• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.463-471
• /
• 2008

This study investigated the clinical effectiveness and safety of sealed bleaching compared to conventional in-office bleaching using a randomized clinical trial of split arch design. Ten participants received a chairside bleaching treatment on the upper anterior teeth, and each side was randomly designated as sealed or control side. A mixture of Brite powder (PacDent, Walnut, USA), 3% hydrogen peroxide and carbamide peroxide (KoolWhite, PacDent, Walnut, USA) were used as bleaching agent. The control side was unwrapped and the experimental side was covered with a linear low density polyethylene (LLDPE) wrap for sealed bleaching. The bleaching gel was light activated for 1 hour. The tooth shades were evaluated before treatment, after treatment, and at one week check up by means of a visual shade (VS) assessment using a value oriented shade guide and a computer assisted shade assessment using a spectrophotometer (SP). The data were analyzed by paired t-test. In the control and sealed groups, the visual shade scores after bleaching treatment and at check up showed statistically significant difference from the preoperative shade scores (p<.05). The shade scores of the sealed group were significantly lighter than the control immediately after bleaching and at the check-up appointment (p<0.05). Compared to prebleaching status, the ${\Delta}E$ values at post bleaching condition were $4.35{\pm}1.38\;and\;5.08{\pm}1.34$ for the control and sealed groups, respectively. The ${\Delta}E$ values at check up were $3.73{\pm}1.95\;and\;4.38{\pm}2.08$ for the control and sealed groups. ${\Delta}E$ values were greater for the sealed group both after bleaching (p<.05) and at check up (p<.05). In conclusion, both ${\Delta}E$ and shade score changes were greater for the sealed bleaching group than the conventional bleaching group, effectively demonstrating the improvement of effectiveness through sealing.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.472-480
• /
• 2008

This study was conducted to evaluate the influence of the C-factor on the bond strength of a 6th generation self-etching system by measuring the microtensile bond strength of four types of restorations classified by different C-factors with an identical depth of dentin. Eighty human molars were divided into four experimental groups, each of which had a C-factor of 0.25, 2, 3 or 4. Each group was then further divided into four subgroups based on the adhesive and composite resin used. The adhesives used for this study were AQ Bond Plus (Sun Medical, Japan) and XenoIII (DENTSPLY, Germany). And composite resins used were fantasists (Sun Medical, Japan) and Ceram-X mono (DENTSPLY, Germany). The results were then analyzed using one-way ANOVA, a Tukey's test, and a Pearson's correlation test and were as follows. 1. There was no significant difference among C-factor groups with the exception of groups of Xeno III and Ceram-X mono (p<0.05). 2. There was no significant difference between any of the adhesives and composite resins in groups with C-factor 0.25, 2 and 4. 3. There was no correlation between the change in C-factor and microtensile bond strength in the Fantasista groups. It was concluded that the C-factor of cavities does not have a significant effect on the microtensile bond strength of the restorations when cavities of the same depth of dentin are restored using composite resin in conjunction with the 6th generation self-etching system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.2
• /
• pp.115-127
• /
• 1973

Leaf discoloration of IR667 lines (tropical) and leading locals (temperate) in fields was classified according to the probable causes and nutritional disorder due to soil reduction in 1972 was investigated. 1. The causes of leaf discoloration in IR667 were low air temperature, soil reduction, seed born, insect bite, nitrogen depression, overdose pesticide, strong wind, early senescence and unknown one. 2. Leaf discoloration due to soil reduction which has been called Sageumbyeong by famers, was caused by the heavy application of $Ca(OH)_2$, compost and poor drainage followed by Zn and K deficiency and Fe toxicity. 3. About 30 days after transplanting deficiency concentration of K and Zn in leaf blade appears to be less than 2.0% and 20ppm respectively, and greater than 200ppm, 500ppm, and 1.0% respectively for toxicity or excess of Fe, Mn and Ca. and in the shoot 2.4% for K, 30ppm for Zn and 800ppm for Fe. The value of K/Ca should be greaterthan 2.0 for health. 4. When plants were damaged by soil reduction the contents of N, P, Ca, Mg, Fe, Mn, Na in shoot were increased and those of K, Zn, Si were decreased. 5. IR667 lines show in shoot higher content of N, P, Ca, Mg, Si, Na, and lower content K, Zn, Fe, Mn and lower root activity than local leading varietles in either healthy or disieased case, indicating IR667 lines are likely more suseptible to soil reduction damage. 6. Normal soil was less than 6.5 of pH and greater than -50 mv of Eh, but pH of problem soil was ranged from 6.7 to 7.4 and Eh from -100 to -190. 7. The root activity (${\alpha}$-naphthylamine oxidation) decreased at early stage of soil redudtion damage, then increased with severity and at the end it decreased again, but IR667 lines showed always lower root activity than local ones.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.52-60
• /
• 2000

