. Combustion experiments were carried out at the optimal conditions which were m=2 under air-fuel condition and $850^{\circ}C$. The retention times in the combustor were set at 5, 10 and 15minutes. 50 g of RDFs was put in the combustor for each experiments. The ranges for heating values of $RDF_{k-1}$ with different mixing ratios were from 6,900 kcal/kg to 8120 kcal/kg. The ranges for heating values of $RDF_{k-2}$ with different mixing ratios were from 4,014 kcal/kg to 8,050 kcal/kg. As a result of this study, the heating values, moisture contents, components of chemical elements and mixing ratios of the materials in RDFs had big effects on the efficiency of the combustion. In $RDF_{k-1}$, the higher amounts of combustible wastes in the mixtures, the higher heating values, concentrations of $C_xH_y$ and amounts of ashes were produced. In $RDF_{k-2}$, the higher tar amounts in the mixtures caused the higher heating values, amounts of ashes, concentrations of CO gas and CxHy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.4
• /
• pp.189-195
• /
• 1978

Using the skins of conger eel, Astroconger myriaster, and hagfish, Eptatretus burzeri, from fillet manufactory, the optimum conditions of skin glue processing were investigated and physical ana chemical properties of the product were also determined. The yields of conger eel and hagfish skin to the total body weight were $10.6\%$ and $11.4\%$, respectively. The optimum processing conditions for conger eel skin glue were the extraction of skins which were previously tinted with $0.3\%$ calcium hydroxide solution for one hour, in water at pH 5.5 and $60^{\circ}C$ for four hours. The additional water was six times sample weight. In case of the hagfish skin glue, the liming time with $0.3\%$ calcium hydroxide solution was suitable for three hours, and the skins were extracted with water as much as nine times sample weight at pH 5.0 and $60^{\circ}C$ for three hours. The contents of crude protein of conger eel and hagfish skin glue were $91.5\%$ and $90.2\%$, respectively. The content of crude lipid was slightly higher than that of chemical grade gelatin. Relative viscosity, melting point, gelation temperature and jelly strength of conger eel skin glue were 13.6, $15.2^{\circ}C$, $6.2^{\circ}C$ and 13.0g respectively and those of hagfish skin glue were 12.9, $14.8^{\circ}C$, $4.3^{\circ}C$ and 23.3g respectively. The turbidity of conger eel skin glue and hagfish skin glue were slightly superior to those of dry glue.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.253-261
• /
• 2005

Catalytic wet oxidation of ppm levels of trichloroethylene (TCE) in water has been conducted using $TiO_2$-supported cobalt oxides at a given temperature and weight hourly space velocity. 5% $CoO_x/TiO_2$ might be the most promising catalyst for the wet oxidation at $36^{\circ}C$ although it exhibited a transient behavior in time on-stream activity. Not only could the bare support be inactive for the wet decomposition reaction, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. Characterization of the $CoO_x$ catalyst by acquiring XPS spectra of both fresh and used Co surfaces gave different surface spectral features of each $CoO_x$. Co $2p_{3/2}$ binding energy of Co species exposed predominantly onto the outermost surface of the fresh catalyst appeared at 781.3 eV, which is very similar to the chemical states of $CoTiO_x$ such as $Co_2TiO_4$ and $CoTiO_3$. The spent catalyst possessed a 780.3 eV main peak with a satellite structure at 795.8 eV. Based on XPS spectra of reference Co compound, the TCE-exposed Co surfaces could be assigned to be in the form of mainly $Co_3O_4$. XRD measurements indicated that the phase structure of Co species in 5% $CoO_x/TiO_2$ catalyst even before reaction is quite comparable to the diffraction lines of external $Co_3O_4$ standard. A model structure of $CoO_x$ present on titania surfaces would be $Co_3O_4$, encapsulated in thin-film $CoTiO_x$ species consisting of $Co_2TiO_4$ and $CoTiO_3$, which may be active for the decomposition of TCE in a flow of water.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Clean Technology
• /
• v.19 no.3
• /
• pp.264-271
• /
• 2013

In this study, we optimized the removal condition of contaminants attached on the scrap surface to recycle the scrap generated from the Zr alloy tube manufacturing process back to the nuclear grade. The main contaminant is remnant of watersoluble cooling lubricant that is used in the pilgering manufacture during the tube production, and it is assumed to be compressed and carbonized on the surface of tube. Zirlo alloy tube of ${\phi}9.50mm$, which has high occurrence frequency of scrap, was selected as the object to be cleaned, and cleaning abilities of reagents were evaluated by measuring the characteristics of contaminants remained and by analyzing the surface of the tube after cleaning process. For evaluation of each cleaning agent, we selected two types of sodium hydroxide series and three types of potassium hydroxide series. Furthermore, to confirm dependence on tempe-rature and ultrasonic intensities, cleaning at the room temperature, $40^{\circ}C$, and $60^{\circ}C$ was conducted, and results showed that higher the cleaning temperature and higher the ultrasonic intensity, better the cleaning effect. As a result of the bare-eye inspection, while the use of sodium hydroxide provided satisfactory condition on the tube surface, the use of potassium hydroxide series provided satisfactory condition on the tube surface only when the ultrasonic intensity was over 120 W. In the cleaning effect analysis using the gravimetric method, cleaning efficiency of sodium hydroxide series was as high as 97.6% ($60^{\circ}C$, 120 W), but since the tube surface condition was poor after the use of potassium hydroxide, the gravimetric method was not appropriate. In the analytical result of surface contaminants on the tube surface, C, O, Ca, and Zr were detected, and mainly C and O dominated the proportion of contaminants. It was also found that the degree of cleaning on the tube affected the componential ratio of C and O; if the degree of cleaning is high, or if cleaning is well-conducted, the proportion of C is decreased, and the proportion of O is increased. Based on these results, optimal cleaning for application in the industry can be expected by categorizing cleaning process into three steps of Alkali cleaning, Rinsing, and Drying and by adjusting cleaning parameters in each step.

