• 한국건축시공학회지
• /
• 제17권2호
• /
• pp.127-134
• /
• 2017

최근 국내 아파트의 외벽 거푸집공사의 경우 대부분 갱폼 시스템을 통해 철근콘크리트 구조체를 시공하고 있다. 이러한 갱폼 거푸집을 사용한 콘크리트의 경우는 거푸집 탈형 후 외부환경에 노출되고 특히, 건조한 봄, 가을과 일사량이 높은 서중시기의 벽량이 많은 아파트 측벽에 다량의 균열이 발생되어지고 있다. 이에, 본 연구에서는 신축 아파트 건설현장 중심으로 균열량이 많은 아파트 측벽부분의 갱폼시스템에 습윤양생 자동설비장치를 적용하여 초기 콘크리트 양생에 필요한 수분을 공급함으로써 콘크리트의 품질확보와 다량의 측벽균열 저감을 통한 습윤양생 자동장치의 효율성 및 활용성을 검토하고자 하였는데, 그 결과, 양생 효과 및 낙수량 고려 시 습윤양생 자동장치에 0.3mm 사이즈의 노즐을 사용하여 살수양생을 실시할 경우, 자원낭비 없이 콘크리트의 품질향상 및 균열저감에 효과적인 것으로 판단되었다.

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.171-178
• /
• 2019

Auto Climbing Formwork System (ACS) for construction of high-rise building is a construction method for automatically lifting the formwork system supported by the anchor on the pre-constructed concrete wall. It has excellent construction speed and quality, but it has the possibility of structural failure depending on the quality of concrete and also has low economical efficiency due to the use of foreign technology. In order to overcome these problems, this study conducted an optimum design for the development of a new concept of Corner Supported Auto Climbing System (CS-ACS) in conjunction with the development of corner steel-reinforced concrete core wall system. For the design the formwork system, the basic module and structural member compositions were planned, and the structural analysis program was used to analyze the optimum member's cross section and spacing. As a result, the horizontal displacement and the stress of the horizontal members were influenced by the spacing more than the cross-section of the member. On the other hand, vertical members did not affect the displacement and stress of the formwork system. The form tie was very effective in controlling the displacement when adjusting the spacing of the horizontal members, but when the spacing of the form tie is more than 1,500mm, it is analyzed that form tie is yielding in basic module. When the span of the formwork system is more than 30m, it is analyzed that the basic module needs to be changed because of the increase of overall displacement.

• 자연, 터널 그리고 지하공간
• /
• 제13권2호
• /
• pp.41-49
• /
• 2011

양북터널은 굴착과 동시에 라이닝콘크리트를 타설하였다. 터널굴착과 라이닝콘크리트의 동시시공을 위한 적정시공 Cycle을 결정하고, 이에 따른 양생기간과 양생온도를 설정하는 순으로 시험하였다. 라이닝콘크리트는 품질관리를 위해 보온장치를 탑재한 Sliding form과 양생대차를 운영하고, 균열을 최소화하기 위해 양생온도와 양생시간 및 탈형강도 등을 시험에 의해 결정하였다. 시험과정은 터널내부와 라이닝콘크리트 내부온도를 계절별로 측정하고, 양생온도별로 콘크리트의 강도를 측정하였다. 거푸집 탈형시 콘크리트 온도가 터널내부의 온도로 수렴하기까지는 $15{\sim}20^{\circ}C$의 차이로 측정되었고, 거푸집 탈형을 위한 콘크리트 초기강도 4MPa을 발현하는데는 양생온도에 따라 차이가 발생하지만 시공 Cycle에 적합한 양생시간은 약 20시간이고, 이 때의 양생온도는 $23^{\circ}C$ 이상이었다. 위의 시험결과대로 현장에서 라이닝콘크리트를 양생한 결과 시공 Cycle과 압축강도 및 콘크리트면의 외관 등이 만족한 결과를 나타내었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.60-61
• /
• 2017