This study was conducted to gain basic data for alleviation of gas emission and conservation of healthy soil environment by investigating an aspect of gas emission and microbial diversity due to the supplement of different fertilizers after application with a livestock manure compost in greenhouse soils. Green pepper was cultivated in clay loamy soil from April to August. Before planting, a livestock manure compost was applied with $741mg\;ha^{-1}$ on the basis of the phosphate content contained in compost. And then, deficient nitrogen for cropping was supplemented with either quick-acting fertilizer of urea or a controlled slow release fertilizer made from urea formaldehyde(U/F). $NH_3$ and R $NH_2$ gases emitted from soil showed a low concentration in the early stage but a maximum in 27 days after planting, then decreased rapidly and not detected after 33 days. Their average concentrations were 42% and 85% lower in the treatment of slow release fertilizer than that of urea fertilizer, respectively. $CO_2$ gas emitted under urea fertilization was ranged from 1,200 to $3,200mg{\ell}^{-1}$ and that in slow release fertilizer was $900{\sim}2,650mg\;{\ell}^{-1}$. The average concentration of urea treatment was $2,260mg{\ell}^{-1}$ and 30% higher than that of slow release fertilizer. The treatment of slow release fertilizer with the lapse of cropping time populated larger in numbers of bacteria, actinomycetes, nitrate bacteria and nitrate reduction bacteria, and ratios of bacteria and actinmycetes to fungi than that of urea fertilizer. But the number of fungi was higher in the treatment of urea fertilizer and denitrifying bacteria showed a similar trend in both treatments. The microbial diversity index, which calculated with numbers of 6 species of microorganisms, was decreased with increasing of growing stage in the range of 0.1 to 0.35 and that was higher in the tratment of slow release fertilizer than urea.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.318-330
• /
• 2009

A high heat flux test facility using a graphite heating panel was constructed and is presently in operation at Korea Atomic Energy Research Institute, which is called KoHLT-1. Its major purpose is to carry out a thermal cycle test to verify the integrity of a HIP (hot isostatic pressing) bonded Be mockups which were fabricated for developing HIP joining technology to bond different metals, i.e., Be-to-CuCrZr and CuCrZr-to-SS316L, for the ITER (International Thermonuclear Experimental Reactor) first wall. The KoHLT-1 consists of a graphite heating panel, a box-type test chamber with water-cooling jackets, an electrical DC power supply, a water-cooling system, an evacuation system, an He gas system, and some diagnostics, which are equipped in an authorized laboratory with a special ventilation system for the Be treatment. The graphite heater is placed between two mockups, and the gap distance between the heater and the mockup is adjusted to $2{\sim}3\;mm$. We designed and fabricated several graphite heating panels to have various heating areas depending on the tested mockups, and to have the electrical resistances of $0.2{\sim}0.5$ ohms during high temperature operation. The heater is connected to an electrical DC power supply of 100 V/400 A. The heat flux is easily controlled by the pre-programmed control system which consists of a personal computer and a multi function module. The heat fluxes on the two mockups are deduced from the flow rate and the coolant inlet/out temperatures by a calorimetric method. We have carried out the thermal cycle tests of various Be mockups, and the reliability of the KoHLT-1 for long time operation at a high heat flux was verified, and its broad applicability is promising.