• Journal of the Korean Geographical Society
• /
• v.48 no.1
• /
• pp.87-111
• /
• 2013

Regional disparities between eastern and western regions is the most of serious problem for balanced regional development in Turkey. The Southeastern Anatolia Project (GAP) is being implemented to eliminate these regional development disparities. The work that was initially planned as predominantly for hydraulic energy production to utilize water resources of the Tigris and Euphrates rivers more effectively was later transformed into an integrated multi-sector regional development project. This study noted that this region had very limited cash crop production because of the constraints of semi-arid climate of the southeastern region, however, later, it has changed Turkey's major cotton producing region since Southeastern Anatolia Project carried out. Therefore, this study investigated background, process, and content of the Southeastern Anatolia Project with respect to high cotton productivity in this region and examined the dynamic changes of cotton productivity in this region. In addition, Sanliurfa prefecture is one of the main development axes of the Southeastern Anatolia Project, because government investments are concentrated on this prefecture. Therefore, this study examined the background and process of cotton farming growth in this prefecture. In 2011, Sanliurfa prefecture produced 37.6% of Turkey's total cotton production. This is mainly due to agricultural infrastructure expansion such as land consolidation, irrigation, roads and farm roads. Also, it is one of the main factor that subsidies paid to farmers for cotton cultivation. The introduction of irrigation has dramatically changed the direction of seasonal migration of this area. Prior to irrigation, this area had a serious social issue about out-migration for seasonal labor to other areas. However, the introduction of irrigation made this area that changed to in-migration and intramigration for cotton cultivation. Irrigation water is supplied to farmers through the WUAs (Water User Associations) that handed over irrigation water management, operation from DSI (General Directorate of State of Hydraulic Works). However, the WUAs are under the influence of Ashiret, a traditional feudal social structure. Because of this reason, it does not have an efficient management for farmers. Also, it is one of the reasons that this area does not have autonomous farmer organization.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.356-361
• /
• 2007

Cyanobacteria are a very old group of prokaryotic organisms that produce very diverse secondary metabolites, especially non-ribosomal peptide and polyketide structures. Although some cyanobacteria produce lethal toxins such as microcystins and anatoxins, some may be useful either for development into commercial drugs or as biochemical tools. Detection of unknown secondary metabolites was carried in the present study by a screening of 98 cyanobacterial strains from Cyanobiotech GmbH in order to establish a screening process, isolate pure substances and determine their bioactivities. A degenerated polymerase chain reaction technique as molecular approaches has been used for general screening of NRPS gene and PKS gene in cyanobacteria. A putative PKS gene was detected by DKF/DKR primer in 38 strains (38.8%) and PCR amplicons resulted from a presence of NRPS gene were showed by MTF2/MTR2 primer in 30 strains (30.6%), respectively. A screening of interesting strains was performed by comparing PCR screening results with HPLC analyses of extracts. HPLC analysis for a detection of natural products was performed in extracts from biomass. 5 strains were screened for further scale-up processing. 7 pure substances were isolated from the scale-up cultures and tested for bioactivities under consideration to purity, amount and molecular weight of substances. One substance isolated from CBT 635 showed cytotoxic activity. This substance may be regarded as Microcystin LR.

• Journal of Aquaculture
• /
• v.17 no.3
• /
• pp.187-196
• /
• 2004

This study was carried out to investigate changes in biochemical composition of rotifer, Brachionus plicatilis, enriched with the commercial enrichments (Enhance, Advantage, Algamac-2000, DHA-Selco and Advantage ＋ Chlorella) at various durations of enrichment (0, 6, 12 and 24 hr) to improve the growth and survival of marine fish larvae. Total lipid content of rotifers enriched with various enrichments tended to increase with an increase in durations of enrichment up to 6 hr, but after that, was not significantly affected by enrichment materials. However, total protein content of rotifers enriched groups except for Advantage＋Chlorella decreased with the increase in duration of enrichment. The highest protein/lipid ratio showed 2.7 in rotifer enriched with the Advantage ＋Chlorella. The phospholipid/lipid ratio of rotifer enriched with the Enhance, Advantage and Advantage＋Chlorella groups was significantly higher than that of enriched rotifer with the Algamac-2000 and DHA-Selco groups. The highest DHA level, 2.5%, of rotifer enriched for 24 hr was obtained in the Advantage, but was not significantly different among other groups, except for Algamac-2000. No significant difference in DHA level of rotifer enriched with the DHA-Selco, Algamac-2000 and Advantage＋Chlorella groups was observed between l2h and 24hr of enrichment. The DHA/EPA ratio in the enriched rotifers varied among enrichment material groups, ranged from a high level of 11.1：1 in the Advantage＋Chlorella group to a low level of 4.1：1 in DHA-Selco group. The results from this study indicate that rotifers enriched with Enhance, Advantage and Advantage＋Chlorella seemed to be effective to improve nutritional value of rotifer for marine fish larvae because phospholipid, DHAJEPA and protein/lipid ratios of rotifer enriched with Enhance, Advantage＋Chlorella were higher than those of rotifer enriched with either DHA-Selco or Algamac-2000. Especially, supplementation of the Chlorella to these enrichments would appear to be effective for improvement of fish larval performance because of no reduction of protein level in rotifer, which is critical for growth of fish larvae.