In free-formed formwork, there is a problem that the productivity of the construction is deteriorated due to the expensive form, the long manufacturing period, and the high degree of construction difficulty. In order to solve these limitations, there is a need to research improvement from the phase of manufacturing free-formed form. Therefore, this study is to derive significant technical characteristics using QFD approach as a preliminary study to develop manufacturing system of the free-formed form for improving the productivity of free-formed construction formwork. This study employs the QFD to reflect users' needs into technical characteristics, and analyze correlation between users' requirements and the technical characteristics, then weights them by their importance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.29-30
• /
• 2012

The precast concrete column-beam structure, Green Frame, allows the main structural members such as precast concrete column and beam to be produced on the site, resulting in a reduction of transportation cost and the margin of plant. However, existing plywood from for in-situ production of precast concrete members has problems like putting in inordinate human resource, falling-off in quality and workability. To solve those problems, form system for in-situ production of precast concrete members shall be developed. In this regard, this study aims to analyze the structural concept of from system for in-situ production. The result of this study will use for development of form system for in-situ production.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2003년도 춘계 학술논문발표회 논문집
• /
• pp.213-217
• /
• 2003

고가도로 또는 돌로 교량공사는 중요하고 또 소요에 따라 건설공사가 전국에서 진행되고 있다. 또한 이들 공사과정에서 발생되는 사고들이 있고 잠재위험성은 상존하고 있다. 상기 원인들에는 상부 콘크리트 스라브판 거푸집 지지대의 시스템, 지지대보강법, 지지대의 기초판, 기초판 저면의 토질상태, 그 위에 보조로 타설버림 콘크리트의 신뢰도 등을 들 수 있겠다.(중략)

• 한국건축시공학회지
• /
• 제2권4호
• /
• pp.55-63
• /
• 2002

• KIEAE Journal
• /
• 제8권2호
• /
• pp.87-92
• /
• 2008

Underground building constructions are recently more important because the ratio of underground area is increasing in the huge and high-rise building construction projects. For reducing the total building construction periods, it is required to reduce not only the over-ground structural work periods but also the underground structural work periods. Therefore, this study is proposed the non-supporting system forms for single face walls in underground building construction by one of the methods for reducing the underground structural work periods and investigated the applicability of the non-supporting system forms by analyzing the case-study in civil construction project. In regard of construction duration, the results of analyzing the case-study showed that the non-supporting system forms are better than the euro forms with soldier system for single face walls in underground building construction. In addition, it is showed that the cost of these two forms is similar and usage the working space and safety in non-supporting system forms are better that those of the euro forms with soldier system, too.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.7-8
• /
• 2015

Formwork accounts for 10% of the total construction cost and 30~40% of the framework cost, which is a fairly large part. Various system forms were developed for improved economic feasibility and constructability of formwork and for reduced construction duration. In general, the price of system forms per unit area is higher than that of the conventional method, yet the total construction cost can be reduced through higher reusability and constructability. However, if the reusability of forms is excessively increased to cut down the material cost, it may increase the construction duration, which will result in cost increase. On the other hand, if the reusability is decreased for reduction of construction duration, it may lead to cost increase caused by excessive input of materials. To solve such a problem, an algorithm for simplified reuse planning that meets the requirements of construction duration, cost, quality and safety is required. In this regard, the study intends to perform a fundamental research for development of reuse planning automation algorithms on system forms that are used on girders and beams.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.197-198
• /
• 2014

The concrete work of bridge decks is performed in a high place, which may reduce safety and productivity. In addition, the conventional method for deck forms require a great deal of manpower, and a form (sheathing) board is damaged when removed after curing. As a result, the concrete deck work of bridge construction becomes the cause of delayed construction and increased cost. To solve these problems, SMART form, a system form, is developed. SMART form is a temporary device for easier installation and removal, by mounting it to the lower flange of a bridge girder and using a mechanical behavior of the form system for deck concrete pouring. For stable installation and removal of the developed SMART form, geometric behaviors should be analyzed to prove its validity. Furthermore, the validity of geometric behaviors when the SMART form size is altered in response to the various arrangement of bridge girders should be proved. Thus, the study is intended to analyze the geometric validity of the form system for bridge deck concrete pouring. The structural stability of the form system for bridge deck concrete pouring can be secured, which will be applied in the field.