• Journal of Wetlands Research
• /
• v.8 no.2
• /
• pp.53-64
• /
• 2006

A study on the restoration process of a stream ecosystem and the water quality renovation technique by removing algae, vegetation and fish monitoring as evaluating the removal of the algae by dietetic characteristics of fishes were performed on Sangdong stream in the B city after stream restoration it to the artificial stream as the cases, restoring urban stream into close-to-nature stream are being increased domestically with the aim of ecological city. As a result, restoration and rehabilitation of the fundamental stream ecosystem was well maintained 4 years later the reclamation at the moment and total 93 diagnosis which were all vascular plant phylum including 44 families, 73 genuses, 79 species and 14 varieties in flora and vegetation community were observed. 3 families, 8 species and 354 populations in total among Fishes were found and Pseudorasbora Parva, Cyprinus Carpic and Carassius Auratus strongly resistant to water pollution were dominantly appeared in order of 50.5% of Pseudorasbora Parva 21.2% of Cyprinus Carpic, 20.9% of Carassius Auratus, 7.1% of Macropodus chinensis and 0.3% of Misqurnus anguillicaudatus according to relative richness index. It turned out to be that Cyprinus Carpic ingests algae over 90% and Carassius Auratus takes it over 30% according to the analysis about the alimentary object of the fishes as a consequences of algae's excrescent from characteristics of the tested experimental stream. It is reported that a Cyprinus Carpic, about 34 cm in length, ingested wet-weight 43.2g algae on the rough analysis toward the sample which makes us recognize how effective a macro community Cyprinus Carpic is for removing algae.As a consequence of this research, the effect of stream ecosystem characteristics and water quality purification could not be expected by aquatic plants and trees which were eliminated at experimental stream. From now on, a close-to-nature stream should be formed of ecological hydraulic and hydrologic engineered modeling from the beginning so that it can perform the water quality purifying function. It is determined that the structure of food chain will be abundantly influenced by the induction of oversized macro community like Cyprinus Carpic because a biomass of a consumer of higher order is increased. It is estimated that the removal algae by fishes is not effective despite in some cases of dietetic characteristics so much more studies should be executed in the future.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.211-219
• /
• 2006

The UET(ultrasound excited thermography) for the ,eat-time diagnostics of the object employs an infrared camera to image defects of the surface and subsurface which are locally heated using high-frequency putted ultrasonic excitation. The dissipation of high-power ultrasonic energy around the feces of the defects causes an increase In temperature. The defect's image appears as a hot spot (bright IR source) within a dark background field. The UET for nondestructive diagnostic and evaluation is based on the image analysis of the hot spot as a local response to ultrasonic excited heat deposition. In this paper the applicability of VET for fast imaging of defect is described. The ultrasonic energy is injected into the sample through a transducer in the vertical and horizontal directions respectively. The voltage applied to the transducer is measured by digital oscilloscope, and the waveform are compared. Measurements were performed on four kinds of materials: SUS fatigue crack specimen(thickness 14mm), PCB plate(1.8 mm), CFRP plate(3 mm) and Inconel 600 plate (1 mm). A high power ultrasonic energy with pulse durations of 250ms Is injected into the samples in the horizontal and vertical directions respectively The obtained experimental result reveals that the dissipation loss of the ultrasonic energy In the vertical injection is less than that in the horizontal direction. In the cafe or PCB, CFRP, the size of hot spot in the vortical injection if larger than that in horizontal direction. Duration time of the hot spot in the vertical direction is three times as long as that in the horizontal direction. In the case of Inconel 600 plate and SUS sample, the hot spot in the horizontal injection was detected faster than that in the vertical direction

• Journal of Hospice and Palliative Care
• /
• v.4 no.1
• /
• pp.4-13
• /
• 2001

Purpose : Since the acquired immune deficiency syndrome (AIDS) was first recognized in the United States in the summer of 1981, the number of these patients has been increasing in the world. But do not find out a cure and a vaccine for ARS (5). And so, the best treatment for AIDS is the prevention. People can find out accurate knowledge about AIDS, and they can prevent themselves from AIDS approximately 100%. In this study, we investigate with AIDS knowledge and attitudes in unmarried young men (<24 age) and suggest accurate preventive education for AIDS and good sexual behaviors. Methods : Un-married young soldiers and college students who were not diagnosed as AIDS until June 30, 2000 were included in the study. The study included a total of 923 men. A self evaluation questionnaire, included questions on 36 items(the part of demographic data - 9; the part of knowledge - 20; the part of attitudes - 8), was drawn up by three physicians. The demographic data, AIDS knowledge and attitudes were analyzed by chi-square analysis, and the total score of AIDS knowledge - comparison according to demographic factors and attitudewere analyzed by one-way ANOVA test. Results : In demographic characteristics, as for the first recognized time of AIDS, most of men knew it when they were in their middle school, as for sources of information on AIDS, most of them knew it through the TV-media, and as for the educational need about AIDS, most of them agreed with it. In AIDS knowledge, mean scores were $14.0{\pm}1.8$ (70.3%). Items of the misconceptions concerning AIDS, reported as less than 50% correct answers, were 6 among 20 items (30%). In AIDS attitudes, as for the item about that if I will be an AIDS patient, I will have an AIDS treatment, it showed that the number of men agreed with 759 (82.2%), and as for the item about that I will help for AIDS patient even though I don't know him, it showed that the number of them agreed with 412 (45.8%). In correlation of AIDS knowledge and demographic factors, the mean scores of knowledge of men with higher than college degree were higher than them of others. The mean scores of knowledge of men with total income of family with more than US$1667 were higher than them of others. The mean scores of knowledge of men with sources of information on AIDS through the TV-media were higher than them of others. And the mean scores of knowledge of men with past medical history of STD(sexually transmitted disease) were higher than them of others. Conclusions : The higher the knowledge he has, the lower the possibility of risk and the more positive the attitude he has. And then we think that the education program for AIDS will be included as a regular part of the curriculum in high school, and young men must be effectively educated by it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.163-174
• /
• 2017

This study analyzed how Korean firms' recapitalization affects their capital structure decision and firm value. Recapitalization was categorized into three groups according to the influence of the debt to equity ratio: debt ratio-increasing-recapitalization(capital reduction with refund, cash dividend), debt ratio-unchanging-recapitalization (capital reduction without refund, retirement of repurchased stocks), and debt ratio-decreasing-recapitalization(exercise the rights for convertible bonds, bond with stock warrants, exchangeable bonds and stock options). This article highlights how the relationship between the firms' recapitalization and the capital structure decision driven by the change in debt to equity ratio through the recapitalization should affect the firm value. The whole recapitalization sample used for this analysis comprised 22,814 enterprises listed on the Korea Exchange that were analyzed over the 16-year period from 2000 to 2015. To summarize the results of this Panel Data Analysis, firstly, when a firm executes debt ratio-increasing-recapitalization and debt ratio-decreasing-recapitalization at the period of t-1, the debt to equity ratio, which is increased or decreased, should affect the firm's debt capacity in the same period, then, at the period of t, the firm establishes a leverage policy to readjust the debt to equity ratio the other way around. These adjustments of debt-paying-ability from the leverage policy, including the capital structure decision, finally affect the firm value. Secondly, when a firm implements the debt ratio-unchanging-recapitalization in the period of t-1, the debt to equity ratio, which is neutral, should not affect the firm's capital structure decision. But, the firm value is positively affected by the influence of that recapitalization. Conclusively, we acknowledge a firm which carries out the recapitalization balances its capital structure to the optimal level of leverage and that the capital structure decision positively affects the corporate value.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.350-355
• /
• 2009

Bond strength depends on characteristics of bonding surface and restorative technique. The majority of studies dealing with dentin bond strength were carried out on flat bonding surface, therefore, difference of bond strength between axial wall and pulpal wall is not clear yet. This study evaluated bonding difference between cavity walls in class I composite resin restoration with different filling techniques. Twenty extracted caries-free human third molars were used. Cavities were prepared in 6 ${\times}$4 ${\times}$3 mm box-type and divided into four groups according to filling technique and bonding surface: Group I; bulk filling - pulpal wall, Group II; bulk filling - axial wall, Group III; incremental filling - pulpal wall, Group IV; incremental filling - axial wall. Cavities were filled with Filtek $Z250^{(R)}$(3M/ESPE., USA) and Clearfill SE $bond^{(R)}$(Kuraray, Japan). After 24 hour-storage in $37^{\circ}C$water, the resin bonded teeth were sectioned bucco-lingualy at the center of cavity. Specimens were vertically sectioned into 1.0 ${\times}$1.0 mm thick serial sticks perpendicular to the bond surface using a low-speed diamond saw (Accutom 50, Struers, Copenhagen, Denmark) under water cooling. The trimmed specimens were then attached to the testing device and in turn, was placed in a universal testing machine (EZ test, Shimadzu Co., Kyoto, Japan) for micro-tensile testing at a cross-head speed of 1 mm/min. The results obtained were statistically analyzed using 2-way ANOVA and t-test at a significance level of 95%. The results were as follows: 1. There was no significant difference between bulk filling and incremental filling. 2. There was no significant difference between pulpal wall and axial wall, either. Within the limit of this study, it was concluded that microtensile bond strength was not affected by the filling technique and the site of cavity walls.